Paduan Tembaga U Bend Tube
Tabung lentur U paduan tembaga dan Cu dilakukan dengan metode kerja dingin dan sedang dilakukan dengan radius tikungan yang diperlukan sesuai gambar klien. U-bend tabung / pipa dapat dibuat dari berbagai bahan pipa yang mengandung baja tahan karat hasil tinggi dan rendah, baja paduan, Baja karbon,Monel , Inconel, Hastelloy,Duplex , Dupleks Super,titanium,paduan tembaga dan paduan Cr-Ni. Biasanya U-tikungan diproduksi dari tabung mulus, selanjutnya dapat disesuaikan dalam hal ketebalan dan ukuran sesuai kebutuhan spesifik klien kami. Mereka mudah untuk merakit bundel tabung lebih lanjut.
Grand menyediakan pipa U bend Tubes di berbagai industri untuk berbagai aplikasi seperti di Boiler, Kondensor, Evaporator,bundel tabung untuk Penukar Panas, Pendingin/Inter-pendingin, Chiller, dan sebagainya. Ini juga digunakan dalam industri yang berbeda seperti di Pabrik Pupuk, Industri Gula, Pabrik Baja,Minyak & Pabrik gas, Kimiawi & Pabrik petrokimia, Kilang, Pembangkit, Pembangkit energi terbarukan dll.
- Deskripsi: __________
- Penyelidikan
Tabung lentur U paduan tembaga dan Cu dilakukan dengan metode kerja dingin dan sedang dilakukan dengan radius tikungan yang diperlukan sesuai gambar klien. U-bend tabung / pipa dapat dibuat dari berbagai bahan pipa yang mengandung baja tahan karat hasil tinggi dan rendah, baja paduan, Baja karbon,Monel , Inconel, Hastelloy,Duplex , Dupleks Super,titanium,paduan tembaga dan paduan Cr-Ni. Biasanya U-tikungan diproduksi dari tabung mulus, selanjutnya dapat disesuaikan dalam hal ketebalan dan ukuran sesuai kebutuhan spesifik klien kami. Mereka mudah untuk merakit bundel tabung lebih lanjut.
Grand menyediakan pipa U bend Tubes di berbagai industri untuk berbagai aplikasi seperti di Boiler, Kondensor, Evaporator,bundel tabung untuk Penukar Panas, Pendingin/Inter-pendingin, Chiller, dan sebagainya. Ini juga digunakan dalam industri yang berbeda seperti di Pabrik Pupuk, Industri Gula, Pabrik Baja,Minyak & Pabrik gas, Kimiawi & Pabrik petrokimia, Kilang, Pembangkit, Pembangkit energi terbarukan dll.
Production process:
straight pipe – bending before 100% flaw detection – reliable bending machine and precision bending mould – bending after the U-shaped part of the electric heating stress relief annealing – bending after 100% water pressure
What special:
All the above mentioned material can be supplied:in straight length U-bent finned with low fins
These pipe/tube Bend are seamless,by Large-radius Pipe Bend for pneumatic conveyors
Pipe Bend are absolutedly wrinkle-free,no start-up bulges,Extremely low ovality Pipe Bend.
Visually aesthetic surface,Deburred sawing edges,No scratching or scoring.
Leg extension each side, Easy installation,Safe for use with food.
Copper and Cu alloytubesstandard and materialgrades:
JIS H3300 C1220 ASTM B68 C12200 BS2871 C106 EN 12735-2 CU-DHP DIN SF-Cu ,bundel tabung untuk Penukar Panas.
ASTM B135 C33000 C28000 C27000 C27200 C27400 C26000 C26200 C26800 C23000 Condensers, Evaporator, Pendingin/Inter-pendingin, Chiller.
ASTM B111 C68700 Aluminium brass tube BS EN12451(B2871) CuZn20A12As (CZ110) Condenser brass tube JIS H3300 C6870 Condensers, Evaporator.
ASTM B111 C44300 Admiralty brass tube BS EN12451(B2871) CuZn28Sn1As (CZ111) Condenser brass tube JIS H3300 C4430 Condensers, Evaporator, Pendingin/Inter-pendingin, Chiller.
ASTM B111 C70600 Copper-nickel tube BS EN12451(B2871) CuNi10Fe1Mn(CN102) Condenser CuNi tube JIS H3300 C7060 Evaporators Cu Ni tube.
ASTM B111 C71500 Copper-nickel tube BS EN12451(B2871) CuNi30Fe1Mn(CN107) CuNi30Fe1Mn(CN108) JIS H3300 C7150 Cuni tube for Condensers, Evaporator, Pendingin/Inter-pendingin, Chiller.
ASTM B111 C71640 Copper-nickel tube BS EN12451(B2871) CuNi30Fe1Mn(CN108) Cuni tube JIS H3300 C7164 95/5 Copper nickel tube bundles for Heat Exchangers
Produk Terkait
-
Baca Lebih LanjutTampilan CepatLaser Fin Tube
Laser welding finned tube is a new, wear-resistant and efficient heat exchange material in the fin tube welding industry. It is a high-efficiency and energy-saving heat exchange element with high heat exchange efficiency, large heat dissipation area, long service life and temperature adaptation It has a wide range, high pressure, and conforms to the national energy conservation and environmental protection emission standards. It is widely used in waste heat recovery, petrochemical industry, power station boilers, economizers, passenger cars, industrial and civil building heating, refrigeration systems and other industries.
The laser welding fin tube is a fin tube laser welding machine that integrates laser technology, hardware molds, and numerical control automatic control. It is simple to operate and flexible and convenient to manufacture. Overcoming a series of problems in the welding process of laser welding finned tubes, such as fracture, slow speed, poor forming, and wrinkling. Datang has now successfully mastered the welding of finned tubes such as laser welding finned tubes and heat exchangers. The production and coordination of all parameters and automatic fixtures.
-
Baca Lebih LanjutTampilan CepatSeamless Boiler Tube A192
Seamless medium-carbon steel boiler and super heater tubes.
● Application: for boilers, super heaters, steam line pipes of boiler
● Size range: O.D.: 12.7-114.3mm W.T.: 1.65-10mm L.: 18000mm maxJika ada pertanyaan,silahkan hubungi:sales@grandsteeltube.com
-
Baca Lebih LanjutTampilan CepatEN10216-1/DIN1629 Seamless Steel Tubes
-
Baca Lebih LanjutTampilan CepatStud Fin Tube
The STUDDED Fin Tube is manufactured by Resistance Welding of Studs on the Bare tubes.
The fins are manufactured by welding of the Fin Material which is essential a stud or rod welded at base to the tube by Electrical Resistance Process.
The current is made to flow through the Tube and the base of the studs. The studs are specifically made in shapes to facilitate the welding process. The Stud; during the finning “welding” process is also mechanically pressed on the tube at the point of welding thence causing a very good mechanical bond. This type of Fin Tube find very good application in high pressure and high temperature applications. The mechanical bond is very strong and hence finds application in places where extreme mechanical load, stress is expected while during the process or cleaning etc.
These Fin Tubes find application in Finned Pipes, Air Coolers, Heat Exchangers etc and are preferred in Industries like Petrochemical Refineries, Power Plants, Chemical Industries, Pabrik Baja, dll.
-
Baca Lebih LanjutTampilan CepatExtruded Copper Fin Tube
Copper is a metal element, and pure copper is a soft metal. The surface is reddish orange with metallic luster when it is just cut open, and its simple substance is purple-red. Good ductility, high thermal conductivity and electrical conductivity, so it is the most commonly used material in cables and electrical and electronic components.
It can also be used as a building material and can be composed of many alloys. Copper alloys have excellent mechanical properties and low electrical resistivity. The most important ones are bronze and brass. Sebagai tambahan, copper is also a durable metal that can be recycled multiple times without compromising its mechanical properties.
-
Baca Lebih LanjutTampilan CepatSeamless Fin Tube
A fin tube is a tube that has small fins around the outside surface.
These fins act as a filter and a mechanism to transfer heat from the material inside the tube to the outside space or vice versa. Fin tubes are used in applications that require a transfer of heat from a hot fluid to a colder fluid through the tube’s wall.
Grand provide a wide range of fin tubes(carbon, stainless,copper,aluminium,titanium,dll;) are used in heat exchangers (udara, water and chemically cooled)for various industries such as petroleum, petrochemical, steel, power generation and many more.
-
Baca Lebih LanjutTampilan CepatSeamless Steel Tube A179
Seamless cold-drawn low-carbon steel hear-exchanger tubes and condenser tubes.
● Application: for boilers, super heaters, heat-exchangers, condensers.
● Size range: O.D.: 12.7-114.3mm W.T.: 1.65-10mm L.: 18000mm maxJika ada pertanyaan,silahkan hubungi sales@grandsteeltube.com
-
Baca Lebih LanjutTampilan CepatTabung Sirip Aluminium
Bahan sirip aluminium benar-benar menutupi tabung, kecuali di ujung di mana lapisan tabung dapat diterapkan. Di mana korosi atmosfer hadir dan ketika dioperasikan dalam batas suhu desain, tabung bersirip yang diekstrusi memberikan kinerja paling stabil dari waktu ke waktu dibandingkan dengan jenis sirip lainnya. Sirip digulung dari tabung aluminium luar dengan proses menggunakan tekanan untuk membuat "ikatan tekanan" yang digulung antara tabung liner dan sirip.
-
Baca Lebih LanjutTampilan CepatLow Alloy U Bend Tube
U bending tube is carried out by cold working method and is being done to the necessary bend radius as per client drawings. U-bend tabung / pipa dapat dibuat dari berbagai bahan pipa yang mengandung baja tahan karat hasil tinggi dan rendah, baja paduan, Baja karbon,Monel , Inconel, Hastelloy,Duplex , Dupleks Super,titanium,paduan tembaga dan paduan Cr-Ni. Biasanya U-tikungan diproduksi dari tabung mulus, selanjutnya dapat disesuaikan dalam hal ketebalan dan ukuran sesuai kebutuhan spesifik klien kami. Mereka mudah untuk merakit bundel tabung lebih lanjut.
Grand menyediakan pipa U bend Tubes di berbagai industri untuk berbagai aplikasi seperti di Boiler, Kondensor, Super Heaters,bundel tabung untuk Penukar Panas, Pendingin/Inter-pendingin, Chiller, dan sebagainya. Ini juga digunakan dalam industri yang berbeda seperti di Pabrik Pupuk, Industri Gula, Pabrik Baja,Minyak & Pabrik gas, Kimiawi & Pabrik petrokimia, Kilang, Pembangkit, Pembangkit energi terbarukan dll.
-
Baca Lebih LanjutTampilan CepatTitanium U Bend tube
Titanium U Bend tube is carried out by cold working method and is being done to the necessary bend radius as per client drawings. U-bend tabung / pipa dapat dibuat dari berbagai bahan pipa yang mengandung baja tahan karat hasil tinggi dan rendah, baja paduan, Baja karbon,Monel , Inconel, Hastelloy,Duplex , Dupleks Super,titanium,paduan tembaga dan paduan Cr-Ni. Biasanya U-tikungan diproduksi dari tabung mulus, selanjutnya dapat disesuaikan dalam hal ketebalan dan ukuran sesuai kebutuhan spesifik klien kami. Mereka mudah untuk merakit bundel tabung lebih lanjut.