-
Lestu meiraFljótlegt útsýni
A513 DOM stál rör
ASTM A513 staðall fyrir kolefni og ál rafmagnsviðnám soðið (ERW) Slöngur til vélrænna nota. Það er hægt að flokka Type1 (Hot Vals rafmagns viðnám lengdina), Gerð 2 (kalt vals) og Tegund 5(Teiknað yfir Mandrel) samkvæmt meðferðarvinnslu þess. The dregin yfir Mandrel (DOM) Slöngur hafa framúrskarandi einbeitingu, slétt ytri og innri veggþykkt en ERW vörur þess, oft notað í bílum, tæki og byggingariðnaður.
-
Lestu meiraFljótlegt útsýni
EN10305-5 Welded Rectangular Tube
-
Lestu meiraFljótlegt útsýni
EN10305-5 Welded Square Tube
The European norm EN 10305-5 specifies the requirements for unalloyed carbon steel welded square and rectangular tubes for precision systems. These tubes are intended for use in the construction of greenhouses, scaffolding and fences and have different specific dimensional tolerances.
-
Lestu meiraFljótlegt útsýni
Black Phosphate Precision Tube
Helstu eiginleikar: mikil nákvæmni, framúrskarandi birta, engin oxun á ytri og innri veggjum eftir hitameðferð, mikil hreinsun innan veggjar. Stálrörið þolir háan þrýsting. Engin aflögun eftir kalda beygju, engin sprunga eftir brennslu og fletjun . Flókin rúmfræðileg myndun og vinnsla er hægt að átta sig á. bright black. Color is homogeneously distributed on the tube surface. The tube has good property of antirust.
Aðalumsókn: Til notkunar í vökvakerfum, bifreið og í tilefni þess að mikil nákvæmni, birta, Krafist er hreinleika rörsins og aflrænna eiginleika þess.Ef einhverjar spurningar, vinsamlegast hafðu samband sales@grandsteeltube.com
-
Lestu meiraFljótlegt útsýni
Air Cylinder’s Steel Tube
Yfirlit yfir ferli leiðar: quality carbon steel → cold rolling→ bright heat treatment without oxidization (NBK staða) → prófun án eyðileggingar. Í vegg honing og inni skola undir háum þrýstingi→. Ryðvarnarolía utan yfirborðs→ plasthetta á báðum endum.
Helstu eiginleikar: mikil nákvæmni, framúrskarandi birta, engin oxun á ytri og innri veggjum eftir hitameðferð, mikil hreinsun innan veggjar. Stálrörið þolir háan þrýsting. Engin aflögun eftir kalda beygju, engin sprunga eftir brennslu og fletjun . Flókin rúmfræðileg myndun og vinnsla er hægt að átta sig á. Litur túpunnar: grátt með hvítu.
Aðalumsókn: Til notkunar í vökvakerfum, bifreið og í tilefni þess að mikil nákvæmni, birta, Krafist er hreinleika rörsins og aflrænna eiginleika þess.Ef einhverjar spurningar,vinsamlegast hafðu samband sales@grandsteeltube.com
-
Lestu meiraFljótlegt útsýni
Hvít galvaniseruð stálrör
Við framleiðslu galvaniseruðu stálröra, við notum háþróaða tæknilega vinnslu og notum efna vökva flutt inn frá Þýskalandi. Bæði innra og ytra yfirborð stálröranna með mikilli nákvæmni er hægt að galvanisera, sem gefur þeim mikla einsleitni og framúrskarandi ryðþolinn árangur.
Þykkt sinkveggja 8-12um, og sérsniðin samkvæmt kröfum viðskiptavina. Saltúðaprófun: Sameiginlegar kröfur- 80-120 Klukkustundir, Miklar kröfur- 120-300 klukkustundir Cr+6 ókeypis, Tegund umhverfisLýsing á ferlinu
Nota mikla nákvæmni, fínteiknað bjart, óaðfinnanlegt stálrör sem stálrör til galvanhúðunar, ytri veggur stálrörsins er kaldgalvaniseraður, og báðir endar eru þaktir rykvörnum.
Ef einhverjar spurningar,vinsamlegast hafðu samband sales@grandsteeltube.com
-
Lestu meiraFljótlegt útsýni
Yellow Galvanized Steel Tube
1. We use high quality raw materials. Allt hráefni er fengið frá alþjóðlega þekktum stálframleiðendum.
2. Hver framleiðslulota hráefnis er könnuð bæði með tilliti til efnafræðilegra og aflfræðilegra eiginleika., samkvæmt forskriftum.
3. Meðan á kalddrætti stendur, skoðunarmenn okkar athuga hvert búnt þrisvar sinnum: einu sinni í upphafi ferlisins, einu sinni í miðjunni, og að lokum, í lok kalddráttarferlisins.
4. Meðan á lokahitameðferð stendur, hvert knippi hefur yfirborðið athugað, sem og vélræna eiginleika með sýnatöku.
5. Prófun án eyðileggingar og handvirk skoðun fyrir hvert rör tryggir að 100% Gæðahlutfall fyrir galvaníseringuEf einhverjar spurningar,vinsamlegast hafðu samband sales@grandsteeltube.com
-
Lestu meiraFljótlegt útsýni
Ólífugræn galvaniseruðu stálrör
1. Við notum hágæða hráefni fyrir ólífugræna galvaniseruðu stálrörið. Allt hráefni er fengið frá alþjóðlega þekktum stálframleiðendum.
2. Hver framleiðslulota hráefnis er könnuð bæði með tilliti til efnafræðilegra og aflfræðilegra eiginleika., samkvæmt forskriftum.
3. Meðan á kalddrætti stendur, skoðunarmenn okkar athuga hvert búnt þrisvar sinnum: einu sinni í upphafi ferlisins, einu sinni í miðjunni, og að lokum, í lok kalddráttarferlisins.
4. Meðan á lokahitameðferð stendur, hvert knippi hefur yfirborðið athugað, sem og vélræna eiginleika með sýnatöku.
5. Prófun án eyðileggingar og handvirk skoðun fyrir hvert rör tryggir að 100% Gæðahlutfall fyrir galvaníseringuEf einhverjar spurningar,vinsamlegast hafðu samband sales@grandsteeltube.com
-
Lestu meiraFljótlegt útsýni
EN10305-3 Welded Precision Steel Tube
EN10305-3 Welded cold sized tubes
The tubes shall be manufactured from steel strip by electric welding. The tubes shall not included welds used for joining of flat rolled strip prior to forming the tube, except for coiled tubes which may be supplied in the delivery conditions +A and +N
Possible surface conditions are :
S1 black
S2 pickled
S3 cold rolled
S4 coated to an agreed condition
Note: The surface conditions S1 and S3 apply for the strip. The surface condition S2 and S4 may apply for the strip or the tube; the purchaser should, where necessary, indicate the condition at the time of enquiry and order.
Tubes made of the steel grade E155 E195 E235 and E355 shall be supplied in the delivery condition +CR1 or +N. Tubes made of the grades E190 E220 E260 E320 E370 and E420 shall be supplied in the delivery conditions +CR2
-
Lestu meiraFljótlegt útsýni
EN10305-2 Welded & Redrawn Steel Tube
- Precision in combination with a high quality surface finish are the features that characterise our fine tolerance steel tubing
- ERW feedstock tubes are manufactured from specially prepared pickled, oiled and cold or hot rolled steel coil.
- Resistance-pressure-welding Therefore, the weld is created from the base material without any filler material
- The removal of the excess material, both internally and externally, is a key element in the manufacturing process and this is an in-house skill.
- The cold drawing process occurs after annealing and raises the quality of the feedstock tube to vastly superior levels of tolerance, surface finish and final material mechanical properties.
- In some instances the final finished product specification can be further fine tuned by further annealing. This is of particular interest in relation to products that are specifically manufactured to unique customer specifications.
-
Lestu meiraFljótlegt útsýni
Shock Absorber Steel Tube
Shock absorber precision steel tubes are suspension components that are responsible for absorbing the impact of avehicle’s movements. Through the shocks, the vehicle’s bounce cycle is cut short. If the car encounters abump on the road, it will still bounce; hins vegar, the shocks will shorten its bounce so that the driver and passengers will hardly feel it.
Ef einhverjar spurningar,vinsamlegast hafðu samband sales@grandsteeltube.com
-
Lestu meiraFljótlegt útsýni
EN10305-3 Plastic Coating Welded Carbon Steel Tube
The tubes shall be manufactured from steel strip by electric welding. The tubes shall not included welds used for joining of flat rolled strip prior to forming the tube.
Possible surface conditions are :White plastic coating,Black plastic coating,Green plastic coating etc Other coating can be achieved after discussion.
OD:18mm to 60mm WT:1.00mm to 3.00mm Length:6000mm to 12000mm
Umsókn:Used for the greenhouse cultivation,other construction purposes.
-
Lestu meiraFljótlegt útsýni
EN10305-3 welded precision tube for automotive industry
The tubes shall be manufactured from steel strip by electric welding. The tubes shall not included welds used for joining of flat rolled strip prior to forming the tube, except for coiled tubes which may be supplied in the delivery conditions +A and +N
Possible surface conditions are :
S1 black S2 pickled S3 cold rolled S4 coated to an agreed condition
Note: The surface conditions S1 and S3 apply for the strip. The surface condition S2 and S4 may apply for the strip or the tube; the purchaser should, where necessary, indicate the condition at the time of enquiry and order.
Tubes made of the steel grade E155 E195 E235 and E355 shall be supplied in the delivery condition +CR1 or +N. Tubes made of the grades E190 E220 E260 E320 E370 and E420 shall be supplied in the delivery conditions +CR2
-
Lestu meiraFljótlegt útsýni
EN10305-3 Low Carbon Steel Tube
Steel GradeEfnasamsetningSymbolMaterial NumberCMax.SiMax.MnMax.PMax.SMax.E1551.00330.110.350.700.0250.025E1951.00340.150.350.700.0250.025E2351.03080.170.351.200.0250.025E2751.02250.210.351.400.0250.025E3551.05800.220.551.600.0250.025Steel Grade+C+LC+SRNameNo.RmMpaA%RmMpaA%RmMpaReHMpaA%E1551.003340063501035024518E1951.003442063701037028018E2351.030849064401044032514E2751.02255605510851037512E3551.05806404590659043510Steel Grade+A+NNameNo.RmMpaA%RmMpaReHMpaA%E1551.003326028270–41015528E1951.003429028300–44019528E2351.030831525340–48023525E2751.022539021410–55027521E3551.058045022490–63035522 -
Lestu meiraFljótlegt útsýni
EN10305-2 Welded Steel Tube
EN10305-2 Welded Cold Drawn Steel Tube for Precision Applications
1. Size Range: OD: 6-89Mm, WT: 1-3Mm, Lengd: 5.8m/6m, maximal 11.8m
2. Stable Quality with Comeptitive Price
3. NBK(Bright Annealing) Heat Treatment, Surface is clean and smooth, without oxide scale
4. Good Extending and Bending Ability
5.Surface Treatment can be:Black Phosphated,Zn-coated,o.s.frv