- Description
- Inquiry
Specification
Product Name:Copper Brake Line Tubing Kit Fittings
Brake Line Length:25ft/7.62m/300inch
Brake Line Tubing Diameter: 3/16 in. O.D.( note:3/16″≠1/4″ )
Brake Line Tubing Wall thickness:0.028 in / 0.71mm
Blasting pressure: 150MPa
Maximum speed: 150 rpm
Temperature range: 150-200°C
Type:Brake Line
Package includes -1pcs
1 x 25 ft roll of 3/16 inch plated brake pipe
Package includes -16pcs
1 x 25ft roll of 3/16″ plated brake line tubing
10 x 3/8″-24 Tube Nuts
2x 7/16”-24 Tube Nuts
2 x 7/16”-24 Tube Nuts
Package includes -20pcs
1 x 25 ft roll of 3/16 inch plated brake pipe
10 x tube nuts
10 x pipe screw male
Related Products
-
Read MoreQuick View
PVF coated bundy steel tube
The bundy steel tube has fine inside cleanness, high strength, nice elongation, good foundation for late process , anti leakage, anti high pressure explosion, excellent anti corrosion power after surface treatment. It is an ideal material for tubes of automotive industry.The tube can be provided in coils or cut to length,etc.Thickness of PVF coating may reaches: 8μm,12μm,15μm,25μmIf any questions,please contact sales@grandsteeltube.com -
Read MoreQuick View
Double Wall Bundy Steel Tube
Bundy tube, also called Bundy pipe, is a double wall copper brazed steel tube. The manufacture of Bundy tube is a continuous process of rolling a copper coated steel strip through 720 degrees, brazing the outer and inner circle of the strip together by the melted copper layer to form a round tube with a continuous circular seam, and annealing. We are using fully automatic production lines with online process monitoring and continuous fabrication of the Bundy tubes.The bundy steel tube has fine inside cleanness, high strength, nice elongation, good foundation for late process , anti leakage, anti high pressure explosion, excellent anti corrosion power after surface treatment. It is an ideal material for tubes of automotive industry.The tube can be provided in coils or cut to length,etc.Thickness of copper coating: ≥3umIf any questions,please contact sales@grandsteeltube.com -
Read MoreQuick View
White Galvanized Bundy Tube
The bundy steel tube has fine inside cleanness, high strength, nice elongation, good foundation for late process , anti leakage, anti high pressure explosion, excellent anti corrosion power after surface treatment. It is an ideal material for tubes of condensation , evaporation and autos.The tube can be provided in coils or cut to length,etc.Thickness of zinc may reach 8um,12um,15um,20um,25um.If any questions,welcome to contact sales@grandsteeltube.com -
Read MoreQuick View
PVF Copper Brazed Bundy Tube-Brake Line
-
Read MoreQuick View
Low Carbon Colorful Bundy Tube
Colorful double wall bundy steel tube has fine inside cleanness, high strength, nice elongation, good foundation for late process , anti leakage, anti high pressure explosion, excellent anti corrosion power after surface treatment. It is an ideal material for tubes of condensation , evaporation and autos. The tube can be provided in coils or cut to straight length,etc.Thickness of znic may reach 8μm,12μm,15μm,20μm,25μm.If any questions,please contact sales@grandsteeltube.com -
Read MoreQuick View
Brazed Double Wall Tube for Automobile
Brazed Double Wall Bundy Tubes for automobiles produced by Grand are capable of extending the lifespan of automobiles and satisfy environmental regulations. They have been developed with high corrosion-resistance and are environmental-friendly.
Products manufactured with the latest technologies developed over 15 years are being mainly used in the pipelines of brakes and fuel systems. Outstanding in pressure resistance and mechanical properties, these tubes provide excellent rust-proofing together with high thermal transmission and low inner-fluid resistance.If any questions, please contact sales@grandsteeltube.com
-
Read MoreQuick View
Seamless CNG Steel Tube
CNG/LPG high pressure tube
1. standard and Material: ISO15500, seamless low carbon steel tube or seamless stainless steel tube.,etc
2. Treatment: bright annealed tubes; Air-tight test 30MPa
3. Product usage: CNG high pressure tube is used for LPG , CNG sequential injection system conversion kits.
4. Both ends of tube without rag, corner processing, smooth, absence of istortion.
5. Steel tube is seamless tube with bright annealing treatment
6. Inside of tube should be no rust
7.Bending tube with tools of 25mm radius, bending torsion is no more than 11NM
8. Packing: PVC package requirement in cartons -
Read MoreQuick View
Copper-Nickel Automotive Vehicle Brake Tubing
A vehicle’s braking system is as crucial to a vehicle’s performance as its engine and drive train. The tubing carrying pressurized air or fluid through the system is the vital link between master cylinder and slave cylinders at the wheels.
Brake system tubing is vulnerable to the pressures of air or fluid flowing through it, to corrosion from road mud and salt, and to damage of any protective coatings on its surfaces from stone pecking where it is exposed under the chassis.
Copper-nickel alloy C70600, an alloy of 90% copper and 10% nickel, is inherently corrosion resistant to road salt, and its use as brake tubing is increasing based on: 1) Changing life-expectancy for automotive vehicles; 2) Worldwide service-experience data on brake tubing wear; and 3) Increasing cost of corrosion-retarding coatings for steel brake tubing.
If any questions, please feel free to contact sales@grandsteeltube.com
-
Read MoreQuick View
Single Wall Bundy Steel Tube
The bundy steel tubes have fine inside cleanness, high strength, nice elongation, good foundation for late process , anti leakage, anti high pressure explosion, excellent anti corrosion power after surface treatment. It is an ideal material for tubes of condensation,evaporation and autos.If any questions,you are more than welcome to contact sales@grandsteeltube.com -
Read MoreQuick View
Galfan Coating Bundy Tube
Bundy tube, also called Bundy pipe, is a double wall copper brazed steel tube. The manufacture of Bundy tube is a continuous process of rolling a copper coated steel strip through 720 degrees, brazing the outer and inner circle of the strip together by the melted copper layer to form a round tube with a continuous circular seam, and annealing. We are using fully automatic production lines with online process monitoring and continuous fabrication of the Bundy tubes.The bundy steel tube has fine inside cleanness, high strength, nice elongation, good foundation for late process , anti leakage, anti high pressure explosion, excellent anti corrosion power after surface treatment. It is an ideal material for tubes of automotive industry.The tube can be provided in coils or cut to length,etc.Thickness of copper coating: ≥3umIf any questions,please contact sales@grandsteeltube.com
- DIN2391 Precision Steel Tube
- EN10305-1/4 Precision Steel Tube
- EN10305-2/3/5/6 Precision Tubes
- SAE Series Precision Tubes
- ISO8535-1 Fuel Injection Tube
- Single/Doulbe Wall Bundy Tube
- Boiler & Pressure Steel Tubes
- Seamless Honed/SRB Steel Tube
- Stainless Capillary Steel Tubes
- Seamless Stainless Tubes & Pipes
- Welded Stainless Tubes & Pipes
- Injection & Control Line Tubes
- Nickel Alloy Tubes & Pipes
- Non-ferrous Capillary Tubes
- Aluminium Tubes & Pipes
- Brass Tubes & Pipes
- Copper Tubes & Pipes
- Titanium Tubes & Pipes
- Extruded/Welded Fin Tube
- Non-Ferrous Precision Tube
- Special Shaped Steel Tubes
- Metallic Coil/Foil/Sheet/Strip