스테인레스 스틸 스트립 전기 저항과 같은 전자기 특성을 제공하는 오스테나이트계 크롬-니켈-망간 스테인리스강입니다, 자기 투과성 & 전기 전도도 및 Young's Modulus of Elasticity. 우리는 스테인레스 스틸과 같은 다양한 재료 등급의 이러한 스테인레스 스틸 스트립을 제공합니다 304 스트립, 스테인리스 310 스트립, 스테인리스 316 스트립, 스테인리스 904 스트립 및 더 많은.
Titanium coils
Because of the poor thermal conductivity of pure titanium, the emulsion with good lubrication effect and excellent cooling performance is required in the rolling process, and the rolling speed should not be too fast, in order to prevent the high temperature of pure titanium and cause the phenomenon of “sticking roller”, and “sticking roller” resulting in rough surface of titanium and poor quality. The residual water and oil on the surface of the titanium strip decompose during the annealing process, which affects the partial pressure of oxygen in the furnace and causes the decomposition reaction to go in the opposite direction, forming oxidation on the surface of the titanium strip and affecting the annealing quality. Because titanium strip annealing before full degreasing cleaning and drying plate surface. The degreasing speed of titanium strip is generally 20m/min, and the speed is adjusted according to the surface quality of the titanium strip after degreasing. Straightening is to ensure the flatness of the product plate.
- 묘사
- 사양
- 문의
Manufacturing process
Cold rolled titanium coil due to different production processes (or finished product surface) generally divided into cold rolled pickling surface titanium coil and cold rolled glossy titanium coil.
The manufacturing process of cold rolled pickling surface titanium coil of XRUN is: sponge titanium — melting — forging — 열간 압연 — 열처리 — shot blasting — hot rolled pickling white roll — 냉간 압연 — 열처리 — shot blasting — pickling — edge cutting — inspection — cold rolled pickling white roll — packing and storage.
production process
In the production process, because the product is rolled twice, the oxide scale will be produced. Two heat treatment and shot blasting pickling are the treatment of the oxide scale on the surface of the product, so as to better ensure the quality of the product. Cold rolled pickling surface titanium coil is generally used in aerospace, industry and marine engineering. Compared with the former, cold rolled glossy titanium coil is more widely used. Similarly, there are two more steps in the production process of cold rolled titanium coil with glossy surface than pickling surface: degreasing annealing and straightening.
Because of the poor thermal conductivity of pure titanium, the emulsion with good lubrication effect and excellent cooling performance is required in the rolling process, and the rolling speed should not be too fast, in order to prevent the high temperature of pure titanium and cause the phenomenon of “sticking roller”, and “sticking roller” resulting in rough surface of titanium and poor quality. The residual water and oil on the surface of the titanium strip decompose during the annealing process, which affects the partial pressure of oxygen in the furnace and causes the decomposition reaction to go in the opposite direction, forming oxidation on the surface of the titanium strip and affecting the annealing quality. Because titanium strip annealing before full degreasing cleaning and drying plate surface. The degreasing speed of titanium strip is generally 20m/min, and the speed is adjusted according to the surface quality of the titanium strip after degreasing. Straightening is to ensure the flatness of the product plate.
Product parameters
제품 | 사양(밀리미터} | 급 | 표준 | 인장 강도 | 항복 강도 | 신장 |
pickling surface | 너비(1.0~4.0) x (50~1200) x L | GR1/
GR2/ GR3/ GR4 |
ASTM B265 ASME SB265 |
≥240/
≥345/ ≥450/ ≥550 |
138~310/
275~450/ 380~550/ 483~655 |
≥24/
≥20/ ≥18/ ≥15 |
glossy surface | 너비(0.2~3.0) x (50~1200) x L |
The titanium coil is mainly used as a container for heating and cooling. titanium coil fixation is divided into two kinds of detachable and non-detachable, This depends on the medium's corrosion of the titanium coil. But mainly based on removable type, convenient maintenance and cleaning of titanium coil.
Application features
Excellent corrosion resistance in many media
Smooth surface, clean layer
저밀도, high strength and light weight
저밀도, 높은 비강도
The density of metallic titanium is 4.51g/cm3, which is higher than that of aluminum and lower than that of steel, 구리, and nickel, but the specific strength is at the top of the metal.
내식성
Titanium is a very active metal with a low equilibrium potential and a high tendency for thermodynamic corrosion in media. 그렇지만, titanium is actually very stable in many media. 예를 들어, titanium is resistant to corrosion in media such as oxidative, neutral and weak reducibility. This is because titanium and oxygen have a great affinity. In air or oxygen-containing medium, a dense, strong and inert oxide film is formed on the surface of titanium to protect the titanium matrix from corrosion. Even if it is due to mechanical wear, it will quickly heal or regenerate. This shows that titanium is a metal with a strong tendency to passivation. The oxide film of titanium below the temperature of 315°C always maintains this characteristic.
In order to improve the corrosion resistance of titanium, surface treatment technologies such as oxidation, electroplating, plasma spraying, ion nitriding, ion implantation, and laser processing have been studied. Titanium oxide film played a role in enhancing protection and obtaining desired corrosion resistance. A series of corrosion-resistant titanium alloys such as titanium-molybdenum, titanium-palladium, and titanium-molybdenum-nickel have been developed to meet the needs of metal materials in the production of sulfuric acid, hydrochloric acid, methylamine solution, high-temperature wet chlorine, and high-temperature chloride. Titanium-32-molybdenum alloys are used in titanium castings. 타이타늄-0.3 molybdenum-0.8 nickel alloys are used in environments where crevice corrosion or pitting corrosion frequently occurs. 타이타늄-0.2palladium alloys were used locally in titanium equipment, and good results were obtained.
Good heat resistance
The new titanium alloy can be used long-term at 600 °C or higher.
Low temperature resistance
Low temperature titanium alloy represented by titanium alloys TA7 (Ti-5Al-2.5Sn), TC4 (Ti-6Al-4V) and Ti-2.5Zr-1.5Mo, etc.Its strength increases with decreasing temperature, but the plasticity changes are not large.It maintains good ductility and toughness at -196-253°C and avoids cold brittleness. It is an ideal material for cryogenic vessels and tanks.
Strong anti-damping performance
After metal titanium is subjected to mechanical vibration and electric vibration, its own vibration decay time is the longest compared with steel and copper metal. The use of this property of titanium can be used as a tuning fork, a medical ultrasonic vibrator vibration element, and an advanced sound speaker vibration film.
Non-magnetic, 무독성
Titanium is a non-magnetic metal, it will not be magnetized in a large magnetic field, non-toxic and has good compatibility with human tissues and blood, so it is used by the medical community.
Tensile strength is close to its yield strength
This property of titanium shows that the yield strength ratio (tensile strength/yield strength) is high, indicating that the metal titanium material is poor in plastic deformation during forming. Since the ratio of the yield limit of titanium to the elastic modulus is large, the resilience of titanium when molded is large.
Good heat transfer performance
Although the thermal conductivity of titanium metal is lower than that of carbon steel and copper, due to the excellent corrosion resistance of titanium, the wall thickness can be greatly reduced, and the heat exchange mode between the surface and steam is droplet condensation, which reduces the thermal group. Titanium surface without scaling can also reduce the thermal resistance, so that the heat transfer performance of titanium is significantly improved.
Low modulus of elasticity
The modulus of elasticity of titanium is 106.4 GMPa at room temperature, which is only 57% of steel.
Suction performance
Titanium is a chemically very reactive metal that reacts with many elements and compounds at high temperatures. Titanium inhalation mainly refers to reaction with carbon, hydrogen, nitrogen, and oxygen at high temperatures.
자료
Can be divided into: 타1 [Content 99,6], 타2 [Content 99,5], TA9 [Titanium Palladium Alloy], TA10 [Ti-Mo-Ni alloy
타이타늄
The density of metallic titanium is 4.51g/cm3, which is higher than that of aluminum and lower than that of steel, 구리, and nickel, but the specific strength is at the top of the metal. 내식성, titanium is a very active metal, its equilibrium potential is very low, the tendency of thermodynamic corrosion in the medium. 그렇지만, titanium is actually very stable in many media. 예를 들어, titanium is resistant to corrosion in media such as oxidative, neutral and weak reducibility. This is because titanium and oxygen have a great affinity. In air or oxygen-containing medium, a dense, strong and inert oxide film is formed on the surface of titanium to protect the titanium matrix from corrosion. Even if it is due to mechanical wear, it will quickly heal or regenerate. This shows that titanium is a metal with a strong tendency to passivation. The oxide film of titanium below the temperature of 315°C always maintains this characteristic. In order to improve the corrosion resistance of titanium, surface treatment technologies such as oxidation, electroplating, plasma spraying, ion nitriding, ion implantation, and laser processing have been studied. Titanium oxide film played a role in enhancing protection and obtaining desired corrosion resistance. A series of corrosion-resistant titanium alloys such as titanium-molybdenum, titanium-palladium, and titanium-molybdenum-nickel have been developed for the production of sulfuric acid, hydrochloric acid, methylamine solution, high-temperature wet chlorine, and high-temperature chlorides, and for metal materials. Titanium castings use titanium-32 molybdenum alloys. 타이타늄-0.3 molybdenum-0.8 nickel alloys are used for crevice corrosion or pitting environments. 타이타늄-0.2 palladium alloys are used locally for titanium equipment. effect. Good heat resistance The new titanium alloy can be used long-term at 600°C or higher. Low-temperature-resistant titanium alloys such as titanium alloys TA7 (Ti-5Al-2.5Sn), TC4 (Ti-6Al-4V), and Ti-2.5Zr-1.5Mo, 등., whose low-temperature titanium alloys increase in strength as the temperature decreases, Plasticity is not great. It maintains good ductility and toughness at -196-253°C and avoids cold brittleness. It is an ideal material for cryogenic vessels and tanks.
관련 상품
-
더 읽어보기빠른 보기
알루미늄 스트립
알루미늄 시트 & 두께의 롤 형태의 호일 > 0.2밀리미터, 폭 20mm에서 100mm는 일반적으로 알루미늄 스트립이라고 합니다.. 작은 스트립 너비로 생산되는 알루미늄 스트립의 일반적인 이름은 일반적으로 분할 스트립입니다. 알루미늄 시트는 슬리팅 툴링에 의해 필수로 절단됩니다., 알루미늄 스트립의 원료는 순수 알루미늄 또는 알루미늄 합금, 열간 압연 주조 압연 알루미늄 코일 및 열간 압연 코일입니다. 압연 기계와 알루미늄 코일의 두께와 너비가 다른 것을 형성하기 위해 냉간 압연 기계를 통해, 그리고 그 때 지구의 다른 폭을 위한 수직 절단 그리고 째는 기계. 그리고 두께 < 0.2mm, 우리는 그것을 알루미늄 호일 스트립 또는 알루미늄 호일 코일이라고 부릅니다.
-
더 읽어보기빠른 보기
스테인레스 스틸 호일
스테인레스 스틸 호일은 스테인레스 스틸의 얇은 스트립입니다. 0.2 mm 두께 및 미만 300 폭 mm.
스테인레스 스틸 호일은 다양한 이점을 제공합니다, 화학적 안정성 포함, 높은 강도 대 중량 비율, 전기 절연성 및 내식성.
스테인레스 스틸 호일은 열교환 기 생산에 사용됩니다, 커패시터 및 연료 전지; 뿐만 아니라 의료 장비 및 식품 가공 기계.
스테인레스 스틸 호일은 많은 장점이 있는 다재다능한 재료입니다. 그것의 높은 내식성, 우수한 열 및 전기 전도성과 연성으로 인해 광범위한 응용 분야에 탁월한 선택입니다.
스테인레스 스틸 호일은 여러 등급으로 제공됩니다. 여기에는 오스테나이트계 계열이 포함됩니다, 페라이트 시리즈, 마르텐사이트 계열, 듀플렉스 및 슈퍼 듀플렉스 시리즈. 각 등급에는 호일의 특성에 기여하는 다양한 합금 원소가 있습니다.
스테인리스 스틸 호일의 가장 일반적인 등급은 다음과 같습니다. 304 그리고 316. 이 등급은 0.009mm에서 0.3mm 범위의 두께로 공급됩니다. 다음을 포함하여 다른 등급의 스테인리스 스틸 호일도 요청 시 제공됩니다. 409, 430 및 이중 2205.
-
더 읽어보기빠른 보기
알루미늄 코일
알루미늄 코일 압연 제품입니다, 연속 스트립의 코일 형태로 생산됩니다, 내경과 외경을 갖는다. ID는 50mm에서 1000mm까지. 1xxx를 포함한 알루미늄 합금 등급, 2트리플 엑스, 3트리플 엑스, 4트리플 엑스, 5트리플 엑스, 6트리플 엑스, 7트리플 엑스, 8트리플 엑스. 그러나 가장 일반적인 것은 1050, 3003, 6061 그리고 5251 알루미늄 코일. 두께 0.045-80mm, 60-2650mm에서 폭:. 알루미늄 코일의 일반적인 폭은 800mm입니다.,1000밀리미터, 1250밀리미터,1450mm와 1500mm.
여러 산업에서 다양한 응용 분야를 위해 알루미늄 코일에 의존합니다, 자동차와 같은, 건축, 열전달, 약, 전기의, 그리고 식품 산업. 다른 재료에 비해, 알루미늄은 많은 경우에 훨씬 우수한 재료입니다. 알루미늄 코일은 표준 밀 마감으로 공급될 수 있습니다., 또는 솔질할 수 있습니다., 체크 무늬, 컬러 코팅, 새틴 마감 및 양극 산화 처리. 알루미늄 시트 또는 알루미늄 호일은 고객의 요구 사항에 따라 코일로 절단할 수 있습니다..
-
더 읽어보기빠른 보기
티타늄 시트
티타늄 판은 높은 내식성과 비강도를 가지고 있습니다., 그리고 전력에서 널리 이용됩니다, 화학 산업, 항공 부품, 건축 자재, 스포츠 장비, 의료 및 기타 분야로 계속 확장되고 있습니다.. 사용 및 제조 기술의 관점에서, 티타늄 플레이트는 가격이 저렴합니다., 고성능, 여러 기능, 그리고 쉬운 생산.
질문이 있으시면,부담없이 문의해 주세요 sales@grandsteeltube.com
-
더 읽어보기빠른 보기
스테인레스 강판
스테인레스 강판 & 격판덮개 오스테나이트계 강철로 구성되어 있으며 주로 크롬과 니켈을 포함하며 높은 내식성을 제공하는 희귀 원소가 추가되었습니다., 높은 장력 강도, 뛰어난 충격 & 극저온에서의 인성 및 고온 저항. 더욱이, 이 SS 시트 & 플레이트는 화학과 같은 다양한 산업 분야에서 매우 요구됩니다 & 식품 가공, 열교환기, 신선한 & 바닷물 해양 환경, 자동차 등.
-
더 읽어보기빠른 보기
구리 코일
구리 코일은 감아서 사용할 수 있는 단순한 코일 와이어 조각처럼 보일 수 있습니다. 모든 형태의 산업 제품과 마찬가지로, 구리 코일은 애플리케이션에 맞게 정밀하게 설계되어야 합니다. 권선 공정은 전선과 개구부 직경 사이의 적절한 거리를 보장하기 위해 정밀하게 완료되어야 합니다.
구리 코일을 사용하는 각 제품은 정확한 양의 저항을 제공하기 위해 특정 수의 회전을 수행해야 합니다. 부정확한 계산은 비효율성과 코일 또는 장치의 고장으로 이어질 수 있습니다. 이러한 이유로, Metal Associates의 엔지니어는 직경이, 간격, 와이어 굵기, 그리고 회전 수는 구리 코일이 사용될 제품의 설계와 정확히 일치합니다..
-
더 읽어보기빠른 보기
스테인레스 스틸 스트립
열간 압연 스테인레스 스틸 스트립 열간 압연 빌렛 또는 슬래브에서 생산된 다음 냉간 압연 공정을 사용합니다.. 이러한 공정은 강성, 계수 및 유연성과 같은 스트립 기계적 특성을 향상시킵니다.. 냉간 압연 스테인레스 스틸 스트립 어닐링에서 얻어지고 광택 롤에서 냉간 압연에 의해 산세됩니다. 필요한 두께에 따라, 냉간 압연은 감소에 영향을 미치기 위해 밀을 통과하는 횟수가 필요합니다.
우리는 공급합니다 SS 스트립 식품 산업을 포함한 다양한 산업 분야에서, 화학, 전기의, 발생기, 샤프트, 시멘트 & 가스 산업. 이 스테인레스 스틸 스트립을 표준으로 제공하고 고객의 요구 사항에 따라 맞춤형 치수를 제공했습니다.
-
더 읽어보기빠른 보기
스테인레스 스틸 코일
스테인레스 스틸 코일은 다양한 생산 공정에 따라 냉간 압연 스테인레스 스틸 코일과 열간 압연 스테인레스 스틸 코일로 나눌 수 있습니다.
자료에 따르면, 그들은 오스테 나이트로 나눌 수 있습니다, 마르텐사이트, 페라이트 및 듀플렉스.
일반적으로 사용되는 스테인레스 스틸 코일 등급은 종종 디지털 기호로 표시됩니다.
있다 200 시리즈, 300 시리즈, 400 시리즈와 이중 시리즈.
304, 304L, 316 그리고 316L 스테인레스 스틸 코일은 가장 인기 있고 경제적인 스테인리스 스틸 등급입니다.
스테인레스 스틸 304 / 304L 코일 및 스테인레스 스틸 316 / 316L 코일, 듀플렉스 스테인레스 스틸 코일과 함께 많은 화학 환경과 해양 및 산업 노출에 우수한 내식성을 제공합니다..
-
더 읽어보기빠른 보기
놋쇠 막대기
-
더 읽어보기빠른 보기
황동 코일
Brass coil has excellent plasticity (best in brass) and high strength, good machinability, easy to weld, very stable to general corrosion, but prone to corrosion cracking; brass coil is copper and the alloy of zinc is named for its yellow color.
The mechanical properties and wear resistance of the brass coil are very good, 정밀 기기를 제조하는 데 사용할 수 있습니다., 선박 부품, shells of guns, 등. Brass knocks up and sounds good, so instruments such as cymbals, cymbals, bells, and numbers are made of brass. According to the chemical composition, brass is divided into ordinary copper and special brass.
- DIN2391 정밀 스틸 튜브
- EN10305-1/4 정밀 스틸 튜브
- EN10305-2/3/5/6 정밀 튜브
- SAE 시리즈 정밀 튜브
- ISO8535-1 연료 분사 튜브
- 싱글/둘베 월 번디 튜브
- 보일러 & 압력 스틸 튜브
- 원활한 연마/SRB 스틸 튜브
- 스테인리스 모세관 스틸 튜브
- 원활한 스테인리스 튜브 & 파이프
- 용접 스테인레스 튜브 & 파이프
- 주사 & 제어 라인 튜브
- 니켈 합금 튜브 & 파이프
- 비철 모세관
- 알루미늄 튜브 & 파이프
- 황동 튜브 & 파이프
- 구리 튜브 & 파이프
- 티타늄 튜브 & 파이프
- 압출/용접 핀 튜브
- 비철 정밀 튜브
- 특수 모양의 스틸 튜브
- 금속 코일/호일/시트/스트립