A355 Tubo in acciaio legato senza saldatura

ASTM A335 is the seamless ferritic alloy steel pipe that used in high-temperature services and boiler industry. Common used Grade P5, P9, P11, P22, P91.

ASTM A335 pipe also named as ASME S/A335 Chrome-Moly pipe, it is a type of seamless pipe used in high temperature environments of 540 – 750 °C. It covers nominal wall and minimum wall thickness pipe that with alloy material. The pipe under this specification shall be suitable for flessione, flanging, and all the other similar processing and formations. Although it shall be good for fusion welding. the material could also used to produce pipe fittings like elbow, tee, reducers and flanges.

Grade P5, P9, P11, P22 and P91 pipe refer pipe fittings material in ASTM A234 WP5, WP9 ,WP11, WP22 WP91, where flange material in ASTM A182 F5, F9, F11, and so on. They have similar chemical composition and mechanical properties.

Standard and Grades: ASTM A335 Grade P5, P9, P11, P22, P91
Material types: Chrome alloy steel pipe
Manufacturing types: Seamless pipe by hot rolled o Trafilato
Sizes: 1/2” to 24”
Spessore della parete: SCH 40, SCH STD, SCH 80, SCH XS, SCH 160
Lunghezza: 6 Metri, 12 meters or customized.

ASTM A335 Pipe Features

I tubi A335 hanno un alto livello di presenza di cromo e molibdeno. Mentre il molibdeno aumenta la resistenza complessiva, resistenza, elasticità, temprabilità e qualità complessiva, Moly assicura che il materiale sia più resistente all'ammorbidimento, frena la crescita dei cereali e diminuisce le possibilità di infragilimento. È il singolo additivo responsabile dell'aumento della resistenza alle alte temperature e migliora anche la resistenza alla corrosione dell'acciaio.

Chromium – Key Chemical Element for A335 Pipe

Chromium is a key component that is used in the manufacture of stainless steel. If the chromium levels are above 12%, it can be classified as stainless steel. The oxidation resistance potential of chrome is irreplaceable even in elevated temperatures. The hardness, tensile and yield strength is better at standard temperatures. Due to the composition of the material, it is ideal to be used in power plants, Raffinerie, petro-chemical plants and other oil field services when there is transportation under high temperatures and pressures involved.

A335 Pipe Chemical Composition

Proprietà meccaniche

un: P91 type 1 e 2 hardness range from 190 A 250 [HBW] o 196 A 265 [HV] o 91 HRBW to 25 HRC (Acciaio al collo).

Tolerance in wall thickness:

Permissible variations for Outer Diameter:

P91 pipe – A Premium Alloy Pipe

ASTM A335 Grade P91 pipe is premium grade pipe applied for high pressure boiler. And P91 pipe is ideal when it comes to bending, flanging or when it is used in similar operations such as welding. The material of steel should stick to the composition of chemicals, tensile property and the requirements of hardness.

ASTM A335 P91 alloy steel pipe and high pressure boiler pipes are the two variants available and the range is dependent based on the size, which is solely based on the usage. The length of the pipe will be subject to hydrostatic test and there will also be a non-destructive examination based on the specifications.

Di conseguenza, The chrome moly pipe finds high usage in power generation industry and petrochemical industry owing to its resistance to corrosion, Resistenza alla trazione, strength for high temperature owing to its cost-effectiveness.

P5, P9, P11, P22, P91 Pipe Application

This chrome moly pipe featured grades are ASTM A335 P5, P9, P11, P22, P91, so also it could be called as P Grade pipe in some cases.

P11 pipe, P22 pipe and P91 pipes are used in power industry and petro-chemical plants, meanwhile, P5 and P9 pipe generally find usage in refineries.

Ordering Information

To purchase ASTM A335 pipe should include the following, as required, to describe the desired material adequately:

un. Quantity (piedi, metres, or number of lengths),
b. Name of material (seamless alloy steel pipe),
c. Grado (Table 1)
d. Manufacture (hot-fifinished or cold-drawn),
e. Size useing in NPS & Schedule number, or OD (ID) and Wall thickness (minimum/nominal)
f. Lunghezza (specifific or random),
g. End fifinish (Ends Section of Specifification A999/A999M),
h. Optional requirements (Hydrostatic Test Required or not and Permissible tolerance in weight.)
i. Specifification designation, and Special requirements or any supplementary requirements selected, o entrambi.