Stainless Steel Strip is an austenitic chromium-nickel-manganese stainless steel that offers electromagnetic properties like electrical resistivity, magnetic permeability & electrical conductivity and Young’s Modulus of Elasticity. We offer these stainless steel strips in various material grades such as Stainless Steel 304 Strips, Paslanmaz Çelik 310 Strips, Paslanmaz Çelik 316 Strips, Paslanmaz Çelik 904 Strips and many more.
Titanium coils
Because of the poor thermal conductivity of pure titanium, the emulsion with good lubrication effect and excellent cooling performance is required in the rolling process, and the rolling speed should not be too fast, in order to prevent the high temperature of pure titanium and cause the phenomenon of “sticking roller”, and “sticking roller” resulting in rough surface of titanium and poor quality. The residual water and oil on the surface of the titanium strip decompose during the annealing process, which affects the partial pressure of oxygen in the furnace and causes the decomposition reaction to go in the opposite direction, forming oxidation on the surface of the titanium strip and affecting the annealing quality. Because titanium strip annealing before full degreasing cleaning and drying plate surface. The degreasing speed of titanium strip is generally 20m/min, and the speed is adjusted according to the surface quality of the titanium strip after degreasing. Straightening is to ensure the flatness of the product plate.
- Tarif
- Özellikler
- Soruşturma
Manufacturing process
Cold rolled titanium coil due to different production processes (or finished product surface) generally divided into cold rolled pickling surface titanium coil and cold rolled glossy titanium coil.
The manufacturing process of cold rolled pickling surface titanium coil of XRUN is: sponge titanium — melting — forging — sıcak haddeleme — ısıl — shot blasting — hot rolled pickling white roll — soğuk haddeleme — ısıl — shot blasting — pickling — edge cutting — inspection — cold rolled pickling white roll — packing and storage.
production process
In the production process, because the product is rolled twice, the oxide scale will be produced. Two heat treatment and shot blasting pickling are the treatment of the oxide scale on the surface of the product, so as to better ensure the quality of the product. Cold rolled pickling surface titanium coil is generally used in aerospace, industry and marine engineering. Compared with the former, cold rolled glossy titanium coil is more widely used. Similarly, there are two more steps in the production process of cold rolled titanium coil with glossy surface than pickling surface: degreasing annealing and straightening.
Because of the poor thermal conductivity of pure titanium, the emulsion with good lubrication effect and excellent cooling performance is required in the rolling process, and the rolling speed should not be too fast, in order to prevent the high temperature of pure titanium and cause the phenomenon of “sticking roller”, and “sticking roller” resulting in rough surface of titanium and poor quality. The residual water and oil on the surface of the titanium strip decompose during the annealing process, which affects the partial pressure of oxygen in the furnace and causes the decomposition reaction to go in the opposite direction, forming oxidation on the surface of the titanium strip and affecting the annealing quality. Because titanium strip annealing before full degreasing cleaning and drying plate surface. The degreasing speed of titanium strip is generally 20m/min, and the speed is adjusted according to the surface quality of the titanium strip after degreasing. Straightening is to ensure the flatness of the product plate.
Product parameters
Ürün | Şartname(Mm} | Derece | Standart | Çekme Dayanımı | Akma dayanımı | Uzama |
pickling surface | Genişlik(1.0~4.0) x (50~1200) x L | GR1/
GR2/ GR3/ GR4 |
ASTM B265 ASME SB265 |
≥240/
≥345/ ≥450/ ≥550 |
138~310/
275~450/ 380~550/ 483~655 |
≥24/
≥20/ ≥18/ ≥15 |
glossy surface | Genişlik(0.2~3.0) x (50~1200) x L |
The titanium coil is mainly used as a container for heating and cooling. titanium coil fixation is divided into two kinds of detachable and non-detachable, This depends on the medium's corrosion of the titanium coil. But mainly based on removable type, convenient maintenance and cleaning of titanium coil.
Application features
Excellent corrosion resistance in many media
Smooth surface, clean layer
Düşük yoğunluklu, high strength and light weight
Düşük yoğunluklu, high specific strength
The density of metallic titanium is 4.51g/cm3, which is higher than that of aluminum and lower than that of steel, bakır, and nickel, but the specific strength is at the top of the metal.
Korozyon direnci
Titanium is a very active metal with a low equilibrium potential and a high tendency for thermodynamic corrosion in media. Fakat, titanium is actually very stable in many media. Mesela, titanium is resistant to corrosion in media such as oxidative, neutral and weak reducibility. This is because titanium and oxygen have a great affinity. In air or oxygen-containing medium, a dense, strong and inert oxide film is formed on the surface of titanium to protect the titanium matrix from corrosion. Even if it is due to mechanical wear, it will quickly heal or regenerate. This shows that titanium is a metal with a strong tendency to passivation. The oxide film of titanium below the temperature of 315°C always maintains this characteristic.
In order to improve the corrosion resistance of titanium, surface treatment technologies such as oxidation, Galvanik, plasma spraying, ion nitriding, ion implantation, and laser processing have been studied. Titanium oxide film played a role in enhancing protection and obtaining desired corrosion resistance. A series of corrosion-resistant titanium alloys such as titanium-molybdenum, titanium-palladium, and titanium-molybdenum-nickel have been developed to meet the needs of metal materials in the production of sulfuric acid, hydrochloric acid, methylamine solution, high-temperature wet chlorine, and high-temperature chloride. Titanium-32-molybdenum alloys are used in titanium castings. Titanium-0.3 molibden-0.8 nickel alloys are used in environments where crevice corrosion or pitting corrosion frequently occurs. Titanium-0.2palladium alloys were used locally in titanium equipment, and good results were obtained.
Good heat resistance
The new titanium alloy can be used long-term at 600 °C or higher.
Low temperature resistance
Low temperature titanium alloy represented by titanium alloys TA7 (Ti-5Al-2.5Sn), TC4 (Ti-6Al-4V) and Ti-2.5Zr-1.5Mo, etc.Its strength increases with decreasing temperature, but the plasticity changes are not large.It maintains good ductility and toughness at -196-253°C and avoids cold brittleness. It is an ideal material for cryogenic vessels and tanks.
Strong anti-damping performance
After metal titanium is subjected to mechanical vibration and electric vibration, its own vibration decay time is the longest compared with steel and copper metal. The use of this property of titanium can be used as a tuning fork, a medical ultrasonic vibrator vibration element, and an advanced sound speaker vibration film.
Non-magnetic, non-toxic
Titanium is a non-magnetic metal, it will not be magnetized in a large magnetic field, non-toxic and has good compatibility with human tissues and blood, so it is used by the medical community.
Tensile strength is close to its yield strength
This property of titanium shows that the yield strength ratio (tensile strength/yield strength) is high, indicating that the metal titanium material is poor in plastic deformation during forming. Since the ratio of the yield limit of titanium to the elastic modulus is large, the resilience of titanium when molded is large.
Good heat transfer performance
Although the thermal conductivity of titanium metal is lower than that of carbon steel and copper, due to the excellent corrosion resistance of titanium, the wall thickness can be greatly reduced, and the heat exchange mode between the surface and steam is droplet condensation, which reduces the thermal group. Titanium surface without scaling can also reduce the thermal resistance, so that the heat transfer performance of titanium is significantly improved.
Low modulus of elasticity
The modulus of elasticity of titanium is 106.4 GMPa at room temperature, which is only 57% of steel.
Suction performance
Titanium is a chemically very reactive metal that reacts with many elements and compounds at high temperatures. Titanium inhalation mainly refers to reaction with carbon, hydrogen, azot, and oxygen at high temperatures.
Malzeme
Can be divided into: TA1 [Content 99,6], TA2 [Content 99,5], TA9 [Titanium Palladium Alloy], TA10 [Ti-Mo-Ni alloy
Titanium
The density of metallic titanium is 4.51g/cm3, which is higher than that of aluminum and lower than that of steel, bakır, and nickel, but the specific strength is at the top of the metal. Korozyon direnci, titanium is a very active metal, its equilibrium potential is very low, the tendency of thermodynamic corrosion in the medium. Fakat, titanium is actually very stable in many media. Mesela, titanium is resistant to corrosion in media such as oxidative, neutral and weak reducibility. This is because titanium and oxygen have a great affinity. In air or oxygen-containing medium, a dense, strong and inert oxide film is formed on the surface of titanium to protect the titanium matrix from corrosion. Even if it is due to mechanical wear, it will quickly heal or regenerate. This shows that titanium is a metal with a strong tendency to passivation. The oxide film of titanium below the temperature of 315°C always maintains this characteristic. In order to improve the corrosion resistance of titanium, surface treatment technologies such as oxidation, Galvanik, plasma spraying, ion nitriding, ion implantation, and laser processing have been studied. Titanium oxide film played a role in enhancing protection and obtaining desired corrosion resistance. A series of corrosion-resistant titanium alloys such as titanium-molybdenum, titanium-palladium, and titanium-molybdenum-nickel have been developed for the production of sulfuric acid, hydrochloric acid, methylamine solution, high-temperature wet chlorine, and high-temperature chlorides, and for metal materials. Titanium castings use titanium-32 molybdenum alloys. Titanium-0.3 molibden-0.8 nickel alloys are used for crevice corrosion or pitting environments. Titanium-0.2 palladium alloys are used locally for titanium equipment. effect. Good heat resistance The new titanium alloy can be used long-term at 600°C or higher. Low-temperature-resistant titanium alloys such as titanium alloys TA7 (Ti-5Al-2.5Sn), TC4 (Ti-6Al-4V), and Ti-2.5Zr-1.5Mo, ve saire., whose low-temperature titanium alloys increase in strength as the temperature decreases, Plasticity is not great. It maintains good ductility and toughness at -196-253°C and avoids cold brittleness. It is an ideal material for cryogenic vessels and tanks.
İlgili Ürünler
-
Devamını OkuHızlı Görünüm
Paslanmaz Bar
Paslanmaz çelik çubuk stoğu genellikle üretim hattı makineleri için veya dayanıklılığın gerekli olduğu diğer endüstriyel ortamlarda kullanılır. Paslanmaz çelik yuvarlak çubuk tipleri, altıgen gibi birçok farklı şekilde bulunabilir, kare, veya yuvarlak çubuklar. Paslanmaz çubuk stoğu aşındırıcı olmayan bir malzemedir, korozyona dayanıklı, ve dayanıklı. Otomotiv gibi çeşitli endüstrilerde kullanılabilir, Havacı -lık, inşaat, ve üretim.
Paslanmaz çelik çubuk stoğu, sektördeki en kaliteli paslanmaz çelik türüdür. Korozyona ve diğer çevre koşullarına karşı dayanıklı olmalarını sağlayan yüksek kaliteli malzemelerden yapılmıştır. Paslanmaz çubuk stoğu ayrıca diğer paslanmaz çelik türlerinden daha fazla çekme mukavemetine sahiptir.
Paslanmaz çelik yuvarlak çubuk ürünleri veya yuvarlak çubuklar, araba jantları gibi ürünlerin üretiminde yaygın olarak kullanılır, motosiklet jantları, bisiklet jantları, ve daha fazlası. Bu tip çubuklar tipik olarak, daha küçük parçalara bölünebilen yuvarlak çubuklar veya yuvarlak çubuklar oluşturmak için uçlarında bir araya getirmeden önce paslanmaz çelik levhaları uzun borulara yuvarlayarak yapılır
-
Devamını OkuHızlı Görünüm
Bakır Çubuk
Bakır çubuk, bir tür demir dışı metal işleme çubuğudur, daha iyi işleme performansına ve yüksek iletkenliğe sahip. Esas olarak pirinç çubuğa ayrılmıştır (bakır çinko alaşımı, Ucuz), mor bakır çubuk (daha yüksek bakır içeriği).
Pirinç çubuk, bakır ve çinko alaşımından yapılmış çubuk şeklinde bir nesnedir, sarı renginden dolayı adlandırılmıştır. Pirincin erime noktası, içeren 56% Hedef 68% bakır, dir 934 Hedef 967 Derece. Pirinç iyi mekanik özelliklere ve aşınma direncine sahiptir, ve hassas aletler üretmek için kullanılabilir, Gemi parçaları, silah kasaları vb.. Klima borusunda kullanılır, buzdolabı borusu, yağ borusu, Su temini borusu ve her türlü mekanik malzeme, otomotiv senkronizatör dişli halkası, Deniz pompası, supap, yapısal parçalar, sürtünme aksesuarları, ve saire.
Mor bakır çubuk, mor kırmızı renginden dolayı adlandırılmıştır. İyi elektrik iletkenliğine sahiptir, ısı iletimi, korozyon direnci ve işleme özellikleri. Kaynak yapılabilir ve lehimlenebilir. Özellik -lerini: yüksek saflıkta, ince yapı, düşük oksijen içeriği. Gözeneklilik yok, trahom, gevşek, mükemmel elektrik iletkenliği, elektroaşındırma kalıp yüzeyinin yüksek hassasiyeti, ısıl işlem sonrası, elektrotun yönü yok, ince oyun için uygun, iyi oyun, iyi termoelektrik kanal ile, işlenebilirlik, süneklik, korozyon direnci ve hava direnci.
-
Devamını OkuHızlı Görünüm
Titanyum Folyo
Titanyum folyo bir titanyum plakadır, şerit, kalınlığı 0,2 mm'ye eşit veya daha az olan rulo veya levha. Haddelenmiş titanyum folyonun maksimum genişliği yaklaşık 600 mm'dir.
Titanyum folyonun genişliği kullanıcının gereksinimlerine göre kesilir. Ancak üretim ne kadar genişse,, verimlilik ne kadar yüksek olursa.
Titanyum folyo esas olarak havacılıkta kullanılır, Gezinti, nükleer enerji, elektronik, kimya endüstrisi, petrol, Hassas üretim, Tıbbi, farmasötik ve diğer hususlar. -
Devamını OkuHızlı Görünüm
Titanyum Şerit
Titanyum şerit Titanyum levha. Genellikle titanyum levhayı birkaç kez tavlama ile küçük bir değirmen tarafından soğuk haddelenir, daha sonra müşteri gereksinimlerine göre titanyum şeritlere kesme kesme. Gelişmiş ekipman, haddeleme işlemi, Proses kontrolü, tavlama sıcaklığı ve geri dönüş süresi kontrolü, pürüzsüzlüğünü ve bitişini sağladı, ürünlerimizin kalitesini etkili bir şekilde geliştirdi.
-
Devamını OkuHızlı Görünüm
Bakır Bobinler
Bir bakır bobin, sarılabilen ve kullanıma sokulabilen basit bir sarmal tel parçası gibi görünebilir. Her türlü endüstriyel üründe olduğu gibi, Bakır bobinler bir uygulamaya uyacak şekilde hassas bir şekilde tasarlanmalıdır. Sargı işlemi, teller ile açıklığın çapı arasındaki uygun mesafeyi sağlamak için hassas bir şekilde tamamlanmalıdır.
Bakır bobinler kullanan her ürün, doğru miktarda direnç sağlamak için belirli sayıda dönüş yapılmasını gerektirir. Yanlış hesaplamalar verimsizliğe ve bobin veya cihazın olası arızalanmasına neden olabilir. Bu nedenle, Metal Associates'teki mühendisler, bir uygulamanın spesifikasyonunu yakından incelediklerini garanti eder. çap, Aralığı, tel kalınlığı, ve dönüş sayısı, bakır bobinin kullanılacağı ürünün tasarımıyla tam olarak eşleşir.
-
Devamını OkuHızlı Görünüm
Bakır Folyo
Bakır, iyi süneklik gibi olağanüstü özelliklere sahip kırmızımsı kahverengi metalik bir elementtir, süneklik, Isı ve iletkenlik
Saf bakır çok yumuşak ve sünek bir metaldir Gerekli performansı elde etmek için, diğer metallerle alaşım yapabiliriz Pirinç ve bronz yaygın olarak kullanılan bakır alaşımlarıdır
Bakır folyo, sıcak haddeleme ve soğuk haddeleme ile bakır veya bakır alaşımından yapılır Bakır folyonun kalınlığı 0,03 mm ila 0,2 mm arasında değişir, ve genişlik ve uzunluk müşteri ihtiyaçlarına göre özelleştirilebilir
-
Devamını OkuHızlı Görünüm
Stainless Steel Strips
Hot Rolled Stainless Steel Strips are produced from hot rolling billets or slabs and then use a cold rolling process. These processes improve strips mechanical properties such as stiffness coefficient and flexibility. Cold Rolled Stainless Steel Strips are obtained from annealed and pickled by cold rolling on polished rolls. As per the required thickness, cold rolling requires a number of passes through mill to effect reduction.
Tedarik ediyoruz SS Strips in various industries including food industries, kimyasal, elektrikli, generator, shaft, cement & gas industries. The offered these Stainless Steel Strips in standards as well as customized dimensions as per the client’s requirement.
-
Devamını OkuHızlı Görünüm
Bakır Levha
Bakır sac çok işlenebilir ve dövülebilir bir metal şeklidir, yüksek elektrik ve ısı iletkenliği, ve mükemmel korozyon direnci sağlar. Güzel ve çok yönlü bir metal, Bakır binlerce yıldır kullanılmaktadır. Tarihsel, Alet yapımında favori bir seçim olarak hizmet etti, Gemi, ve heykeller. Bakır ayrıca güzel patinaları ile de bilinir. Maruz kaldığında, mühürsüz, dış ortama, bakır oksitlenmeye başlar. Bu pozlama, patine şeklinde güzel renk varyasyonları yaratır. Patina'nın renklendirilmesi, metali bozulmaya karşı korumaya hizmet ederken zamanla karakteri değiştirecek ve geliştirecektir. İnsanlar ayrıca, süreci hızlandıran ve bir patinanın dış mekana maruz kalmadan gelişmesine izin veren kimyasal karışımların kullanımıyla hızlı bir şekilde bir patine oluşturacaktır. Bakır levhalar da dövülebilir, aletli, veya ilave doku ve dekoratif veya işlevsel çekicilik için kabartmalı ve çok ince bakır folyodan kalın bakır levhaya kadar birçok kalınlıkta gelir. Ayrıca diğer metalleri bakırla harmanlayan birçok alaşımda bulunur. Grand Copper şirketinde, satıyoruz saf bakır -C110 (Diğer alaşımlar ve temperler talep üzerine temin edilebilir). Bu yüksek saflık, çok çeşitli endüstrilerdeki ve kullanımlardaki projeler ve uygulamalar için gereken üstün kaliteyi sağlar. En iyi malzemeyi sunmaktan gurur duyuyoruz. Yüksek kalitemiz, uygun fiyatlı malzeme ve dost canlısı, Birinci sınıf müşteri hizmetleri bizi on yıldan fazla bir süredir sektörde lider yapmıştır.
-
Devamını OkuHızlı Görünüm
Alüminyum Şerit
Alüminyum levha & kalınlığında rulo şeklinde folyo > 0.2Mm, 20 mm'den 100 mm'ye kadar bir genişliğe genellikle alüminyum şerit denir. Küçük şerit genişliklerinde üretilen alüminyum şeridin ortak adı genellikle bölünmüş şerittir. Alüminyum levhalar, takımların dililmesi ile gerekli olacak şekilde kesilir, Alüminyum şeridin hammaddesi saf alüminyum veya alüminyum alaşımı, sıcak haddelenmiş döküm haddeleme alüminyum bobin ve sıcak haddelenmiş bobindir. Haddeleme sacının ve alüminyum bobinin farklı kalınlık ve genişliklerini oluşturmak için soğuk haddelenmiş bir makine aracılığıyla, ve daha sonra şeridin farklı genişlikleri için dikey kesme ve dilme makinesi. Ve kalınlık<0.2mm, Buna alüminyum folyo şerit veya alüminyum folyo bobini diyoruz.
-
Devamını OkuHızlı Görünüm
Titanyum Levha
Titanyum plaka yüksek korozyon direncine ve spesifik mukavemete sahiptir, ve elektrik gücünde yaygın olarak kullanılmaktadır, kimya endüstrisi, havacılık parçaları, yapı malzemeleri, spor malzemeleri, tıbbi ve diğer alanlar ve hala genişliyor. Kullanım ve üretim teknolojisi açısından, Titanyum plaka düşük fiyata sahip, yüksek performans, çoklu fonksiyonlar, ve kolay üretim.
Herhangi bir sorunuz varsa,lütfen iletişime geçmekten çekinmeyin sales@grandsteeltube.com
- DIN2391 Hassas Çelik Boru
- EN10305-1/4 Hassas Çelik Boru
- EN10305-2/3/5/6 Hassas Tüpler
- SAE Serisi Hassas Borular
- ISO8535-1 Yakıt Enjeksiyon Tüpü
- Tek/Doulbe Duvar Bundy Tüp
- Kazan & Basınçlı Çelik Borular
- Dikişsiz Honlu / SRB Çelik Boru
- Paslanmaz Kılcal Çelik Borular
- Dikişsiz Paslanmaz Borular & Boru
- Kaynaklı Paslanmaz Borular & Boru
- Enjeksiyon & Kontrol Hattı Tüpleri
- Nikel Alaşımlı Borular & Boru
- Demir Dışı Kılcal Borular
- Alüminyum Borular & Boru
- Pirinç Borular & Boru
- Bakır Borular & Boru
- Titanyum Tüpler & Boru
- Ekstrüde / Kaynaklı Fin Borusu
- Demir Dışı Hassas Tüp
- Özel Şekilli Çelik Borular
- Metalik Bobin/Folyo/Levha/Şerit