









Brass Sheet
Brass Sheet based on electrolytic copper, zinc and trace elements as its raw material, through processing by ingot, hot rolling, cold rolling, heat treatment, surface cleaning, cutting, finishing, and then packing. Material processes performance, plasticity, mechanical properties, corrosion resistance, performance and good tin.
It has been widely used in electrical, automotive, communications, hardware, decoration and other industries.
- Description
- Specifications
- Inquiry
Product Introduction
Brass Sheet based on electrolytic copper, zinc and trace elements as its raw material, through processing by ingot, hot rolling,
cold rolling, heat treatment, surface cleaning, cutting, finishing, and then packing. Material processes performance, plasticity,
mechanical properties, corrosion resistance, performance and good tin.
It has been widely used in electrical, automotive, communications, hardware, decoration and other industries.
Main Technical Parameters
2-1Chemical Composition
Name |
Alloy No. |
Chemical Composition (%, Max.) |
||||||||
Cu |
Fe |
Pb |
Al |
Mn |
Sn |
Ni |
Zn |
Impurity |
||
Brass |
H96 |
95.0-97.0 |
0.10 |
0.03 |
— |
— |
— |
0.5 |
Rem |
0.3 |
H90 |
88.0-91.0 |
0.10 |
0.03 |
— |
— |
— |
0.5 |
Rem |
0.3 |
|
H85 |
84.0-86.0 |
0.10 |
0.03 |
— |
— |
— |
0.5 |
Rem |
0.3 |
|
H70 |
68.5-71.5 |
0.10 |
0.03 |
— |
— |
— |
0.5 |
Rem |
0.3 |
|
H68 |
67.0-70.0 |
0.10 |
0.03 |
— |
— |
— |
0.5 |
Rem |
0.3 |
|
H65 |
63.5-68.0 |
0.10 |
0.03 |
— |
— |
— |
0.5 |
Rem |
0.3 |
|
H63 |
62.0-65.0 |
0.15 |
0.08 |
— |
— |
— |
0.5 |
Rem |
0.5 |
|
H62 |
60.5-63.5 |
0.15 |
0.08 |
— |
— |
— |
0.5 |
Rem |
0.5 |
2-2 Alloy Table
Name |
China |
ISO |
ASTM |
JIS |
Brass |
H96 |
CuZn5 |
C21000 |
C2100 |
H90 |
CuZn10 |
C22000 |
C2200 |
|
H85 |
CuZn15 |
C23000 |
C2300 |
|
H70 |
CuZn30 |
C26000 |
C2600 |
|
H68 |
— |
— |
— |
|
H65 |
CuZn35 |
C27000 |
C2700 |
|
H63 |
CuZn37 |
C27200 |
C2720 |
|
H62 |
CuZn40 |
C28000 |
C2800 |
2-3 Features
2-3-1 Specification Unit:mm
Name |
Alloy No.(China) |
Temper |
Size(mm) |
||
Thickness |
Width |
Length |
|||
Brass |
H59 H62 H63 H65 H68 H70 |
R |
4~8 |
600~1000 |
≤3000 |
H62 H65 H68 |
Y Y2 |
0.2~0.49 |
600 |
1000~2000 |
|
0.5~3.0 |
600~1000 |
1000~3000 |
Temper Mark:O. Soft;1/4H. 1/4 Hard;1/2H. 1/2 Hard;H. Hard;EH. Ultrahard;R. Hot Rolled.
2-3-2 Tolerance Unit: mm
Thickness |
Width |
|||||
Thickness Allow Deviation ± |
Width Allow Deviation ± |
|||||
<400 |
<600 |
<1000 |
<400 |
<600 |
<1000 |
|
0.5~0.8 |
0.035 |
0.050 |
0.080 |
0.3 |
0.3 |
1.5 |
0.8~1.2 |
0.040 |
0.060 |
0.090 |
0.3 |
0.5 |
1.5 |
1.2~2.0 |
0.050 |
0.080 |
0.100 |
0.3 |
0.5 |
2.5 |
2.0~3.2 |
0.060 |
0.100 |
0.120 |
0.5 |
0.5 |
2.5 |
Temper |
Tensile Strength N/mm2 |
Elongation ≥% |
Hardness HV |
|
M |
(O) |
≥290 |
35 |
— |
Y4 |
(1/4H) |
325-410 |
30 |
75-125 |
Y2 |
(1/2H) |
340-470 |
20 |
85-145 |
Y |
(H) |
390-630 |
10 |
105-175 |
T |
(EH) |
≥490 |
2.5 |
≥145 |
R |
— |
— |
— |
Temper Mark:M. Soft;Y4. 1/4 Hard;Y2. Hard;Y. Hard;T. Ultra hard
Item Name | Brass Sheet/Brass Plate |
Grade | C21000, C22000, C23000, C24000, C26000, C26800, C27000, 27200, C34000, C34200, C28000, C35000, C36000, C37700, C38500, C38000, C68700, etc |
Standard | GB, ASTM, UNS, SAE, DIN, SUS, JIS |
Thickness | 0.20mm-5.00mm, or required |
Width | 10.00--1200.00 |
Length | As required |
Finish | 2B, BA, No.4, 8K, Hairline, Embossed, Etched, Vibration, PVD color coated, Titanium, Sand Blasted, Anti-fingerprin. |
Color | Golden, Black, Sapphire Blue, Brown, Rose gold, Bronze, Purple, Gray, Silver, Champagne, Violet, Blue Diamond |
Application | Interior, Exterior, Architectural, Bathroom Decoration, Elevator Decoration, Hotel decoration, Kitchen Equipment, Ceiling, Cabinet, Kitchen sink, Advertising Nameplate |
Lead Time | 10-15 Days after payment |
Packing | PVC, waterproof paper, strong sea-worthy wooden package,or as required. |
OEM | Accept |
Sample | Available |
Related Products
-
Read MoreQuick View
Brass Bar
-
Read MoreQuick View
Aluminium Coil
Aluminium coil is a rolled product, produced in a coiled form of a continuous strip, and has an inner diameter and outer diameter. ID from50mm to 1000mm. Aluminium alloy grade including 1xxx, 2xxx, 3xxx, 4xxx, 5xxx, 6xxx, 7xxx, 8xxx. But the most common is 1050, 3003, 6061 and 5251 aluminum coil. Thickness from 0.045-80mm, width from 60-2650mm. Common widths of aluminum coil is 800mm,1000mm, 1250mm,1450mm and 1500mm.
Multiple industries rely on aluminium coils for a variety of applications, such as automotive, construction, heat transfer, pharmaceutical, electrical, and food industry. Compared to other materials, aluminum is a far superior material in many instances. Aluminum coil can be supplied with standard mill finish, or it can be brushed, checkered, color coated, satin-finished and anodized. Aluminium sheet or aluminium foil can be cut into coils as per client’s requirements.
-
Read MoreQuick View
Aluminium Strip
Aluminum sheet & foil in the form of rolls with a thickness > 0.2mm, a width 20mm to 100mm is generally called aluminium strip. The common name for aluminium strip that is produced in small strip widths is usually split strip. Aluminium sheets are cut into a required by slitting tooling, the raw material of aluminum strip is pure aluminium or aluminum alloy hot rolled cast-rolling aluminum coil and hot-rolled coil. Through a cold-rolled machine to form different thickness and width of the rolling sheet and aluminum coil, and then the vertical cutting and slitting machine for different width of the strip. And the thickness<0.2mm, we call it aluminum foil strip or aluminum foil coil.
-
Read MoreQuick View
Copper Coils
It may seem that a copper coil is a simple piece of coiled wire that can be wound and put to use. As with any form of industrial product, copper coils have to be precisely engineered to fit an application. The winding process has to be completed with precision to ensure the proper distance between the wires and the diameter of the opening.
Each product that uses copper coils requires that a certain number of turns be made to provide the correct amount of resistance. Inaccurate calculations can lead to inefficiency and possible failure of the coil or device. For this reason, the engineers at Metal Associates guarantee that they have closely examined the specification of an application such that the diameter, spacing, wire thickness, and number of turns exactly matches the design of the product where the copper coil will be used.
-
Read MoreQuick View
Aluminium foil
Aluminium foil is aluminium prepared in thin metal leaves with a thickness of less than 0.2mm (7.9 mils); thinner gauges down to 4 micrometers are also commonly used. Standard household foil is typically 0.016 mm (0.63 mils) thick, and heavy-duty household foil is typically 0.024 mm (0.94 mils). And the air conditioner foil can be thinner than 0.0047mm, and some food foil thinner than 0.002mm. The foil is pliable and can be readily bent or wrapped around objects. Thin foils are fragile and are sometimes laminated with other materials such as plastics or paper to make them stronger and more useful. It’s used industrially for a variety of purposes, including packing, insulation and transportation. At home, people use aluminum foil for food storage, to cover baking surfaces and to wrap foods, such as meats, to prevent them from losing moisture while cooking.
-
Read MoreQuick View
Brass Strips
Brass Strip has higher strength than copper, good electrical and thermal conductivity, high corrosion resistance in the atmosphere and freshwater, and good plasticity, easy to cold and hot pressure processing, easy welding, forging and tin plating, no stress corrosion cracking.
-
Read MoreQuick View
Stainless Bar
A stainless steel bar stock is often used for production line machinery or in other industrial settings where durability is required. Stainless steel round bar types can be found in many different shapes such as hexagon, square, or round bars. Stainless bar stock is a material that is non-corrosive, corrosion resistant, and durable. It can be used in a variety of industries such as automotive, aerospace, construction, and manufacturing.
Stainless steel bar stock is the highest quality type of stainless steel in the industry. They are made with high-quality materials that make them resistant to corrosion and other environmental conditions. The stainless bar stock also has greater tensile strength than other types of stainless steel.
Stainless steel round rod products or round bars are commonly used for manufacturing products like car rims, motorcycle rims, bicycle rims, and more. These types of bars are typically made by rolling up sheets of stainless steel into long tubes before welding them together at the ends to create round rods or round bars that can be cut into smaller pieces
-
Read MoreQuick View
Titanium Strip
Titanium strip is produced from the titanium sheet. Usually cold-rolled the titanium sheet by a small mill with annealing for several times, then slitting shear to titanium strips according to customer requirements. The advanced equipment, rolling process, process control, annealing temperature and return time control ensured its smoothness and finish, effectively improved the quality of our products.
-
Read MoreQuick View
Brass Coil
Brass coil has excellent plasticity (best in brass) and high strength, good machinability, easy to weld, very stable to general corrosion, but prone to corrosion cracking; brass coil is copper and the alloy of zinc is named for its yellow color.
The mechanical properties and wear resistance of the brass coil are very good, and can be used to manufacture precision instruments, ship parts, shells of guns, etc. Brass knocks up and sounds good, so instruments such as cymbals, cymbals, bells, and numbers are made of brass. According to the chemical composition, brass is divided into ordinary copper and special brass.
-
Read MoreQuick View
Copper Foil
Copper is a reddish brown metallic element with outstanding characteristics such as good ductility, ductility, heat and conductivity
Pure copper is a very soft and ductile metal To achieve the required performance, we can alloy with other metals Brass and bronze are widely used copper alloys
Copper foil is made of copper or copper alloy by hot rolling and cold rolling The thickness of copper foil ranges from 0.03mm to 0.2mm, and the width and length can be customized according to customer requirements
- DIN2391 Precision Steel Tube
- EN10305-1/4 Precision Steel Tube
- EN10305-2/3/5/6 Precision Tubes
- ISO8535-1 Fuel Injection Tube
- Single/Doulbe Wall Bundy Tube
- Boiler & Pressure Steel Tubes
- Seamless Honed/SRB Steel Tube
- Stainless Capillary Steel Tubes
- Seamless Stainless Tubes & Pipes
- Welded Stainless Tubes & Pipes
- Injection & Control Line Tubes
- Nickel Alloy Tubes & Pipes
- Non-ferrous Capillary Tubes
- Aluminium Tubes & Pipes
- Brass Tubes & Pipes
- Copper Tubes & Pipes
- Copper Tube & Pipe Fittings
- Titanium Tubes & Pipes
- Extruded/Welded Fin Tube
- Non-Ferrous Precision Tube
- Special Shaped Steel Tubes
- Metallic Coil/Foil/Sheet/Strip