Stainless Steel Strip is an austenitic chromium-nickel-manganese stainless steel that offers electromagnetic properties like electrical resistivity, magnetic permeability & electrical conductivity and Young’s Modulus of Elasticity. We offer these stainless steel strips in various material grades such as Stainless Steel 304 Strips, Ryðfrítt stál 310 Strips, Ryðfrítt stál 316 Strips, Ryðfrítt stál 904 Strips and many more.
Brass Sheet
Brass Sheet based on electrolytic copper, zinc and trace elements as its raw material, through processing by ingot, hot rolling, cold rolling, heat treatment, surface cleaning, cutting, finishing, and then packing. Material processes performance, plasticity, Aflfræðilegir eiginleikar, tæringarþol, performance and good tin.
It has been widely used in electrical, Bifreiða, communications, hardware, decoration and other industries.
- Lýsing
- Upplýsingar
- Fyrirspurn
Product Introduction
Brass Sheet based on electrolytic copper, zinc and trace elements as its raw material, through processing by ingot, hot rolling,
cold rolling, heat treatment, surface cleaning, cutting, finishing, and then packing. Material processes performance, plasticity,
Aflfræðilegir eiginleikar, tæringarþol, performance and good tin.
It has been widely used in electrical, Bifreiða, communications, hardware, decoration and other industries.
Main Technical Parameters
2-1Efnasamsetning
Name |
Alloy No. |
Efnasamsetning (%, Max.) |
||||||||
Cu |
Fe |
Pb |
Al |
Mn |
Sn |
Ni |
Zn |
Impurity |
||
Brass |
H96 |
95.0-97.0 |
0.10 |
0.03 |
— |
— |
— |
0.5 |
Rem |
0.3 |
H90 |
88.0-91.0 |
0.10 |
0.03 |
— |
— |
— |
0.5 |
Rem |
0.3 |
|
H85 |
84.0-86.0 |
0.10 |
0.03 |
— |
— |
— |
0.5 |
Rem |
0.3 |
|
H70 |
68.5-71.5 |
0.10 |
0.03 |
— |
— |
— |
0.5 |
Rem |
0.3 |
|
H68 |
67.0-70.0 |
0.10 |
0.03 |
— |
— |
— |
0.5 |
Rem |
0.3 |
|
H65 |
63.5-68.0 |
0.10 |
0.03 |
— |
— |
— |
0.5 |
Rem |
0.3 |
|
H63 |
62.0-65.0 |
0.15 |
0.08 |
— |
— |
— |
0.5 |
Rem |
0.5 |
|
H62 |
60.5-63.5 |
0.15 |
0.08 |
— |
— |
— |
0.5 |
Rem |
0.5 |
2-2 Alloy Table
Name |
Kína |
ISO |
ASTM |
JIS |
Brass |
H96 |
CuZn5 |
C21000 |
C2100 |
H90 |
CuZn10 |
C22000 |
C2200 |
|
H85 |
CuZn15 |
C23000 |
C2300 |
|
H70 |
CuZn30 |
C26000 |
C2600 |
|
H68 |
— |
— |
— |
|
H65 |
CuZn35 |
C27000 |
C2700 |
|
H63 |
CuZn37 |
C27200 |
C2720 |
|
H62 |
CuZn40 |
C28000 |
C2800 |
2-3 Lögun
2-3-1 Specification Unit:Mm
Name |
Alloy No.(Kína) |
Temper |
Stærð(Mm) |
||
Thickness |
Width |
Lengd |
|||
Brass |
H59 H62 H63 H65 H68 H70 |
R |
4~8 |
600~1000 |
≤3000 |
H62 H65 H68 |
Y Y2 |
0.2~0.49 |
600 |
1000~2000 |
|
0.5~3.0 |
600~1000 |
1000~3000 |
Temper Mark:O. Soft;1/4H. 1/4 Hard;1/2H. 1/2 Hard;H. Hard;EH. Ultrahard;R. Hot Rolled.
2-3-2 Tolerance Unit: Mm
Thickness |
Width |
|||||
Thickness Allow Deviation ± |
Width Allow Deviation ± |
|||||
<400 |
<600 |
<1000 |
<400 |
<600 |
<1000 |
|
0.5~0.8 |
0.035 |
0.050 |
0.080 |
0.3 |
0.3 |
1.5 |
0.8~1.2 |
0.040 |
0.060 |
0.090 |
0.3 |
0.5 |
1.5 |
1.2~2.0 |
0.050 |
0.080 |
0.100 |
0.3 |
0.5 |
2.5 |
2.0~3.2 |
0.060 |
0.100 |
0.120 |
0.5 |
0.5 |
2.5 |
Temper |
Togþol N/mm2 |
Lenging ≥% |
Harka HV |
|
M |
(O) |
≥290 |
35 |
— |
Y4 |
(1/4H) |
325-410 |
30 |
75-125 |
Y2 |
(1/2H) |
340-470 |
20 |
85-145 |
Y |
(H) |
390-630 |
10 |
105-175 |
T |
(EH) |
≥490 |
2.5 |
≥145 |
R |
— |
— |
— |
Temper Mark:M. Soft;Y4. 1/4 Hard;Y2. Hard;Y. Hard;T. Ultra hard
Item Name | Brass Sheet/Brass Plate |
Einkunn | C21000, C22000, C23000, C24000, C26000, C26800, C27000, 27200, C34000, C34200, C28000, C35000, C36000, C37700, C38500, C38000, C68700, o.s.frv |
Staðall | GB, ASTM, UNS, SAE, DIN, SUS, JIS |
Thickness | 0.20mm-5.00mm, or required |
Width | 10.00--1200.00 |
Lengd | As required |
Finish | 2B, BA, No.4, 8K, Hairline, Embossed, Etched, Vibration, PVD color coated, Titanium, Sand Blasted, Anti-fingerprin. |
Litur | Golden, Svartur, Sapphire Blue, Brown, Rose gold, Bronze, Purple, Gray, Silver, Champagne, Violet, Blue Diamond |
Umsókn | Interior, Exterior, Architectural, Bathroom Decoration, Elevator Decoration, Hotel decoration, Kitchen Equipment, Ceiling, Cabinet, Kitchen sink, Advertising Nameplate |
Lead Time | 10-15 Days after payment |
Pökkun | PVC, waterproof paper, strong sea-worthy wooden package,or as required. |
OEM | Accept |
Sample | Available |
Tengdar vörur
-
Lestu meiraFljótlegt útsýni
Aluminium foil
Aluminium foil is aluminium prepared in thin metal leaves with a thickness of less than 0.2mm (7.9 mils); thinner gauges down to 4 micrometers are also commonly used. Standard household foil is typically 0.016 Mm (0.63 mils) thick, and heavy-duty household foil is typically 0.024 Mm (0.94 mils). And the air conditioner foil can be thinner than 0.0047mm, and some food foil thinner than 0.002mm. The foil is pliable and can be readily bent or wrapped around objects. Thin foils are fragile and are sometimes laminated with other materials such as plastics or paper to make them stronger and more useful. It’s used industrially for a variety of purposes, including packing, insulation and transportation. At home, people use aluminum foil for food storage, to cover baking surfaces and to wrap foods, such as meats, to prevent them from losing moisture while cooking.
-
Lestu meiraFljótlegt útsýni
Copper Coils
It may seem that a copper coil is a simple piece of coiled wire that can be wound and put to use. As with any form of industrial product, copper coils have to be precisely engineered to fit an application. The winding process has to be completed with precision to ensure the proper distance between the wires and the diameter of the opening.
Each product that uses copper coils requires that a certain number of turns be made to provide the correct amount of resistance. Inaccurate calculations can lead to inefficiency and possible failure of the coil or device. For this reason, the engineers at Metal Associates guarantee that they have closely examined the specification of an application such that the diameter, spacing, wire thickness, and number of turns exactly matches the design of the product where the copper coil will be used.
-
Lestu meiraFljótlegt útsýni
Brass Strips
Brass Strip has higher strength than copper, good electrical and thermal conductivity, high corrosion resistance in the atmosphere and freshwater, and good plasticity, easy to cold and hot pressure processing, easy welding, forging and tin plating, no stress corrosion cracking.
-
Lestu meiraFljótlegt útsýni
Stainless Bar
A stainless steel bar stock is often used for production line machinery or in other industrial settings where durability is required. Stainless steel round bar types can be found in many different shapes such as hexagon, ferningur, or round bars. Stainless bar stock is a material that is non-corrosive, corrosion resistant, and durable. It can be used in a variety of industries such as automotive, Aerospace, construction, and manufacturing.
Stainless steel bar stock is the highest quality type of stainless steel in the industry. They are made with high-quality materials that make them resistant to corrosion and other environmental conditions. The stainless bar stock also has greater tensile strength than other types of stainless steel.
Stainless steel round rod products or round bars are commonly used for manufacturing products like car rims, motorcycle rims, bicycle rims, eða fleiri. These types of bars are typically made by rolling up sheets of stainless steel into long tubes before welding them together at the ends to create round rods or round bars that can be cut into smaller pieces
-
Lestu meiraFljótlegt útsýni
Stainless Steel Strips
Hot Rolled Stainless Steel Strips are produced from hot rolling billets or slabs and then use a cold rolling process. These processes improve strips mechanical properties such as stiffness coefficient and flexibility. Cold Rolled Stainless Steel Strips are obtained from annealed and pickled by cold rolling on polished rolls. As per the required thickness, cold rolling requires a number of passes through mill to effect reduction.
We supply SS Strips in various industries including food industries, chemical, electrical, generator, shaft, cement & gas industries. The offered these Stainless Steel Strips in standards as well as customized dimensions as per the client’s requirement.
-
Lestu meiraFljótlegt útsýni
Copper Strips
Copper strips have high electrical and thermal conductivity, that’s why copper strips are the best for transformer winding.
What’s more, copper strips transfer heat more effectively than other metals strips.
Copper strips are more malleable and have high tensile strength. Tæringarþol, high degree stability, and heat dissipation of copper strips are superior to other metals.
Copper strips are mostly used in the electrical and electronics sectors because copper is non-magnetic and non-sparking. Copper strips are mostly used in heat exchangers, transformers winding, Gufuþéttar, and lightning conductors.
Copper strip thickness range from 0.03mm to 3.0mm. Copper strips can be manufactured in different widths and thicknesses per the customer’s requirement.
Ef einhverjar spurningar, Vinsamlegast ekki hika við að hafa samband sales@grandsteeltube.com
-
Lestu meiraFljótlegt útsýni
Copper Rod
Copper bar is a kind of non-ferrous metal processing bar, which has better processing performance and high conductivity. It is mainly divided into brass rod (copper zinc alloy, cheaper), purple copper rod (higher copper content).
Brass rod is a rod shaped object made of copper and zinc alloy, named for its yellow color. The melting point of brass, which contains 56% to 68% kopar, is 934 to 967 Gráður. Brass has good mechanical properties and wear resistance, and can be used to manufacture precision instruments, ship parts, gun casings and so on. Used in air conditioning pipe, refrigerator pipe, oil pipe, water supply pipe and all kinds of mechanical materials, automotive synchronizer gear ring, Marine pump, valve, structural parts, friction accessories, o.s.frv.
Purple copper rod is named for its purple red color. It has good electric conductivity, heat conduction, corrosion resistance and processing properties. It can be welded and brazed. Characteristics: high purity, fine structure, low oxygen content. No porosity, trachoma, loose, excellent electrical conductivity, high precision of electroetching mold surface, after heat treatment process, no direction of the electrode, suitable for fine play, fine play, with good thermoelectric channel, processability, Sveigjanleiki, corrosion resistance and weather resistance.
-
Lestu meiraFljótlegt útsýni
Titanium Foil
Titanium foil is a titanium plate, strip, roll or sheet with a thickness of less than or equal to 0.2mm. The maximum width of rolled titanium foil is about 600mm.
The width of the titanium foil is cut according to the requirements of the user.But the wider the manufacturing, the higher the productivity.
Titanium foil is mainly used in aerospace, navigation, nuclear power, electronics, chemical industry, petroleum, precision manufacturing, medical pharmaceutical and other aspects. -
Lestu meiraFljótlegt útsýni
Aluminium Strip
Aluminum sheet & foil in the form of rolls with a thickness > 0.2Mm, a width 20mm to 100mm is generally called aluminium strip. The common name for aluminium strip that is produced in small strip widths is usually split strip. Aluminium sheets are cut into a required by slitting tooling, the raw material of aluminum strip is pure aluminium or aluminum alloy hot rolled cast-rolling aluminum coil and hot-rolled coil. Through a cold-rolled machine to form different thickness and width of the rolling sheet and aluminum coil, and then the vertical cutting and slitting machine for different width of the strip. And the thickness<0.2mm, we call it aluminum foil strip or aluminum foil coil.
-
Lestu meiraFljótlegt útsýni
Brass Coil
Brass coil has excellent plasticity (best in brass) and high strength, good machinability, easy to weld, very stable to general corrosion, but prone to corrosion cracking; brass coil is copper and the alloy of zinc is named for its yellow color.
The mechanical properties and wear resistance of the brass coil are very good, and can be used to manufacture precision instruments, ship parts, shells of guns, o.s.frv. Brass knocks up and sounds good, so instruments such as cymbals, cymbals, bells, and numbers are made of brass. According to the chemical composition, brass is divided into ordinary copper and special brass.
- DIN2391 Nákvæmni stálrör
- EN10305-1/4 Nákvæmni stálrör
- EN10305-2/3/5/6 Nákvæmnislampar
- SAE röð nákvæmni rör
- ISO8535-1 eldsneytisinnsprautunarrör
- Single/Doulbe Wall Bundy Tube
- Ketill & Þrýstistálrör
- Óaðfinnanlegur honed / SRB stálrör
- Ryðfrítt háræðastálrör
- Saumlaus ryðfríu rör & Pipes
- Soðin ryðfrí rör & Pipes
- Innspýting & Stýrileiðslurör
- Rör úr nikkelblendi & Pipes
- Hárpípur, aðrar en járn
- Álrör & Pipes
- Messingör & Pipes
- Koparrör & Pipes
- Títanrör & Pipes
- Pressað/soðin uggarör
- Nákvæmnisrör sem inniheldur ekki járn
- Sérstök löguð stálrör
- Málmspóla/þynna/þynnur/ræmur