스테인레스 스틸 스트립 전기 저항과 같은 전자기 특성을 제공하는 오스테나이트계 크롬-니켈-망간 스테인리스강입니다, 자기 투과성 & 전기 전도도 및 Young's Modulus of Elasticity. 우리는 스테인레스 스틸과 같은 다양한 재료 등급의 이러한 스테인레스 스틸 스트립을 제공합니다 304 스트립, 스테인리스 310 스트립, 스테인리스 316 스트립, 스테인리스 904 스트립 및 더 많은.
티타늄 호일
티타늄 호일은 티타늄 판입니다., 박, 두께가 0.2mm 이하인 롤 또는 시트. 압연 티타늄 호일의 최대 너비는 약 600mm입니다..
티타늄 호일의 너비는 사용자의 요구 사항에 따라 절단됩니다. 그러나 제조 범위가 넓을수록, 생산성이 높을수록.
티타늄 호일은 주로 항공 우주에 사용됩니다., 항행, 원자력, 전자공학, 화학 산업, 석유, 정밀 제조, 의학 약제와 다른 양상.
- 묘사
- 사양
- 문의
Titanium foil – Preparation Method
The raw material for industrially producing titanium is mainly rutile ore or high titanium slag (containing 92% or more of Ti02). Titanium sponge production process is based on high titanium slag and petroleum coke as raw material for the production of titanium tetrachloride. Titanium sponge can be obtained by reducing refined titanium tetrachloride with magnesium or sodium in a rare gas stream.
Magnesium reduction distillation method: the proportion of high titanium slag and petroleum coke is 100 (30~33), and the mixture is broken to less than 160 mesh, and sent to the fluidized bed chlorination furnace, and the chlorine gas is passed through the bottom of the furnace, uniformly enter the reaction section of the furnace body, and react with the mixed material of high titanium slag and petroleum coke. The reaction temperature was about 850 °c. The generated titanium tetrachloride gas is discharged from the top of the furnace and enters two separator dust collectors connected in series, so that high boiling points such as iron trichloride, iron dichloride, manganese dichloride and aluminum trichloride mixed in the titanium tetrachloride gas are deposited at the bottom of the separator dust collector. The gas was reintroduced into the two sets of condensers connected in series, and the titanium tetrachloride gas was cooled to below 136 ° C. To obtain a crude titanium tetrachloride solution. The low-boiling matters, such as silicon tetrachloride, therein are distilled off by means of a float valve column distillation. After heating to 140 ° C. In a copper chip Tower, the gasified titanium tetrachloride is passed into a copper chip Tower, and the contained impurity vanadyl trichloride is reduced by copper to a low-valent chloride of vanadium. The purified titanium tetrachloride gas discharged from the top of the column was subjected to a reduction reaction with magnesium in a rare gas stream at about 900 ° C. To obtain titanium sponge. Since the resulting sponge-like titanium also contains magnesium chloride as a by-product and unreacted magnesium, the sponge-like titanium must be placed under a vacuum of 0.1 받는 사람 10-3 Pa, the impurities were separated from the titanium by heating to about 1000 °c.
Titanium foil – Use
titanium alloy has high strength, a large number of structural materials used in the manufacture of military supersonic aircraft, compression Components of jet engines, components of aircraft frames, housings, fire barriers, rivets, structural components of air transport equipment, there is a “space metal”; Military facilities and military ships armored plate and propeller blades. In the civilian industry, titanium and its alloys can be used in the manufacture of various pumps, 밸브, filtration, evaporation equipment wire mesh and various machine parts. Powdered titanium can be used as an oxygen scavenger in the electron tube manufacturing process.
Titanium foil – Safety
hazard code: flammable solid. GB4.1 class 41505. UN NO.2678 (strontium powder). IMDG CODE P. 4177, Class 4.1. Each batch of product should be divided into galvanized iron barrels lined with plastic film, and the weight of each (piece) of the drum is 70~250, and it is sealed with a large open cover. Magnesium reduction titanium must be evacuated and filled with argon in the barrel after packaging. Titanium can be protected without argon by sodium reduction. “Moisture-proof” shall be indicated on the outside of the packaging barrel. Should be stored in a ventilated, dry warehouse. Shall not be stacked in the open air, and shall not be mixed with acid, alkali and other corrosive substances. During the transport process, it is necessary to prevent rain and humidity. During loading and unloading, care should be taken to prevent breakage of the packaging barrel. Titanium tetrachloride used in the production process can make people suffering from chronic bronchitis, chronic hypertrophic rhinitis, pharyngitis. Autonomic nervous system dysfunction, increased tendon reflexes, tremor of the eyelids and hands, hyperhidrosis. Thermal burns were more difficult to heal when exposed to 10% titanium tetrachloride solution. When exposed to titanium tetrachloride smoke, wear an industrial filter gas mask. To protect the eyes and skin. If you accidentally spatter on the skin, wipe it off with cotton gauze and then wash it thoroughly with water. Production equipment should be closed and the workshop should be well ventilated. Dry powder and dry sand can be used to put out the fire, and water, foam and carbon dioxide are strictly prohibited. In case of high heat or intense combustion, explosion may be caused by water suppression.
티타늄 호일은 티타늄 판입니다., 박, 두께가 0.2mm 이하인 롤 또는 시트. 압연 티타늄 호일의 최대 너비는 약 600mm입니다..
티타늄 호일의 너비는 사용자의 요구 사항에 따라 절단됩니다. 그러나 제조 범위가 넓을수록, 생산성이 높을수록.
티타늄 호일은 주로 항공 우주에 사용됩니다., 항행, 원자력, 전자공학, 화학 산업, 석유, 정밀 제조, 의학 약제와 다른 양상.
Titanium alloy has high strength and low density, good mechanical properties, good toughness and corrosion resistance.
The two most prominent advantages of titanium are high specific strength and strong corrosion resistance, which determines that titanium must have broad application prospects in aerospace, weaponry, energy, 화학, 야 금 술, construction and transportation. The rich reserves provide a resource base for the wide application of titanium.
묘사 | Titanium foil |
재료 | Gr1, Gr2 (2 그램), Gr3,Gr4,Gr5, Gr7 시리즈, Gr6,Gr9, Gr11 시리즈, Gr12 시리즈 ,Gr16, Gr17,Gr25TA0,TA1,TA2,TA5,TA6,TA7,TA9,TA10,TB2,TC1,TC2,TC3,TC4 |
표준 | ASTM B265,ASME SB265,DIN17851,TiA16Zr5Mo1.5,JIS4100-2007,GB3461-2007 |
크기 | 두께:0.05-0.2mmWidth:3-600밀리미터
길이:according to requirements |
MOQ | 100 Kilogram/Kilogrames |
Equepment used | CNC lathes, Milling machine, Machining Center,Thread rolling machine Magnetic needle polishing machine |
기능 | 1.high corrosion resistance2.low density
3.non-ferromagnetic 4.good biocompatibility |
패키지 | Standard export package,suit for all kinds of transport ,또는 필요에 따라. |
신청 | 1.Based on High intensity,titanium products tensile strength can be up to 180Kg/mm².2.Titanium and titanium alloy in aviation industry, is called “space metal”; 또한,
in the shipbuilding industry, 화학 산업, manufacturing machinery parts, telecommunications equipment, hard alloy, etc have increasingly extensive application 3.또한, because of the titanium alloy with the human body has very good compatibility, so the titanium alloy can also be artificial bone. |
화학 성분:
구성 (%) | C | N | 철 | O | H | Al | V | 티타늄 |
GR1 | ≤0.08 | ≤0.03 | ≤0.20 | ≤0.18 | ≤0.015 | – | – | Bal. |
GR2 | ≤0.08 | ≤0.03 | ≤0.30 | ≤0.25 | ≤0.015 | – | – | Bal. |
GR5 | ≤0.10 | ≤0.05 | ≤0.30 | ≤0.20 | ≤0.015 | 5.50-6.80 | 3.50-4.50 | Bal. |
기능
|
The density of titanium is 4.506-4.516g/cm^3, melting point is 1668, boiling point is 3535. Therefore Titanium have low
weight,excellent high strength and nonmagnetic festures, low density, excellent corrosion resistance features, high specific strength and high temperature resistance features, so it is widely used in chemical industry field, medical field, 전자공학 manufacture, mechanical parts field, automobile industry, and aerospace field, 등. |
관련 상품
-
더 읽어보기빠른 보기
황동 코일
Brass coil has excellent plasticity (best in brass) and high strength, good machinability, easy to weld, very stable to general corrosion, but prone to corrosion cracking; brass coil is copper and the alloy of zinc is named for its yellow color.
The mechanical properties and wear resistance of the brass coil are very good, 정밀 기기를 제조하는 데 사용할 수 있습니다., 선박 부품, shells of guns, 등. Brass knocks up and sounds good, so instruments such as cymbals, cymbals, bells, and numbers are made of brass. According to the chemical composition, brass is divided into ordinary copper and special brass.
-
더 읽어보기빠른 보기
스테인레스 스틸 호일
스테인레스 스틸 호일은 스테인레스 스틸의 얇은 스트립입니다. 0.2 mm 두께 및 미만 300 폭 mm.
스테인레스 스틸 호일은 다양한 이점을 제공합니다, 화학적 안정성 포함, 높은 강도 대 중량 비율, 전기 절연성 및 내식성.
스테인레스 스틸 호일은 열교환 기 생산에 사용됩니다, 커패시터 및 연료 전지; 뿐만 아니라 의료 장비 및 식품 가공 기계.
스테인레스 스틸 호일은 많은 장점이 있는 다재다능한 재료입니다. 그것의 높은 내식성, 우수한 열 및 전기 전도성과 연성으로 인해 광범위한 응용 분야에 탁월한 선택입니다.
스테인레스 스틸 호일은 여러 등급으로 제공됩니다. 여기에는 오스테나이트계 계열이 포함됩니다, 페라이트 시리즈, 마르텐사이트 계열, 듀플렉스 및 슈퍼 듀플렉스 시리즈. 각 등급에는 호일의 특성에 기여하는 다양한 합금 원소가 있습니다.
스테인리스 스틸 호일의 가장 일반적인 등급은 다음과 같습니다. 304 그리고 316. 이 등급은 0.009mm에서 0.3mm 범위의 두께로 공급됩니다. 다음을 포함하여 다른 등급의 스테인리스 스틸 호일도 요청 시 제공됩니다. 409, 430 및 이중 2205.
-
더 읽어보기빠른 보기
스테인레스 스틸 스트립
열간 압연 스테인레스 스틸 스트립 열간 압연 빌렛 또는 슬래브에서 생산된 다음 냉간 압연 공정을 사용합니다.. 이러한 공정은 강성, 계수 및 유연성과 같은 스트립 기계적 특성을 향상시킵니다.. 냉간 압연 스테인레스 스틸 스트립 어닐링에서 얻어지고 광택 롤에서 냉간 압연에 의해 산세됩니다. 필요한 두께에 따라, 냉간 압연은 감소에 영향을 미치기 위해 밀을 통과하는 횟수가 필요합니다.
우리는 공급합니다 SS 스트립 식품 산업을 포함한 다양한 산업 분야에서, 화학, 전기의, 발생기, 샤프트, 시멘트 & 가스 산업. 이 스테인레스 스틸 스트립을 표준으로 제공하고 고객의 요구 사항에 따라 맞춤형 치수를 제공했습니다.
-
더 읽어보기빠른 보기
스테인레스 스틸 코일
스테인레스 스틸 코일은 다양한 생산 공정에 따라 냉간 압연 스테인레스 스틸 코일과 열간 압연 스테인레스 스틸 코일로 나눌 수 있습니다.
자료에 따르면, 그들은 오스테 나이트로 나눌 수 있습니다, 마르텐사이트, 페라이트 및 듀플렉스.
일반적으로 사용되는 스테인레스 스틸 코일 등급은 종종 디지털 기호로 표시됩니다.
있다 200 시리즈, 300 시리즈, 400 시리즈와 이중 시리즈.
304, 304L, 316 그리고 316L 스테인레스 스틸 코일은 가장 인기 있고 경제적인 스테인리스 스틸 등급입니다.
스테인레스 스틸 304 / 304L 코일 및 스테인레스 스틸 316 / 316L 코일, 듀플렉스 스테인레스 스틸 코일과 함께 많은 화학 환경과 해양 및 산업 노출에 우수한 내식성을 제공합니다..
-
더 읽어보기빠른 보기
티타늄 스트립
티타늄 스트립은 다음에서 생산됩니다. 티타늄 시트. 일반적으로 여러 번 어닐링하는 작은 공장으로 티타늄 시트를 냉간 압연합니다., 그런 다음 고객 요구 사항에 따라 티타늄 스트립으로 전단을 슬리 팅. 진보된 장비, 압연 공정, 공정 제어, 어닐링 온도 및 복귀 시간 제어로 부드러움과 마감이 보장되었습니다., 제품의 품질을 효과적으로 향상시켰습니다..
-
더 읽어보기빠른 보기
알루미늄 스트립
알루미늄 시트 & 두께의 롤 형태의 호일 > 0.2밀리미터, 폭 20mm에서 100mm는 일반적으로 알루미늄 스트립이라고 합니다.. 작은 스트립 너비로 생산되는 알루미늄 스트립의 일반적인 이름은 일반적으로 분할 스트립입니다. 알루미늄 시트는 슬리팅 툴링에 의해 필수로 절단됩니다., 알루미늄 스트립의 원료는 순수 알루미늄 또는 알루미늄 합금, 열간 압연 주조 압연 알루미늄 코일 및 열간 압연 코일입니다. 압연 기계와 알루미늄 코일의 두께와 너비가 다른 것을 형성하기 위해 냉간 압연 기계를 통해, 그리고 그 때 지구의 다른 폭을 위한 수직 절단 그리고 째는 기계. 그리고 두께 < 0.2mm, 우리는 그것을 알루미늄 호일 스트립 또는 알루미늄 호일 코일이라고 부릅니다.
-
더 읽어보기빠른 보기
동박
구리는 우수한 연성과 같은 뛰어난 특성을 가진 적갈색 금속 원소입니다, 연성, 열과 전도도
순수한 구리는 매우 부드럽고 연성이 있는 금속으로 필요한 성능을 달성합니다., 우리는 다른 금속과 합금할 수 있습니다 황동과 청동은 널리 사용되는 구리 합금입니다.
동박은 열간 압연 및 냉간 압연에 의해 구리 또는 구리 합금으로 만들어지며 동박의 두께는 0.03mm에서 0.2mm입니다, 그리고 폭과 길이는 고객 요구에 따라 주문을 받아서 만들어질 수 있습니다
-
더 읽어보기빠른 보기
알루미늄 호일
알루미늄 호일 두께가 0.2mm 미만인 얇은 금속 잎으로 준비된 알루미늄입니다. (7.9 밀); 더 얇은 게이지 4 마이크로미터도 일반적으로 사용됩니다. 표준 가정용 호일은 일반적으로 0.016 밀리미터 (0.63 밀) 두꺼운, 그리고 튼튼한 가정용 호일은 일반적으로 0.024 밀리미터 (0.94 밀). 그리고 에어컨 호일은 0.0047mm보다 얇을 수 있습니다., 그리고 0.002mm보다 얇은 일부 식품 호일. 호일은 유연하며 쉽게 구부리거나 물체를 감쌀 수 있습니다. 얇은 호일은 깨지기 쉬우며 때로는 플라스틱이나 종이와 같은 다른 재료와 라미네이팅되어 더 강하고 유용합니다. 다양한 목적으로 산업적으로 사용됩니다, 패킹을 포함하여, 단열재 및 운송. 집에, 사람들은 식품 저장을 위해 알루미늄 호일을 사용합니다., 베이킹 표면을 덮고 음식을 포장하기 위해, 고기와 같은, 요리하는 동안 수분을 잃지 않도록.
-
더 읽어보기빠른 보기
구리 막대
구리 막대는 비철금속 가공 막대기의 일종입니다, 더 나은 처리 성능과 높은 전도성을 가지고 있습니다.. 그것은 금관 악기 막대로 주로 분할됩니다 (구리 아연 합금, 저렴), 보라색 구리 막대 (더 높은 구리 함량).
황동 막대는 구리와 아연 합금으로 만들어진 막대 모양의 물체입니다, 노란색의 이름을 따서 명명되었습니다. 놋쇠의 녹는점, 여기에는 다음이 포함됩니다. 56% 받는 사람 68% 구리, 다음과 같음 934 받는 사람 967 도. 황동은 우수한 기계적 특성과 내마모성을 가지고 있습니다., 정밀 기기를 제조하는 데 사용할 수 있습니다., 선박 부품, 총 케이스 등. 공기조화 관에서 사용하는, 냉장고 파이프, 송유관, 급수관 및 모든 종류의 기계 재료, 자동차 싱크로나이저 기어 링, 선박용 펌프, 판, 구조상 부속, 마찰 부속품, 등.
보라색 구리 막대는 보라색 빨간색의 이름을 따서 명명되었습니다.. 그것은 좋은 전기 전도성을 가지고 있습니다, 열전도, 내식성과 가공 재산. 용접 및 납땜이 가능합니다.. 특성: 고순도, 미세한 구조, 낮은 산소 함량. 다공성 없음, 트라코마, 헐렁하다, 우수한 전기 전도성, 전동 에칭 금형 표면의 높은 정밀도, 열처리 공정 후, 전극의 방향 없음, 섬세한 플레이에 적합, 파인 플레이, 좋은 열전 수로로, 가공성, 연성, 내식성과 날씨 저항.
-
더 읽어보기빠른 보기
구리 시트
구리 시트는 매우 작업 가능하고 가단성 있는 형태의 금속입니다, 전기 및 열 전도성이 높음, 우수한 내식성을 제공합니다. 아름답고 다재다능한 금속, 구리는 수천 년 동안 사용되어 왔습니다. 역사적, 그것은 도구를 만드는 데 가장 좋아하는 선택이었습니다, 선박, 그리고 조각품. 구리는 아름다운 파티나로도 유명합니다. 노출되었을 때, 봉인 되지 않은, 실외 환경으로, 구리가 산화되기 시작한다. 이 노출은 녹청 형태로 아름다운 색상 변화를 만듭니다. 녹청의 착색은 시간이 지남에 따라 특성이 변하고 발전하며 금속이 열화되지 않도록 보호하는 역할을 합니다. 사람들은 또한 공정 속도를 높이고 실외 노출 없이 녹청이 발달할 수 있도록 하는 화학 혼합물을 사용하여 녹청을 빠르게 생성합니다. 구리 시트도 망치로 두드릴 수 있습니다, 공구, 또는 질감과 장식 또는 기능적 매력을 더하기 위해 엠보싱 처리되며 매우 얇은 동박에서 두꺼운 동판에 이르기까지 다양한 두께로 제공됩니다.. 또한 다른 금속과 구리를 혼합하는 많은 합금으로 제공됩니다. 그랜드 코퍼에서, 우리는 판매합니다 순수 구리 -씨110 (다른 합금 및 템퍼는 요청시 제공됩니다.). 이 고순도는 다양한 산업 및 용도의 프로젝트 및 응용 분야에 필요한 프리미엄 품질을 제공합니다. 우리는 최고의 재료를 제공하는 데 자부심을 느낍니다.. 우리의 고품질, 저렴한 재료와 친절한, 일류 고객 서비스는 우리를 10년 넘게 업계의 리더로 만들었습니다.
- DIN2391 정밀 스틸 튜브
- EN10305-1/4 정밀 스틸 튜브
- EN10305-2/3/5/6 정밀 튜브
- SAE 시리즈 정밀 튜브
- ISO8535-1 연료 분사 튜브
- 싱글/둘베 월 번디 튜브
- 보일러 & 압력 스틸 튜브
- 원활한 연마/SRB 스틸 튜브
- 스테인리스 모세관 스틸 튜브
- 원활한 스테인리스 튜브 & 파이프
- 용접 스테인레스 튜브 & 파이프
- 주사 & 제어 라인 튜브
- 니켈 합금 튜브 & 파이프
- 비철 모세관
- 알루미늄 튜브 & 파이프
- 황동 튜브 & 파이프
- 구리 튜브 & 파이프
- 티타늄 튜브 & 파이프
- 압출/용접 핀 튜브
- 비철 정밀 튜브
- 특수 모양의 스틸 튜브
- 금속 코일/호일/시트/스트립