SAE J524 Seamless Steel Tube
SAE J524 covers cold drawn and annealed seamless low-carbon steel pressure tubing intended used for hydraulic lines and other applications. The J524 Seamless Hydraulic Tubing is especially favorable for flaring and bending, some industrial uses include aircraft, السيارات, locomotive, vehicle, heavy equipment, and agricultural applications. Wiho metals supply and stock a large inventory of SAE J524 seamless tubing for the hydraulic applications and where fittings, couplings, and fluid lines are used. بالإضافة, all of the tubes have an exceptionally bright and clean OD and ID.
إذا كان هناك أي أسئلة,أنت أكثر من موضع ترحيب للاتصال sales@grandsteletube.com
- وصف
- مزايا باوشينغ
- المواصفات
- استخبار
SAE J524 covers cold drawn and annealed seamless low-carbon steel pressure tubing intended used for hydraulic lines and other applications. The J524 Seamless Hydraulic Tubing is especially favorable for flaring and bending, some industrial uses include aircraft, السيارات, locomotive, vehicle, heavy equipment, and agricultural applications. Wiho metals supply and stock a large inventory of SAE J524 seamless tubing for the hydraulic applications and where fittings, couplings, and fluid lines are used. بالإضافة, all of the tubes have an exceptionally bright and clean OD and ID.
SAE J524 Tubing Equivalent Specifications
ASTM /ASME A/SA179 except for average wall, aluminum killed steel
ايسي 1008/1010
EN10204 3.1.B
SAE J524 Chemical Composition
Carbon | 0.18 max |
Manganese | 0.30 ل 0.6 |
Phosphorus | ≤0.040 |
Sulfur | ≤0.050 |
SAE J524 Mechanical Property
قوة العائد, min | 170 MPa |
Tensile Strength Min | 310 MPa |
Elongation Mi | 35% |
Hardness Min | 65 HRB |
SAE J524 Seamless Tubing Tolerance
The tubing tolerances The wall thickness shall not vary more than ±10% for tubing having 12.7 mm or larger, nominal inside diameter nor more than ±15% for tubing having a smaller nominal inside diameter. Tubing outside diameter and wall thickness shall be as specified by the purchaser.
Nominal Tubing OD, المليمتر | OD Tolerance, ± mm |
Up to 25.4 | 0.10 |
Over 25.4 to 38.1inclusive | 0.15 |
Over 38.1 to 50.8 inclusive | 0.20 |
Over 50.8 ل 88.9 inclusive | 0.25 |
1.Production of SAE J524 series seamless high precision tubes since 2005.
2. العمل مع عملاء من أوروبا,غرب آسيا,أمريكا الجنوبية,إلخ منذ ذلك الحين 2006.
3. يمكن تسليم العينات في غضون 25 أيام بعد التأكيد
4. 35 أيام كفترة الإنتاج والتسليم بعد تأكيد الطلب.
5. 150,000 meters of seamless steel tubes in stock.
6. 200 يمكن تقديم الأحجام من OD:4mmxWT:0.5مم إلى التطوير التنظيمي:88.90mmxWT:10المليمتر
7. التفتيش من طرف ثالث مثل:TUV,بي,اس جي اس,إلخ مقبولة
8. فريق محترف يساعد متطلبات الأنبوب الخاصة بك.
9. يمكن تقديم الأنابيب الأخرى ذات الصلة بأسعار تنافسية: DIN2391,EN10305-1/4 seamless steel tubes,EN10305-2/3 welded steel tube;الخ
إذا كان هناك أي أسئلة,أنت أكثر من موضع ترحيب للاتصال sales@grandsteletube.com
The tolerances applicable to tubing outside diameter are shown as follows. The wall thickness shall not vary more than ±10% for tubing having 12.7 mm or larger,nominal inside diameter no more than ±15% for tubing having a smaller nominal inside diameter. Tubing outside diameter and wall thickness shall be as specified by purchaser.
OD Up to 25.4mm OD Tolerance±0.10mm
Over 25.4 ل 38.1 inclusive OD Tolerance±0.15mm
Over 38.1 ل 50.8 inclusive OD Tolerance±0.20mm
Over 50.8 ل 88.9 inclusive OD Tolerance±0.25mm
CHEMICAL REQUIREMENTS Cast or Heat Analysis Element % by Weight
Carbon Manganese Phosphorus Sulfur
0.18 max 0.30 ل 0.60 0.040 max 0.050 max
MECHANICAL PROPERTIES
Yield Strength≥170 MPa, Ultimate Strength, ≥310 MPa, Elongation in 50 المليمتر, ≥35% Hardness (Rockwell B)≤ 65
إذا كان هناك أي أسئلة,أنت أكثر من موضع ترحيب للاتصال sales@grandsteletube.com