Chrome Plated Round Bars
Chrome plated round bar is mostly designed to be used for hydraulic piston rod and pneumatic piston rod manufacturing and repairing. So some people also may call this product hydraulic cylinder rod approximately.
Hins vegar, besides the above, chrome plated rods can also be used in applications where high performance surface finishing and high accuracy dimension tolerance are required.
Here below is the application list of the chrome rods:
- Hydraulic cylinders (chrome plated piston rods)
- Pneumatic cylinders / air cylinders (chrome plated piston rods)
- Guide rods for plastic manufacturing machine and hydraulic machinery
- Rollers for machines, such as packing machine rollers, printing machine rollers
- Shaft for machinery, such as Textile machinery center axle, Transport machinery center axle, o.s.frv.
- Ejector rods for injection molding machines
- Vibration absorbers and pistons for some industrial machinery.
Ef einhverjar spurningar,vinsamlegast hafðu samband sales@grandsteeltube.com
- Lýsing
- Advantages of Chrome Plated Bars
- Upplýsingar
- Fyrirspurn
Efni: | CK45, SAE1045, 4140, 4340, JIS45C, 40Cr, 20MnV6, 42CrMo, SS431, SS430, Ryðfrítt stál 304/316/2205, o.s.frv. |
Diameter: | Φ 6-500mm |
Lengd: | max 12m |
Chrome layer: | 20 micron (Min) to 100 micron |
Hardness of the chrome layer: | 850 HV (Min) – 1150 HV |
Roughness: | Ra ≤ 0.2μm |
Straightness: | ≤ 0.5/1000 |
Diameter tolerance: | ISO f7/h8/g6 |
Roundness: | Half of the tolerance ISO f7 |
Delivery condition: | Hard Chrome Piston Rod ( HRC 15-20) |
Quenched & Tempered (Q+T) Rod (HRC 28-32) | |
Induction Hardened Rod (HRC 55-62) | |
Q+T Induction Hardened Rod (HRC 60-65) | |
Tæringarþol: | Test in natural salt spray according to ASTM B 117-96 Klukkustundir. |
Pökkun: | Anti-rust oil to be spread on rod surface and each rod to be packed in paper roll and then in wooden case. |
1. Carbon steel balances durability, harka, and wear resistance using formability, weldability, and durability;
2. Chrome plating provides corrosion resistance along with an Extremely reflective look
3. High precision tolerances, which ensures when used to make hydraulic piston rod, it can fit the cylinder precisely.
4. Good Hardness: the surface hardness attaining HV850 minimal and upward, which not only help improve wear resistance but also help extend the life span of these chrome plated rods, thereby helping the consumer save the cost.
5. High performance of strength: The yield strength of chrome plated bars can be 75000 psi up to 100000 Psi.
Ef einhverjar spurningar,Þér er meira en velkomið að hafa samband sales@grandsteeltube.com
CHEMICAL COMPOSITION (%) |
|||||||
Efni |
C% |
Mn% |
Si% |
S% |
P% |
V% |
Cr% |
<= |
|||||||
CK45 |
0.42-0.50 |
0.50-0.80 |
0.17-0.37 |
0.035 |
0.035 |
||
ST52 |
<=0.22 |
<=1.6 |
<=0.55 |
0.035 |
0.035 |
||
20MnV6 |
0.16-0.22 |
1.30-1.70 |
0.10-0.50 |
0.035 |
0.035 |
0.10-0.20 |
|
42CrMo4 |
0.38-0.45 |
0.60-0.90 |
0.15-0.40 |
0.03 |
0.03 |
0.90-1.20 |
|
4140 |
0.38-0.43 |
0.75-1.0 |
0.15-0.35 |
0.04 |
0.04 |
0.80-1.10 |
|
40Cr |
0.37-0.45 |
0.50-0.80 |
0.17-0.37 |
0.80-1.10 |
AFLFRÆÐILEGIR EIGINLEIKAR |
|||||
Efni |
T.S. Mpa |
Y.S. Mpa |
E% |
Impact |
Condition |
(Min) |
|||||
CK45 |
610 |
355 |
15 |
>39J |
Hot Rolled |
CK45 |
800 |
630 |
20 |
>41J |
Q+T |
ST52 |
630 |
520 |
14 |
Kalt dregið | |
20MnV6 |
750 |
590 |
12 |
>40J |
Hot Rolled |
42CrMo4 |
980 |
850 |
14 |
>47J |
Q+T |
4140 |
1080 |
930 |
12 |
Q+T | |
40Cr |
1000 |
800 |
10 |
Q+T |
Ef einhverjar spurningar,Þér er meira en velkomið að hafa samband sales@grandsteeltube.com
Tengdar vörur
-
Lestu meiraFljótlegt útsýni
Hydraulic Cylinder Tubes
Applications of Hydraulic honed tubing
Honed tubing and SRB tubes (skived and roller burnished tubes) are mostly used as cylinder tube, such as hydraulic cylinder tube and pneumatic cylinder tubing, which are widely used for manufacturing and repairing hydraulic cylinders and pneumatic cylinders. As honed tube usually has very accuracy dimension tolerance and good surface smoothness, so this product is also used in applications where precision dimension or high smooth surface is need.
Ef einhverjar spurningar,vinsamlegast hafðu samband sales@grandsteeltube.com
-
Lestu meiraFljótlegt útsýni
Stainless Cylinder Tubes
Stainless steel Pneumatic Cylinder Tube is produced by seamless or welded stainless through careful production process.
Main Grade:TP304/304L, TP316/316L,1.4301,1.4304,1.4401,1.4404
Stærð:OD9.53mm-131mm With WT: 0.635-5Mm. 3M or 6M as the length.
ASTM A269 and with the ID tolerance H10 or H11.
The roughness OD ≤Ra 0.8 and ID ≤8 Ra 0.4
Grand can meet the mechanical properties like hardness,
tensile strength, yield strength, elongation and ovality etc.
Ef einhverjar spurningar,vinsamlegast hafðu samband sales@grandsteeltube.com
-
Lestu meiraFljótlegt útsýni
CK45 Chrome Plated Bar
-
Lestu meiraFljótlegt útsýni
4140 hard chrome plated rod
Steel 4140 is AISI standard grade, it is a kind of alloy structural steel, equivalent to China standard GB 42CrMo.
SAE 4140 alloy steel has high fatigue strength and low notch sensitivity, high low temperature impact toughness, no obvious temper brittleness, and is mainly used in the quenched and tempered state. It is used to manufacture high-strength parts and parts with large cross-sections and other stress-bearing components under impact load. Such as high strength Hydraulic cylinder rods, penaumatic cylinder rods, the transmission eccentric shaft of the horizontal forging machine, the crankshaft of the forging press, o.s.frv.4140 chrome plated rod is manufactured through SAE 4140 steel bar, by using high precision centerless grinding and polishing methods, and then chrome plated to a min. plating thickness of 20 microns (0.0008″), 25 microns (0.001″), or other. The chrome plating layer provides corrosion resistance and a highly reflective appearance.
4140 chrome plated rods are used widely by the hydraulic industries and pneumatic industries, and is also widely usually used for applications where high yield strength and tensile strength is required.
-
Lestu meiraFljótlegt útsýni
Air Cylinder Tubing
The common alloy No. of air cylinder tubing is 6063 og 6061. They are both great in formability, weldability, and corrosion resistance together with excellent appearance.
Grand also capable of extruding other alloys no. for air cylinder tubing, for example, 7000 series, 5000 series, 3000 series, 2000 series, og 1000 series, consult our expert engineers to get more info regarding this extraordinary aluminum alloy no.
-
Lestu meiraFljótlegt útsýni
Oil Cylinder Steel Tubes
Applications of Hydraulic honed tubing
Honed tubing and SRB tubes (skived and roller burnished tubes) are mostly used as cylinder tube, such as hydraulic cylinder tube and pneumatic cylinder tubing, which are widely used for manufacturing and repairing hydraulic cylinders and pneumatic cylinders. As honed tube has very accuracy dimension tolerance and good surface smoothness, so this product is also used in applications where precision dimension or high smooth surface is need.
Ef einhverjar spurningar,vinsamlegast hafðu samband sales@grandsteeltube.com
-
Lestu meiraFljótlegt útsýni
Skived & Roller Burnished Tube
Applications of Hydraulic honed tubing
Honed tubing and SRB tubes (skived and roller burnished tubes) are mostly used as cylinder tubes, such as hydraulic cylinder tubes and pneumatic cylinder tubings which are widely used for manufacturing and repairing hydraulic cylinders and pneumatic cylinders. As honed tube usually has very accuracy dimension tolerance and good surface smoothness, so this product is also used where precision dimension or high smooth surface is needed.
Ef einhverjar spurningar,vinsamlegast hafðu samband sales@grandsteeltube.com
- DIN2391 Nákvæmni stálrör
- EN10305-1/4 Nákvæmni stálrör
- EN10305-2/3/5/6 Nákvæmnislampar
- SAE röð nákvæmni rör
- ISO8535-1 eldsneytisinnsprautunarrör
- Single/Doulbe Wall Bundy Tube
- Ketill & Þrýstistálrör
- Óaðfinnanlegur honed / SRB stálrör
- Ryðfrítt háræðastálrör
- Saumlaus ryðfríu rör & Pipes
- Soðin ryðfrí rör & Pipes
- Innspýting & Stýrileiðslurör
- Rör úr nikkelblendi & Pipes
- Hárpípur, aðrar en járn
- Álrör & Pipes
- Messingör & Pipes
- Koparrör & Pipes
- Títanrör & Pipes
- Pressað/soðin uggarör
- Nákvæmnisrör sem inniheldur ekki járn
- Sérstök löguð stálrör
- Málmspóla/þynna/þynnur/ræmur