Tubo di curvatura a U a bassa lega
Il tubo di curvatura a U viene eseguito con il metodo di lavorazione a freddo e viene eseguito al raggio di curvatura necessario secondo i disegni del cliente. Il tubo/tubo con curvatura a U può essere prodotto con una vasta gamma di materiali per tubi contenenti acciai inossidabili ad alto e basso snervamento, acciai legati, acciai al carbonio,Monel , Inconel, Hastelloy,duplex , Super Duplex,titanio,lega di rame e leghe Cr-Ni. Di solito curve a U prodotte da tubi senza saldatura, può essere ulteriormente personalizzato in termini di spessori e dimensioni secondo le esigenze specifiche dei nostri clienti. Sono facili da assemblare ulteriormente fasci tubieri.
Grand fornisce tubi U bend in diversi settori per una vasta gamma di applicazioni come in caldaie, Condensatori, Super riscaldatori,fasci tubiferi per scambiatori di calore, Refrigeratori/Intercooler, Refrigeratore, E così via. Questi vengono utilizzati anche in settori dissimili come negli impianti di fertilizzanti, Industria saccarifera, Acciaierie,Olio & Impianti a gas, Chimico & Impianti petrolchimici, Raffinerie, Centrali, Impianti di energia rinnovabile, ecc.
- Descrizione
- Inchiesta
Il tubo di curvatura a U viene eseguito con il metodo di lavorazione a freddo e viene eseguito al raggio di curvatura necessario secondo i disegni del cliente. Il tubo/tubo con curvatura a U può essere prodotto con una vasta gamma di materiali per tubi contenenti acciai inossidabili ad alto e basso snervamento, acciai legati, acciai al carbonio,Monel , Inconel, Hastelloy,duplex , Super Duplex,titanio,lega di rame e leghe Cr-Ni. Di solito curve a U prodotte da tubi senza saldatura, può essere ulteriormente personalizzato in termini di spessori e dimensioni secondo le esigenze specifiche dei nostri clienti. Sono facili da assemblare ulteriormente fasci tubieri.
Grand fornisce tubi U bend in diversi settori per una vasta gamma di applicazioni come in caldaie, Condensatori, Super riscaldatori,fasci tubiferi per scambiatori di calore, Refrigeratori/Intercooler, Refrigeratore, E così via. Questi vengono utilizzati anche in settori dissimili come negli impianti di fertilizzanti, Industria saccarifera, Acciaierie,Olio & Impianti a gas, Chimico & Impianti petrolchimici, Raffinerie, Centrali, Impianti di energia rinnovabile, ecc.
Production process:
straight pipe – bending before 100% flaw detection – reliable bending machine and precision bending mould – bending after the U-shaped part of the electric heating stress relief annealing – bending after 100% water pressure
What special:
All the above mentioned material can be supplied:in straight length U-bent finned with low fins
These pipe/tube Bend are seamless,by Large-radius Pipe Bend for pneumatic conveyors.
Pipe Bend are absolutedly wrinkle-free,no start-up bulges,Extremely low ovality Pipe Bend.
Visually aesthetic surface,Deburred sawing edges,No scratching or scoring.
Leg extension each side, Easy installation,Safe for use with food.
Steel and alloy steel U bent Tube standard and material grade:
ASTM A213 T5 T11 T12 T22 T9 T91 alloy steel U tube for Heat Exchanger Tube Boiler Condensers Super Heaters Coolers/Inter-coolers Chiller.
ASTM/ASME A/SA179 Steel Seamless U Tube bundles,for Heat Exchanger Tube Boiler Condensers Super Heaters Coolers/Inter-coolers Chiller.
ASTM/ASME A/SA192 Seamless Steel U Tubes tube bundles.
ASTM/ASME A/SA210 GrA1 C Seamless Steel U Tubes for Boiler, Superheater, Heat-Exchanger, and Condenser U Tubes, tube bundles.
JIS G3461 STB340 STB410 STB510 Seamless Steel U Tubes, tube bundles for Heat Exchanger,Condensatore,caldaia.
JIS G3462 STBA12 STBA13 STBA20 STBA22 STBA24 Seamless Steel U Tubes, tube bundles for Heat Exchanger,Condensatore
DIN17175 St35.8 St45.8 15Mo3 13CrMo44 10CrMo910Seamless Steel U Tubes, tube bundles for Heat Exchanger Condenser
EN10216-1 P195TR1 P235TR1 P265TR1Seamless Steel U Tubes, tube bundles for Heat ExchangerCondenser
EN10216-2 P195GH P235GH P265GHSeamless Steel U Tubes, tube bundles for Heat Exchanger Condenser
ASTM A179 | It is used for heat exchanger, condenser and similar heat conveying equipments |
ASTM A213 | It is used for boiler and super heater min wall thickness seamlless steel ferrite and austenitic steel tube and heat exchanger austenitic steel tube. |
ASTM A210 | It is used for boiler and boiler flue tubes, including safe end, vault and supporting tube, and superheater wall thickness min or medium carbon steel tube. |
JIS G3461/2 | It is used for boiler and heat exchanger tube inside&outside. |
EN10216-1/2 | It is applicable to manufacture pipelines, vessel, equipment, pipe fittings and steel structure in high pressure condition. |
DIN17175 | Its used for the pipelines of boiler industry. |
Composizione chimica:
Standard | Grado | Composizione chimica(%) | Proprietà meccaniche | ||||||||
C | Si | Mn | P | S | Cr | Mo | Resistenza alla trazione(Mpa) | Snervamento(Mpa) | Allungamento(%) | ||
ASTM A179 | A179 | 0.06-0.18 | – | 0.27-0.63 | ≤0.035 | ≤0.035 | – | – | ≥325 | ≥180 | ≥35 |
ASTM A213 | T11 | 0.05-0.15 | 0.50-1.00 | 0.30-0.60 | ≤0.025 | ≤0.025 | 1.00-1.50 | 0.44-0.65 | ≥415 | ≥205 | ≥30 |
T12 | 0.05-0.15 | ≤0.50 | 0.30-0.61 | ≤0.025 | ≤0.025 | 0.80-1.25 | 0.44-0.65 | ≥415 | ≥220 | ≥30 | |
T22 | 0.05-0.15 | ≤0.50 | 0.30-0.60 | ≤0.025 | ≤0.025 | 1.90-2.60 | 0.87-1.13 | ≥415 | ≥205 | ≥30 | |
T91 | 0.05-0.15 | ≤0.50 | 1.00-1.50 | ≤0.035 | ≤0.035 | – | – | ≥585 | ≥415 | ≥30 | |
ASTM A210 | A-1 | 0.13-0.19 | ≥0.1 | 0.45-0.65 | ≤0.035 | ≤0.035 | – | – | ≥415 | ≥255 | ≥30 |
C | 0.18-0.24 | ≥0.1 | 0.80-1.10 | ≤0.035 | ≤0.035 | – | – | ≥485 | ≥275 | ≥30 | |
JIS G3461 | STB340 | ≤0.18 | ≤0.35 | 0.30-0.60 | ≤0.035 | ≤0.035 | – | – | ≥340 | ≥175 | ≥35 |
STB410 | ≤0.32 | ≤0.35 | 0.30-0.80 | ≤0.035 | ≤0.035 | – | – | ≥410 | ≥255 | ≥25 | |
STB510 | ≤0.25 | ≤0.35 | 1.00-1.50 | ≤0.035 | ≤0.035 | – | – | ≥510 | ≥295 | ≥25 | |
JIS G3462 | STBA12 | 0.10-0.20 | 0.10-0.50 | 0.30-0.80 | ≤0.035 | ≤0.035 | – | 0.45-0.65 | ≥380 | ≥205 | ≥30 |
STBA13 | 0.15-0.25 | 0.10-0.50 | 0.30-0.80 | ≤0.035 | ≤0.035 | – | 0.45-0.65 | ≥410 | ≥205 | ≥30 | |
STBA20 | 0.10-0.20 | 0.10-0.50 | 0.30-0.60 | ≤0.035 | ≤0.035 | 0.50-0.80 | 0.40-0.65 | ≥410 | ≥205 | ≥30 | |
STBA22 | ≤0.15 | ≤0.50 | 0.30-0.60 | ≤0.035 | ≤0.035 | 0.80-1.25 | 0.45-0.65 | ≥410 | ≥205 | ≥30 | |
STBA24 | ≤0.15 | ≤0.50 | 0.30-0.60 | ≤0,030 | ≤0,030 | 1.90-2.60 | 0.87-1.18 | ≥410 | ≥205 | ≥30 |
Standard | Grado | Composizione chimica(%) | Proprietà meccaniche | ||||||||
C | Si | Mn | P | S | Cr | Mo | Resistenza alla trazione(Mpa) | Snervamento(Mpa) | Allungamento(%) | ||
DIN17175 | St35.8 | ≤0.17 | 0.10-0.35 | 0.40-0.80 | ≤0,030 | ≤0,030 | – | – | 360-480 | ≥235 | ≥25 |
St45.8 | ≤0,21 | 0.10-0.35 | 0.40-1.20 | ≤0,030 | ≤0,030 | – | – | 410-530 | ≥255 | ≥21 | |
15Mo3 | 0.12-0.20 | 0.10-0.35 | 0.40-0.80 | ≤0,030 | ≤0,030 | – | 0.25-0.35 | 450-600 | ≥270 | ≥20 | |
13CrMo44 | 0.10-0.18 | 0.10-0.35 | 0.40-0.70 | ≤0,030 | ≤0,030 | 0.70-1.10 | 0.45-0.65 | 440-590 | ≥290 | ≥20 | |
10CrMo910 | 0.08-0.15 | ≤0.50 | 0.40-0.70 | ≤0,030 | ≤0,030 | 2.00-2.50 | 0.90-1.20 | 450-600 | ≥280 | ≥18 | |
EN10216-1 | P195TR1 | ≤0.13 | ≤0.35 | ≤0.70 | ≤0.025 | ≤0.020 | ≤0.30 | ≤0.08 | 320-440 | ≥195 | ≥27 |
P235TR1 | ≤0.16 | ≤0.35 | ≤1.20 | ≤0.025 | ≤0.020 | ≤0.30 | ≤0.08 | 360-500 | ≥235 | ≥25 | |
P265TR1 | ≤0.20 | ≤0.40 | ≤1.40 | ≤0.025 | ≤0.020 | ≤0.30 | ≤0.08 | 410-570 | ≥265 | ≥21 | |
EN10216-2 | P195GH | ≤0.13 | ≤0.35 | ≤0.70 | ≤0.025 | ≤0.020 | ≤0.30 | ≤0.08 | 320-440 | ≥195 | ≥27 |
P195GH P235GH P265GH | ≤0.16 | ≤0.35 | ≤1.20 | ≤0.025 | ≤0.020 | ≤0.30 | ≤0.08 | 360-500 | ≥235 | ≥25 | |
P265GH | ≤0.20 | ≤0.40 | ≤1.40 | ≤0.025 | ≤0.020 | ≤0.30 | ≤0.08 | 410-570 | ≥265 | ≥23 |
tubo caldaia,High pressure boiler tubes are used in high temperature and high pressure conditions. Steel tubes are subject to oxidation and corrosion under the action of high temperature flue gas and water vapor. The steel tube is required to have high lasting strength, high oxidation resistance corrosion performance and good stability.