Powder Coated Aluminum Tube
Aluminum Round Tubes are available in alloys 6061, 6063,6082, Aluminum 6061 is the most widely used alloy, offering better corrosion resistance and weldability than other Aluminum Tube, but less strength. Alloy 6063 offers high corrosion resistance and is commonly used for outdoor structural applications such as Aluminum Tube railings and trims.
Ef einhverjar spurningar,vinsamlegast hafðu samband sales@grandsteeltube.com
- Lýsing
- Efnasamsetning:
- Upplýsingar
- Fyrirspurn
Aluminum tube.
It is a kind of high-strength hard aluminum, which can be heat-treated and strengthened. It has medium plasticity in annealing, quenching and hot state. It has good spot weldability. The aluminum tube has the tendency to form intergranular cracks when using gas welding and argon arc welding. After quenching and cold work hardening, the machinability is good and it is not good in the annealed state. The corrosion resistance is not high, and the anodizing treatment and painting method or the surface is coated with an aluminum layer to improve the corrosion resistance. It can also be used as a mold material.
Aluminum tube advantages:
1 – the advantages of welding technology: thin-walled copper-aluminum tube welding technology suitable for industrial production, known as the world-class problem, is the key technology for the aluminum-based copper of the air-conditioner connecting tube.
2 – the service life advantage: from the inner wall of the aluminum tube, since the refrigerant does not contain moisture, the inner wall of the copper-aluminum connecting tube does not corrode.
3 – the energy-saving advantage: the connecting line between the indoor unit and the outdoor unit of the air conditioner, the lower the heat transfer efficiency, the more energy-saving, or the better the heat insulation effect, the more power-saving.
4 – excellent bending performance, easy to install, transfer machine
Surface finish editing.
1 – Chemical treatment: oxidation, electrophoretic coating, fluorocarbon coating, powder coating, wood grain transfer
2 – Mechanical treatment: mechanical drawing, mechanical polishing, sand blasting
Ef einhverjar spurningar,Þér er meira en velkomið að hafa samband sales@grandsteeltube.com
Efnasamsetning:
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Zr | Impurity | Al |
| 2014 | 0.5-1.2 | 0.7 | 3.9-5.0 | 0.4-1.2 | 0.2-0.8 | 0.1 | 0.25 | 0.15 | - | 0.15 | Rest |
| 2017 | 0.2-0.8 | 0.7 | 3.5-4.5 | 0.4-1.0 | 0.4-0.8 | 0.1 | 0.25 | 0.15 | - | 0.15 | Rest |
| 2024 | 0.5 | 0.5 | 3.8-4.9 | 0.3-0.9 | 1.2-1.8 | 0.1 | 0.25 | 0.15 | - | 0.15 | Rest |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | 0.1 | - | - | 0.15 | Rest |
| 5056 | 0.3 | 0.4 | 0.1 |
0.05-0.20 |
4.5-5.6 | 0.05-0.20 | 0.1 | - | - | 0.15 | Rest |
| 5083 | 0.4 | 0.4 | 0.1 | 0.40-1.0 | 4.0-4.9 | 0.05-0.25 | 0.25 | 0.15 | - | 0.15 | Rest |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | 0.2 | 0.15 | - | 0.15 | Rest |
| 6061 | 0.4-0.8 | 0.70 | 0.15-0.40 | 0.15 | 0.8-1.2 | 0.04-0.35 | 0.25 | 0.15 | - | 0.15 | Rest |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45-0.9 | 0.1 | 0.1 | 0.1 | - | 0.15 | Rest |
| 6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | 0.2 | 0.1 | - | 0.15 | Rest |
| 7050 | 0.12 | 0.15 | 2.0-2.6 | 0.1 | 1.9-2.6 | 0.04 | 5.7-6.7 | 0.06 | 0.08-0.15 | 0.15 | Rest |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | 5.1-6.1 | 0.2 | - | 0.15 | Rest |
Ef einhverjar spurningar,Vinsamlegast ekki hika við að hafa samband sales@grandsteeltube.com
| tem | Aluminium pipe/pipes Aluminium Tube/Tubes/tubing |
| Efni | Ál |
|
Einkunn |
1000 series: 1050,1060,1070,1080,1100,1435, etc2000 series: 2011,2014,2017,2024, o.s.frv
3000 series: 3002,3003,3104,3204,3030, o.s.frv 5000 series: 5005,5025,5040,5056,5083, o.s.frv 6000 series: 6101,6003,6061,6063,6020,6201,6262,6082, o.s.frv 7000 series: 7003,7005,7050,7075, o.s.frv |
| standards | ASTM, ASME,EN, JIS, DIN,GB/T etc |
| Stærð | Outer Diameter:1-250Mm |
| Þykkt veggja: 0.15-50Mm | |
| Lengd: 10mm -6000mm | |
|
Surface treatment |
Mill finishAnodized
Electrophoresis Powder coating Wooden grain Sand blast |
| Surface colors | Nature, silver, bronze, champagne, black, gloden, etcAs customized |
| Temper | T3-T8 |
|
Moulding/Pattern
|
|
|
Umsókn
|
1. Lighting,solar reflector plate.2.architectural appearance, interior decoration:ceiling,metope,
furniture,cabinets and so on. 3.elevator,nameplate, bags. 4.automotive interior and exterior decoration. 5. Interior decoration: such as photo frame. 6.household appliances, refrigerator, microwave oven, audio equipment. 7. Aerospace and military aspects. 8, machinery parts processing, mold manufacturing . 9. chemical/insulation pipeline coating. |
Ef einhverjar spurningar,Þér er meira en velkomið að hafa samband sales@grandsteeltube.com
Tengdar vörur
-
Lestu meiraFljótlegt útsýniAluminum Precision Tube
Aluminum tubes have high weather resistance anti scratch anticorrosion and good weather resistance subtle edges and elegant appearance and easy processing and installation high brightness and hardness. So it is widely used in aluminum window, door, curtain wall, hand railing, normal aluminum profile, decorative and industrial aluminum profile etc.
Ef einhverjar spurningar,vinsamlegast hafðu sambandsales@grandsteeltube.com
-
Lestu meiraFljótlegt útsýniCoiled aluminum tube
Forrit :
Coiled aluminum tube are especially suited to long production runs for industrial applications. Mainly be used on air-conditioner, freezer, kælingu, Condenser, intercooler, evaporator, warm wind movement, air conditioner pipeline, car radiator etc.
Aluminum tube in coil is widely used for refrigeration and air condition industry. Like evaporator,air conditioner,condenser,heat exchanger,freezer,oven gas,boiler and so on.
Ef einhverjar spurningar,vinsamlegast hafðu samband sales@grandsteeltube.com
-
Lestu meiraFljótlegt útsýni6061 Aluminum Tube
Aluminum 6061-T6 is a sub-category of the 6061 alloy, one of the most widely used aluminium alloys..
The 6061-T6 alloy is used in applications where high strength to low weight ratios are critical such as the aircraft and aerospace industries.
It is the way the base Aluminium 6061 is treated that give Aluminium 6061-T6 it particular characteristics.
Compared to other Aluminium 6061 variations, 6061-T6 has better machinability characteristics, an improved anodizing response and comparable corrosion resistance properties
Ef einhverjar spurningar,vinsamlegast hafðu samband sales@grandsteeltube.com
-
Lestu meiraFljótlegt útsýniThick Wall Seamless Aluminium Tubes
High weather resistance anti scratch anticorrosion and good weather resistance subtle edges and elegant appearance and easy processing and installation high brightness and hardness. So it is widely used in aluminum window, door, curtain wall, hand railing, normal aluminum profile, decorative and industrial aluminum profile etc.
Ef einhverjar spurningar,vinsamlegast hafðu samband sales@grandsteeltube.com
-
Lestu meiraFljótlegt útsýniRed anodized aluminum tube
High weather resistance anti scratch anticorrosion and good weather resistance subtle edges and elegant appearance and easy processing and installation high brightness and hardness. So it is widely used in aluminum window, door, curtain wall, hand railing, normal aluminum profile, decorative and industrial aluminum profile etc.
Ef einhverjar spurningar,vinsamlegast hafðu samband sales@grandsteeltube.com
-
Lestu meiraFljótlegt útsýniGold anodized aluminum tubes
High weather resistance anti scratch anticorrosion and good weather resistance subtle edges and elegant appearance and easy processing and installation high brightness and hardness. So it is widely used in aluminum window, door, curtain wall, hand railing, normal aluminum profile, decorative and industrial aluminum profile etc.
-
Lestu meiraFljótlegt útsýniAir Cylinder Tubing
The common alloy No. of air cylinder tubing is 6063 og 6061. They are both great in formability, weldability, and corrosion resistance together with excellent appearance.
Grand also capable of extruding other alloys no. for air cylinder tubing, for example, 7000 series, 5000 series, 3000 series, 2000 series, og 1000 series, consult our expert engineers to get more info regarding this extraordinary aluminum alloy no.
-
Lestu meiraFljótlegt útsýniExtruded Aluminum Tube
What I’m sure of is that at some point in time, you ought to have seen or come across this particular material, whether knowingly or unknowingly.
Well, an extruded aluminum tube primarily refers to the type of aluminum profile made from extrusion process to produce desired sectional shape and size.
In other simple words, it refers to an aluminum tube formed by forcing it to flow through a tube-shaped opening die.
And at the end of the process, it emerges as an elongated piece with a similar profile as the die opening.
In many instances, you’ll find that many manufacturers tend to produce different types of extruded aluminum tubes.
Of course, the essence, in this case, is for making sure that they are suitable for each application.
But we shall look at this aspect later in on in this guide, so do not worry!
In the meantime, let’s find out some of the major properties that make extruded aluminum tube one of the best material for different applications.
-
Lestu meiraFljótlegt útsýniBlue anodized aluminum tube
High weather resistance anti scratch anticorrosion and good weather resistance subtle edges and elegant appearance and easy processing and installation high brightness and hardness. So it is widely used in aluminum window, door, curtain wall, hand railing, normal aluminum profile, decorative and industrial aluminum profile etc.
-
Lestu meiraFljótlegt útsýniAnodized Aluminum Tube
High weather resistance anti scratch anticorrosion and good weather resistance subtle edges and elegant appearance and easy processing and installation high brightness and hardness. So it is widely used in aluminum window, door, curtain wall, hand railing, normal aluminum profile, decorative and industrial aluminum profile etc.