Seamless Boiler Tube A192
Seamless medium-carbon steel boiler and super heater tubes.
● Application: for boilers, super heaters, steam line pipes of boiler
● Size range: O.D.: 12.7-114.3mm W.T.: 1.65-10mm L.: 18000mm max
Jika ada pertanyaan,silahkan hubungi:sales@grandsteeltube.com
- Deskripsi: __________
- Keuntungan Baosheng
- Chemical Composition & Mechanical Properties
- Penyelidikan
ASTM A192 Carbon Steel Tube specification covers Seamless Carbon Steel Boiler Tubes for High-Pressure Service. Recommended pipe size will be developed by us upon receipt of your inquiry. A print or sketch of the part to be produced should be included. Derajat, chemical analysis and surface condition are carefully considered, and production processes are tailored to achieve the best tubing for the end use.
ASTM A192 Seamless Steel Tube is applied as minimum-wall-thickness, seamless carbon steel boiler and superheater tubes for high-pressure service, Grand supplies ASTM A192 steel tube in hot rolled and cold drawn delivery state, It is generally used for high-pressure boiler (working pressure does not exceed 9.8Mpa and the working temperature between 450 ℃ -650 ℃) heating surface tubes, header, economizer, superheater, reheater.
Additional Fabrication Service: ASTM A192 Tube End（plain end, beveled end, coupling）; Coating（Epoxy Coating, Coulor Paint coating, 3LPE Coating）, Bending and othering fabrication according to customer requirement.
1. Production of A192 seamless steel tubes since 2005.
2. Bekerja dengan pelanggan dari Eropa,Asia Barat,Amerika Utara,Amerika Selatan,dll sejak 2006.
3. Sampel dapat dikirim dalam 25 hari setelah konfirmasi
4. 40 hari sebagai periode produksi dan pengiriman setelah konfirmasi pesanan.
5. 15,000 meter tabung baja mulus dalam stok.
6. 200 ukuran dapat ditawarkan dari OD:12.7mmxWT:1.65mm ke OD:114.3mmxWT:10Mm
7. Inspeksi pihak ketiga seperti:TUV,BV,SGS,dll diterima
8. Tim profesional membantu persyaratan tabung khusus Anda.
9. Tabung terkait lainnya:A179,A192,A213 seamless steel tube;dll
Jika ada pertanyaan,Anda dipersilakan untuk menghubungi sales@grandsteeltube.com
Table 1: Steel grade and chemical composition:
| C | 0.06-0.18 |
| Mn | 0.27-0.63 |
| P | ≤0.035 |
| S | ≤0.035 |
| Si | ≤0.25 |
Mechanical property:
Kekuatan tarik: Min 47 ksi (325 Mpa)
Yield strength: Min 26 ksi (180Mpa)
Elongasi: ≥35%
Hardness
Brinell hardness: W.T≥0.200 inches (5.1Mm), then 137HB
Rockwell hardness: W.T≥0.200 inches (5.1Mm), then 77HRB
Tolerance for O.D. and W.T.(SA-450/SA-450M)
| O.D. inch (Mm) | + | - | W.T. inch (Mm) | + | - |
| <1”(25.4) | 0.10 | 0.10 | ≤1.1/2”(38.1) | 20% | 0 |
| 1”-1.1/2”(25.4-38.1) | 0.15 | 0.15 | >1.1/2”(38.1) | 22% | 0 |
| 1.1/2”-2”(38.1-50.8) | 0.20 | 0.20 | - | - | - |
| 2”-2.1/2”(50.8-63.5) | 0.25 | 0.25 | - | - | - |
| 2.1/2”-3”(63.5-76.2) | 0.30 | 0.30 | - | - | - |
| 3”-4”(76.2-101.6) | 0.38 | 0.38 | - | - |
Produk Terkait
-
Baca Lebih LanjutTampilan CepatEN10216-1/DIN1629 Seamless Steel Tubes
-
Baca Lebih LanjutTampilan Cepat100Cr6 Bearing Steel Tube
Bearing steel pipe refers to hot rolled or cold rolled (cold drawn) seamless steel pipe used for manufacturing ordinary rolling bearing rings. The outer diameter of the steel pipe is 25-180mm, and the wall thickness is 3.5-20mm, which can be divided into two types: ordinary precision and higher precision. Bearing steel is used to make balls, rollers and bearing rings. Bearing works under great pressure and friction, so bearing steel is required to have high and uniform hardness, wear resistance and high elastic limit.
The requirements for the uniformity of chemical composition, the content and distribution of non-metallic inclusions, and the distribution of carbides of bearing steel are very strict. It is one of the most stringent steel grades in all steel production.
Jika ada pertanyaan, silahkan hubungi sales@grandsteeltube.com
-
Baca Lebih LanjutTampilan CepatAPI5L/A106B Seamless Steel Tubes
-
Baca Lebih LanjutTampilan CepatPaduan Tembaga U Bend Tube
Tabung lentur U paduan tembaga dan Cu dilakukan dengan metode kerja dingin dan sedang dilakukan dengan radius tikungan yang diperlukan sesuai gambar klien. U-bend tabung / pipa dapat dibuat dari berbagai bahan pipa yang mengandung baja tahan karat hasil tinggi dan rendah, baja paduan, Baja karbon,Monel , Inconel, Hastelloy,Duplex , Dupleks Super,titanium,paduan tembaga dan paduan Cr-Ni. Biasanya U-tikungan diproduksi dari tabung mulus, selanjutnya dapat disesuaikan dalam hal ketebalan dan ukuran sesuai kebutuhan spesifik klien kami. Mereka mudah untuk merakit bundel tabung lebih lanjut.
Grand menyediakan pipa U bend Tubes di berbagai industri untuk berbagai aplikasi seperti di Boiler, Kondensor, Evaporator,bundel tabung untuk Penukar Panas, Pendingin/Inter-pendingin, Chiller, dan sebagainya. Ini juga digunakan dalam industri yang berbeda seperti di Pabrik Pupuk, Industri Gula, Pabrik Baja,Minyak & Pabrik gas, Kimiawi & Pabrik petrokimia, Kilang, Pembangkit, Pembangkit energi terbarukan dll.
-
Baca Lebih LanjutTampilan CepatA210 Seamless Boiler Steel Tube
Seamless medium-carbon steel boiler and super heater tubes.
● Application: for boilers, super heaters, steam line pipes of boiler
● Size range: O.D.: 12.7-114.3mm W.T.: 1.65-10mm L.: 18000mm maxJika ada pertanyaan,silahkan hubungi:sales@grandsteeltube.com
-
Baca Lebih LanjutTampilan CepatTitanium U Bend tube
Titanium U Bend tube is carried out by cold working method and is being done to the necessary bend radius as per client drawings. U-bend tabung / pipa dapat dibuat dari berbagai bahan pipa yang mengandung baja tahan karat hasil tinggi dan rendah, baja paduan, Baja karbon,Monel , Inconel, Hastelloy,Duplex , Dupleks Super,titanium,paduan tembaga dan paduan Cr-Ni. Biasanya U-tikungan diproduksi dari tabung mulus, selanjutnya dapat disesuaikan dalam hal ketebalan dan ukuran sesuai kebutuhan spesifik klien kami. Mereka mudah untuk merakit bundel tabung lebih lanjut.
-
Baca Lebih LanjutTampilan CepatEN10297-1 Seamless Steel Tubes
-
Baca Lebih LanjutTampilan CepatA355 Seamless Alloy Steel Tube
The A335 pipes has a high level of Chromium and Molybdenum presence in it. While Molybdenum increases the overall strength, resistance, elasticity, hardenability and overall quality, moly ensures that the material is more resistant to softening, restrains the growth of grains and lessens the chances of embrittlement. It is the single additive that is responsible for the increase in high temperature resistance and it also improves the corrosion resistance to steel.
-
Baca Lebih LanjutTampilan CepatSeamless Steel Tube A213
Seamless ferrites and austenitic alloy-steel boiler, super heater, and heat-exchangers tubes.
● Application: for boilers, super heaters, heat-exchangers.
● Size range: O.D.:12.7-114.3 mm W.T.: 1.65-10mm L.: 18000mm max.Jika ada pertanyaan,silahkan hubungi sales@grandsteeltube.com
-
Baca Lebih LanjutTampilan CepatSeamless Steel Tube A179
Seamless cold-drawn low-carbon steel hear-exchanger tubes and condenser tubes.
● Application: for boilers, super heaters, heat-exchangers, condensers.
● Size range: O.D.: 12.7-114.3mm W.T.: 1.65-10mm L.: 18000mm maxJika ada pertanyaan,silahkan hubungi sales@grandsteeltube.com