Titanium bar, rod specifications
- 描述
- 查询
标准 | ASTM B348/ASME SB348, ASTMF67, ASTM F136, ISO-5832-2(3), AMS4928, MIL-T-9047G, JIS etc |
年级 | ▲ Gr1, Gr2, Gr3, Gr4▲ Gr5 (Ti-6Al-4V)
▲ Gr7 (钛-0.2Pd) ▲ Gr9 (Ti-3Al-2.5V) ▲ Gr12 (钛-0.3莫-0.8镍) ▲ Gr23 (Ti-6Al-4V ELI) |
Titanium Round Bar Size | 直径: 2~300mm |
Titanium Square Bar Size | 5*5mm~100*100mm Thickness: 2~300mm |
Titanium Flat Bar Size | 宽度: 10~300mm Thickness: 2~300mm |
Titanium Hex Bar Size | 2~300mm |
长度 | 100~3000mm |
Technical | 伪造, Machining |
Delivery state | Hot working state(R), Cold working state(Y), Annealing state(M) |
表面 | Acid surface, Polishing, Sand Blasting Finished, 明亮, 抛光 |
形状 | 圆, Flat, 广场, Hexagonal, Rectangle |
Titanium Rod Form | 圆, 广场, Hex(A/F), Rectangle, Billet |
应用 | Metallurgy, 电子学, 医疗, 化学的, 石油, 药, 航空 航天, 等. |
What is a titanium bar, rod?
Titanium rod is a metal bars crafted from Titanium Ore. It has good performance of wear-resisting and anti-corrosion. It has low density and high strength, making it an essential structural material for industrial production.
Production Process of Titanium Bar, rod
What are the advantages of using a titanium bar, rod?
- Small density, 高比强度
The density of titanium metal is 4.51g/CM3, which is higher than aluminum and lower than steel, copper and nickel, but the specific strength is the first metal.
- High corrosion resistance
In the air or oxygen-containing media, the surface of titanium generates a dense, strong adhesion, inert oxide film, which protects the titanium substrate from corrosion.
- High resistance to damping
Titanium metal is subject to mechanical vibration, electrical vibration, compared with steel, copper metal, its own vibration decay time is long
- Tensile strength is close to its yield strength
Due to the yield limit of titanium and the modulus of elasticity ratio is large, so that the titanium molding rebound ability is large
- Healthy to Body
Not contain harmful metals has good compatibility with your body’s blood and tissues.
What are the quality application standards for titanium bar, rod?
ROD, BAR & FORGINGS | ||
大小: Bar & RodFull Range of sizes in all grades |
GRADE | SPECIFICATIONS |
6AL-4V, 6AL-4V ELI | AMS-4928, 4930,4965, 4967, MIL-T-9047, AMS-T-9047, ASTM-F-367 |
|
6AL-2SN-4ZR-2MO | AMS04975, MIL-T-9047, AMS-T-9047 | |
6AL-6V-25SN | AMS-4978, MIL-T-9047, AMS-T-9047 | |
5AL-2.55N | AMS-4926, 4966, MIL-T-9047, AMS-T-9047, B50TF22 | |
8AL-1MO-IV | AMS-4972, 4973, MIL-T-9047, AMS-T-9047 | |
CP-GRADES 1,2,3,4,7 | AMS-4921, MIL-9047, ASTM-B-348, ASTM-F-67 |
Standard specifications for titanium bar
- Commercially Pure Titanium
- 钛合金
Grade of titanium
- Ti Grade 1 is an unalloyed, low strength Ti product containing low oxygen with high formability; this Ti grade is used in airframes, 热交换器, and desalination units.
- Ti Grade 2 is an unalloyed, medium-strength titanium product. This titanium grade is used in airframes, aircraft engines, and marine parts; good weldability and corrosion resistance are its distinguishing characteristics.
- Ti Grade 3 is an unalloyed, 高强度, titanium product providing excellent corrosion resistance and good weldability. This titanium grade is primarily used in airframe and aircraft engine parts.
- Ti Grade 4 is the highest strength pure unalloyed titanium product. This titanium grade is used almost exclusively for airframe, aircraft engine parts, 海产的, surgical implants, hydraulic tubing. Good formability and corrosion resistance are its hallmark.
- Ti Grade 5 (6AL-4V) is an alloyed titanium product containing 6% Aluminum and 4% Vanadium; is a medium strength product. This titanium grade is predominantly used in airframe and turbine engine parts; and for use in surgical implants.
- Titanium 6AL – 4V ELI is an alloyed titanium product containing 6% Aluminum and 4% Vanadium, ELI (Extra Low Interstitial).
- 6AL–2Sn–4Zr–2Mo (6-2-4-2)is an alloyed titanium product containing 6% 铝, 2% Tin, 4% 锆, 2% Molybdenum.
- 6AL–6V–2Sn (6-6-2)is an alloyed titanium product containing 6% 铝, 6% Vanadium, 2% Tin.
- 5AL–2.5Sn & ELI (5-2.5)is an alloyed titanium product containing 5% Aluminum and 2.5% Tin. Also ELI (Extra Low Interstitial).
- 8AL–1V–1Mo (8-1-1)is an alloyed titanium product containing 8% 铝, 1% Molybdenum and 1% Vanadium.
Different forms of titanium bar, rod
Application of titanium bar, rod
Titanium alloy bars, especially Ti-6AL-4V alloy bars, titanium connecting rods are used in automobile engines, which are not only wear-resistant but also light in weight, reducing the weight of automobiles
随后, titanium was used in titanium spring seats, silencers, and exhaust gas tanks. 答案是肯定的, titanium rods are used as stirring rods and fasteners in the chemical industry because of their corrosion resistance and wear resistance
另外, the superior performance of titanium has also attracted the attention of the medical profession, contributing to the development of medicine and human health.
- Electric power, Energy, and Seawater desalination
- Chemical Plants and electrolysis
- PHE, Aircraft and Jet Engines
- Automobiles, consumer appliances, sports, and medical care
- Civil Engineering and architectural materials
Common titanium and zirconium bar applications include:
- Fabrication to produce fasteners, flanges, and other heavy-duty machine components
- Dental implant studs and medical screws
- Consumer products including jewelry and tools
Shafts and impellers for mixing equipment
What are the available surface finish options for the titanium bar?
- 黑
- Bright Polished
- Rough Turned
- Matt Finish
Product quality control
- ▲ Chemical analysis – to define element contents such as C, N, O, H, 铁, 铝, V.
- ▲ Mechanical properties – tension test including tensile, yield, elongation, reduction of area
- ▲ Dimensional tolerance – diameter and length tolerance check
- ▲ Surface contamination – imperfections removed
- ▲ Nondestructive test – 100% NDT for inspecting inner cracks, pores, and other defections
Physical Properties:
年级 | Status | 抗张强度 | 屈服强度 | 伸长 | Area of Reduction | ||
克西 | 马帕 | 克西 | 马帕 | % | |||
GR1型 |
退火
|
35 | 20 | 25 | 170 | 24 | 30 |
GR2型 | 50 | 345 | 40 | 275 | 20 | 30 | |
GR3 | 65 | 450 | 55 | 380 | 18 | 30 | |
GR4 | 80 | 550 | 70 | 483 | 15 | 25 | |
TI-6AL-4VELI | 125 | 860 | 115 | 795 | 10 | 25 | |
Ti6AL7Nb | 130.5 | 900 | 116.8 | 800 | 10 | 25 | |
Ti13Nb13Zr | ageing125Solid 800
Not annealed 800
|
860
550
550 |
105500
500 |
725345
345 |
815
8 |
1530
15 |
Chemical Requirements of Titanium Rod
N | C | H | 铁 | O | 铝 | V | 帕 | 莫 | 镍 | 钛 | |
Gr. 1 | 0.03 | 0.08 | 0.015 | 0.2 | 0.18 | / | / | / | / | / | Remaining |
Gr. 2 | 0.03 | 0.08 | 0.015 | 0.3 | 0.25 | / | / | / | / | / | Remaining |
Gr. 3 | 0.05 | 0.08 | 0.015 | 0.3 | 0.35 | / | / | / | / | / | Remaining |
Gr. 4 | 0.05 | 0.08 | 0.015 | 0.5 | 0.4 | / | / | / | / | / | Remaining |
Gr. 5 | 0.05 | 0.08 | 0.015 | 0.4 | 0.2 | 5.5~6.75 | 3.5~4.5 | / | / | / | Remaining |
Gr. 7 | 0.03 | 0.08 | 0.015 | 0.3 | 0.25 | / | / | 0.12~0.25 | / | / | Remaining |
Gr. 9 | 0.03 | 0.08 | 0.015 | 0.25 | 0.15 | 2.5~3.5 | 2.0~3.0 | / | / | / | Remaining |
Gr.12 | 0.03 | 0.08 | 0.015 | 0.3 | 0.25 | / | / | / | 0.2~0.4 | 0.6~0.9 | Remaining |
Considerations when buying titanium bar, rod
- Finished products are smooth, have no peeling, no cracks, small tolerance
- superior performance, 高强度, high-temperature resistance
- fine length, high hardness, no cracks
- stable material performance, quality assurance
- no oil, scratches, knocks on the surface
- side cutting surface is flat and smooth
Our Additional Services
Grand Titanium offers a complete range of services, starting from basic cutting and processing to more complex and bespoke solutions. This range includes:
- Plasma Cutting
- GAS Cutting
- Laser Cutting
- Waterjet Cutting
- Shear Cutting
- 弯曲, Machining & Fabrication
- Polishing
Why Choose Titanium bar, rod from us?
Grand Titanium is a global professional titanium bar, rod manufacturers, and supplier in China, all our products are manufactured in accordance with ASTM, AMS, and ISO international standards. and we make it easy for you to find the product you need with quick shipments!
- Quality Advantage
Located in Changzhou,江苏, Grand has been supplying metallic products for 17 年. Material ration in line with international standards.
- Equipment Advantages
Complete supporting equipment, the introduction of the industry’s top roller drawing equipment, inspection and testing equipment to ensure production output and quality stability.
- Price Advantages
Source factory production, direct sales in reasonable price
相关产品
-
阅读更多预览
黄铜板
基于电解铜的黄铜板, 以锌和微量元素为原料, 通过铸锭加工, 热轧, 冷轧, 热处理, 表面清洁, 切削, 整理, 然后包装. 材料工艺性能, 可塑性, 机械性能, 耐腐蚀性, 性能和良好的锡.
它已广泛应用于电气领域, 汽车, 通信, 硬件, 装饰等行业.
-
阅读更多预览
黄铜线圈
黄铜线圈具有优异的可塑性 (黄铜最佳) 和高强度, 良好的机械加工性, 易于焊接, 对一般腐蚀非常稳定, 但易腐蚀开裂; 黄铜线圈是铜,锌的合金因其黄色而得名.
黄铜线圈的机械性能和耐磨性非常好, 可用于制造精密仪器, 船舶零件, 炮弹, 等. 黄铜敲击,听起来不错, 所以钹等乐器, 钹, 钟声, 数字由黄铜制成. 根据化学成分, 黄铜分为普通铜和特种黄铜.
-
阅读更多预览
铝带
铝板 & 具有厚度的卷状箔 > 0.2毫米, 宽度20mm至100mm通常称为铝带. 以小宽度生产的铝带的通用名称通常是分割带. 铝板被切割成所需的分切工具, 铝带的原料是纯铝或铝合金热轧铸轧铝卷和热轧卷. 通过冷轧机形成不同厚度和宽度的轧制板和铝卷, 然后立式切割分切机对不同宽度的带材. 厚度<0.2毫米, 我们称之为铝箔带或铝箔卷.
-
阅读更多预览
铜箔
铜是一种红棕色金属元素,具有良好的延展性等突出特性, 延性, 导热和导热率
纯铜是一种非常柔软且具有延展性的金属,以达到所需的性能, 我们可以与其他金属合金 黄铜和青铜是广泛使用的铜合金
铜箔是由铜或铜合金经热轧和冷轧制成的,铜箔的厚度范围从0.03mm到0.2mm, 宽度和长度可根据客户要求定制
-
阅读更多预览
铜带
铜带具有高导电性和导热性, 这就是为什么铜带是变压器绕组的最佳选择.
并且, 铜带比其他金属带更有效地传递热量.
铜带更具延展性,抗拉强度高. 耐腐蚀性, 高度稳定性, 铜带的散热优于其他金属.
铜带主要用于电气和电子行业,因为铜是非磁性和无火花的. 铜带多用于换热器, 变压器绕组, 冷凝 器, 和避雷针.
铜带厚度范围从0.03毫米到3.0毫米. 铜带可以根据客户的要求制造不同的宽度和厚度.
如有任何问题, 请随时联系 sales@grandsteeltube.com
-
阅读更多预览
铜板
铜板是一种非常可行和延展的金属形式, 导电性和导热性高, 并提供出色的耐腐蚀性. 一种美丽而多功能的金属, 铜已被利用了数千年. 历史, 它是制作工具的最爱选择, 船只, 和雕塑. 铜也以其美丽的铜绿而闻名. 暴露时, 启封, 到室外环境, 铜开始氧化. 这种曝光以铜绿的形式产生美丽的颜色变化. 铜绿的颜色会随着时间的推移而改变和发展特性,同时保护金属免受劣化. 人们还将使用化学混合物快速产生铜绿,从而加快该过程,并在没有户外暴露的情况下形成铜绿. 铜板也可以锤击, 工具化, 或压花以增加质感和装饰或功能吸引力,并有多种厚度,从非常薄的铜箔到厚铜板. 它还有许多合金,将其他金属与铜混合. 在 Grand Copper, 我们卖 纯铜 -C110系列 (可根据要求提供其他合金和回火). 这种高纯度为各种行业和用途中的项目和应用提供了所需的优质品质. 我们以提供最好的材料而自豪. 我们的高品质, 价格实惠,友好, 十多年来,一流的客户服务使我们成为行业的领导者.
-
阅读更多预览
铝箔
铝箔 是在厚度小于0.2mm的薄金属叶片中制备的铝 (7.9 密尔斯); 厚度更薄至 4 千分尺也是常用的. 标准家用箔通常是 0.016 毫米 (0.63 密尔斯) 厚, 重型家用箔通常是 0.024 毫米 (0.94 密尔斯). 并且空调箔可以薄于0.0047mm, 和一些比0.002mm薄的食物箔. 箔片柔韧,可以很容易地弯曲或缠绕在物体上. 薄箔易碎,有时会与其他材料(如塑料或纸张)层压,以使其更坚固、更有用. 它在工业上用于各种目的, 包括包装, 绝缘和运输. 在家, 人们使用铝箔储存食物, 覆盖烘焙表面和包裹食物, 如肉类, 防止它们在烹饪时失去水分.
-
阅读更多预览
铝卷
铝卷 是轧制产品, 以连续带材的卷绕形式生产, 并具有内径和外径. 内径从50毫米到1000毫米. 铝合金牌号,包括1xxx, 2三十, 3三十, 4三十, 5三十, 6三十, 7三十, 8三十. 但最常见的是 1050, 3003, 6061 和 5251 铝卷. 厚度从0.045-80mm, 宽度从60-2650mm. 铝卷的常见宽度为800mm,1000毫米, 1250毫米,1450毫米和1500毫米.
多个行业依靠铝卷进行各种应用, 如汽车, 建设, 传热, 药, 电气, 和食品工业. 与其他材料相比, 在许多情况下,铝是一种优越得多的材料. 铝卷可提供标准轧机表面处理, 或者可以刷, 有方格的, 彩色涂层, 缎面打磨和阳极氧化. 铝板或铝箔可根据客户要求切割成线圈.
-
阅读更多预览
钛板
钛板具有高耐腐蚀性和比强度, 并广泛应用于电力, 化工, 航空零件, 建材, 运动器材, 医疗等领域,并且仍在不断扩大. 从使用和制造技术的角度来看, 钛板价格低廉, 高性能, 多种功能, 易于生产.
如有任何问题,请随时联系 sales@grandsteeltube.com
-
阅读更多预览
不锈钢棒
不锈钢原料棒通常用于生产线机械或其他需要耐用性的工业环境. 不锈钢圆棒类型可以找到许多不同的形状,例如六角形, 广场, 或圆钢. 不锈钢棒料是一种无腐蚀性材料, 耐腐蚀, 经久耐用. 可用于汽车等多种行业, 航空 航天, 建设, 和制造.
不锈钢棒料是业内质量最高的不锈钢类型. 它们采用优质材料制成,使其耐腐蚀和其他环境条件. 不锈钢棒料还具有比其他类型的不锈钢更高的抗拉强度.
不锈钢圆杆产品或圆棒通常用于制造汽车轮辋等产品, 摩托车轮辋, 自行车轮辋, 等等. 这些类型的棒材通常是通过将不锈钢板卷成长管,然后在末端将它们焊接在一起以形成可以切割成更小块的圆棒或圆棒