Pancake Seamless Copper Tubes

Copper tubes are easy to install, inexpensive to transport and have long life spans with low maintenance. Because they are compatible with a large range of liquids and are so resistant to a wide variety of environmental conditions, tubes made of copper provide a long term performance that is extremely cost effective over long periods of time. They form piping systems both above and below ground, in freezing temperatures as well as in high heat applications. Fire sprinkler systems, cryogenic plants, air conditioning and refrigeration systems, hospital oxygen systems, gas and steam heating systems and drain/vent systems all use copper tubes as pipes. They also take up less space than other metal pipes.

In order to ensure safety and quality, all copper tubes must adhere to strict ASTM (American Society for Testing and Materials) standards concerning copper purity, design, fittings and liquid/gas compatibility. They are generally formed by the extrusion process, which fabricates seamless tubes with uniform wall thickness and a smooth surface. Solid-profile copper billets in the shape of rods are heated until malleable and then forced through a series of smaller and smaller molds in the shape of a tube until the desired shape has been reached. After extrusion, they are often bent using rollers or mandrels, and attached to each other at the ends by welding.

Most copper tubes have threaded ends, one male and one female, so they can easily attach and detach from one another. The threading is non-permanent but still provides a reliable, air and water tight seal. Sometimes tubes are joined by brazing, a welding technique that uses nonferrous filler material. A benefit of copper tubes is their flammability and explosion resistance. If a fire does start within the tube, it will not travel farther into the pipe system. Copper tubes can have either soft or hard tempers, which is the metal’s overall hardness. This is accomplished by post-fabrication heat treatments.

Ef einhverjar spurningar,Þér er meira en velkomið að hafa samband sales@grandsteeltube.com

1. Vinna með viðskiptavinum frá Evrópu,Vestur-Asía,Norður-Ameríka,Suður-Ameríka, Since 2006 o.s.frv

2. Production of seamless copper tubes & pipes since 2005.

3. Hægt er að afhenda sýni innan 25 dögum eftir staðfestingu

4. 40 daga sem framleiðslutímabil og afhending eftir staðfestingu pöntunar.

5. 150,000 meters of seamless copper tubes in stock.

6. 50 stærðir er hægt að bjóða frá OD:6.35mmxWT:0.41mm til od:12.7mmxWT:1.65Mm

7. Skoðun þriðja aðila eins og:TUV,BV,SGS,osfrv samþykkt

8. Fagteymi aðstoðar sérstakar kröfur þínar um rör.

Ef einhverjar spurningar,Þér er meira en velkomið að hafa samband sales@grandsteeltube.com