SAE J525 Welded & Redrawn Steel Tubes
J525 Hydraulic Tube is welded low-carbon steel tubing annealed for bending and flaring with many uses. Used for pressure lines in applications requiring high-quality tubing for bending, flaring, forming, and brazing. Typical uses include Heavy Equipment, Agriculture, Off-Road Vehicles, Automotive, Steering and Transmission components, Process and Utility, and other Hydraulic applications.
Επιπλέον, the manufacturing process of our J525 high-pressure tubing includes several cold-drawn reductions, intermediate anneals, and then a dead-soft anneal after final sizing. The resulting tubing is consistent of high quality that is easy to bend and flare.
Much like J524, J525 is used in hydraulic applications, both with the same chemical and mechanical properties. The difference is that J525 is welded starting as flat stock. Where flaring is a requirement, J524 Seamless is typically the preferred product. Όμως, both are of high quality and have comparable specifications.
Εάν χρειάζεστε περισσότερες πληροφορίες,παρακαλώ επικοινωνήστε μαζί μας sales@grandsteeltube.com
- Περιγραφή: __________
- Εξέταση
SAE J525 Welded Hydraulic Tubing
J525 Hydraulic Tube is welded low-carbon steel tubing annealed for bending and flaring with many uses. Used for pressure lines in applications requiring high-quality tubing for bending, flaring, forming, and brazing. Typical uses include Heavy Equipment, Agriculture, Off-Road Vehicles, Automotive, Steering and Transmission components, Process and Utility, and other Hydraulic applications.
Επιπλέον, the manufacturing process of our J525 high-pressure tubing includes several cold-drawn reductions, intermediate anneals, and then a dead-soft anneal after final sizing. The resulting tubing is consistent of high quality that is easy to bend and flare.
Much like J524, J525 is used in hydraulic applications, both with the same chemical and mechanical properties. The difference is that J525 is welded starting as flat stock. Where flaring is a requirement, J524 Seamless is typically the preferred product. Όμως, both are of high quality and have comparable specifications.
- SAE J-525
- ASTM A-214 (Except Average Wall)
- ASME SA-214 Except (Average Wall)
- Addenda EN10204 3.1.B
- PED Certified
- OD x ID
- Uniform Lengths
- Dual certified Fluidline
SAE J525 Chemical Composition
Carbon | 0.18 .max |
Manganese | 0.30 προς 0.6 |
Phosphorus | ≤0.040 |
Sulfur | ≤0.050 |
SAE J525 Mechanical Property
Αντοχή διαρροής, min | 170 ΜΜΑ |
Tensile Strength Min | 310 ΜΜΑ |
Elongation Mi | 35% |
Hardness Min | 65 HRB |
SAE J525 Welded & Redrawn Tubing Tolerance
The tubing tolerances The wall thickness shall not vary more than ±10% for tubing having 12.7 mm or larger, nominal inside diameter nor more than ±15% for tubing having a smaller nominal inside diameter. Tubing outside diameter and wall thickness shall be as specified by the purchaser.
Nominal Tubing OD, χιλ. | OD Tolerance, ± mm |
Up to 25.4 | 0.10 |
Over 25.4 to 38.1inclusive | 0.15 |
Πέρα 38.1 to 50.8 inclusive | 0.20 |
Πέρα 50.8 προς 88.9 inclusive | 0.25 |