Low Carbon Colorful Bundy Tube
- وصف
- Grand's Advantges
- المواصفات
- استخبار
Our workshop,located in Changzhou,covers an area of 13,000 square meters equipped with the state-of-art facilities to manufacture the double wall bundy steel tubes and single wall bundy steel tubes .
The monthly production capacity is 200,000 امتار.
The materials are :SPCC,SPHC,SPCE,BHG1,BHG2,other materials can be achieved after discussion.
Mainly sizes are:4.76×0.70mm,6.35×0.70mm,8×0.70mm,9.53×0.70mm,10×0.70mm,12×0.70mm other size like:4.00×0.5mm,3.18×0.7mm,2.60×0.50mm is also produced according the requirements.other sizes can be achieved after discussion.
We have been delivering these tubes to Peru,فرنسا,Russia,South Korea for the automotive industry,since 2011.etc.If any questions,أنت أكثر من موضع ترحيب للاتصال sales@grandsteeltube.com
1. Production of double wall/single wall bundy steel tubes since 2005.
2. العمل مع عملاء من أوروبا,أمريكا الشمالية,أمريكا الجنوبية,إلخ منذ ذلك الحين 2006.
3. يمكن تسليم العينات في غضون 10 أيام بعد التأكيد
4. 40 أيام كفترة الإنتاج والتسليم بعد تأكيد الطلب.
5. 200,000 meters of copper coated bundy steel tubes in stock.
6. يمكن تقديم الأحجام من OD:2.60mmxWT:0.5مم إلى التطوير التنظيمي:12.7mmxWT:1.24المليمتر
7. التفتيش من طرف ثالث مثل:TUV,بي,اس جي اس,إلخ مقبولة
8. فريق محترف يساعد متطلبات الأنبوب الخاصة بك.
9. Other related tubes can be offered :white/black/olive green galvanized bundy tubes;PVF bundy tube;الخ
إذا كان هناك أي أسئلة,أنت أكثر من موضع ترحيب للاتصال sales@grandsteeltube.com
| Tolerances | |||
| التطوير التنظيمي |
Tolerance
|
سمك الجدار | Tolerance |
| <3/16" (<4.76المليمتر) | ±0.0020" (±0.05mm) | 0.03" (0.7المليمتر) | ±0.0031" (±0.08mm) |
| 3/16"~5/16" (4.76mm~8mm) | ±0.0031" (±0.08mm) | 0.039" (1المليمتر) | ±0.0039" (0.1المليمتر) |
| >5/16" (>8المليمتر) | ±0.0059" (±0.15mm) | ||
| التركيب الكيميائي | |||||||
| Element | C | Si | Mn | P | S | Alt | |
| ‰Max | 0.6 | 0.3 | 3 | 0.3 | 0.3 | 0.2 | |
| Mechanical Properties | |||||||
| Tensile Strength | 42000psi (290MPa) | ||||||
| قوة العائد | 26100psi (180MPa) | ||||||
| استطاله | ≥25% | ||||||
| Expansion | ≥20% | ||||||
| Inside Surface Cleanliness | ≤0.16g/m2 | ||||||
إذا كان هناك أي أسئلة,أنت أكثر من موضع ترحيب للاتصال sales@grandsteeltube.com
منتجات ذات صله
-
إقرأ المزيدعرض سريعWhite Galvanized Bundy Tube
The bundy steel tube has fine inside cleanness, قوة عالية, nice elongation, good foundation for late process , anti leakage, anti high pressure explosion, excellent anti corrosion power after surface treatment. It is an ideal material for tubes of condensation , evaporation and autos.The tube can be provided in coils or cut to length,الخ.Thickness of zinc may reach 8um,12um,15um,20um,25um.إذا كان هناك أي أسئلة,welcome to contact sales@grandsteeltube.com -
إقرأ المزيدعرض سريعBrazed Double Wall Tube for Automobile
Brazed Double Wall Bundy Tubes for automobiles produced by Grand are capable of extending the lifespan of automobiles and satisfy environmental regulations. They have been developed with high corrosion-resistance and are environmental-friendly.
Products manufactured with the latest technologies developed over 15 years are being mainly used in the pipelines of brakes and fuel systems. Outstanding in pressure resistance and mechanical properties, these tubes provide excellent rust-proofing together with high thermal transmission and low inner-fluid resistance.إذا كان هناك أي أسئلة, يرجى الاتصال sales@grandsteeltube.com
-
إقرأ المزيدعرض سريعSteel Zinc Brake Line Fuel Tubing Kit
-
إقرأ المزيدعرض سريعCopper-Nickel Automotive Vehicle Brake Tubing
A vehicle’s braking system is as crucial to a vehicle’s performance as its engine and drive train. The tubing carrying pressurized air or fluid through the system is the vital link between master cylinder and slave cylinders at the wheels.
Brake system tubing is vulnerable to the pressures of air or fluid flowing through it, to corrosion from road mud and salt, and to damage of any protective coatings on its surfaces from stone pecking where it is exposed under the chassis.
Copper-nickel alloy C70600, an alloy of 90% النحاس و 10% nickel, is inherently corrosion resistant to road salt, and its use as brake tubing is increasing based on: 1) Changing life-expectancy for automotive vehicles; 2) Worldwide service-experience data on brake tubing wear; و 3) Increasing cost of corrosion-retarding coatings for steel brake tubing.
إذا كان هناك أي أسئلة, لا تتردد في الاتصال sales@grandsteeltube.com
-
إقرأ المزيدعرض سريعGalfan Coating Bundy Tube
Bundy tube, also called Bundy pipe, is a double wall copper brazed steel tube. The manufacture of Bundy tube is a continuous process of rolling a copper coated steel strip through 720 degrees, brazing the outer and inner circle of the strip together by the melted copper layer to form a round tube with a continuous circular seam, and annealing. We are using fully automatic production lines with online process monitoring and continuous fabrication of the Bundy tubes.The bundy steel tube has fine inside cleanness, قوة عالية, nice elongation, good foundation for late process , anti leakage, anti high pressure explosion, excellent anti corrosion power after surface treatment. It is an ideal material for tubes of automotive industry.The tube can be provided in coils or cut to length,etc.Thickness of copper coating: ≥3umإذا كان هناك أي أسئلة,يرجى الاتصال sales@grandsteeltube.com -
إقرأ المزيدعرض سريعPVF coated bundy steel tube
The bundy steel tube has fine inside cleanness, قوة عالية, nice elongation, good foundation for late process , anti leakage, anti high pressure explosion, excellent anti corrosion power after surface treatment. It is an ideal material for tubes of automotive industry.The tube can be provided in coils or cut to length,الخ.Thickness of PVF coating may reaches: 8μm,12μm,15μm,25μmإذا كان هناك أي أسئلة,please contact sales@grandsteeltube.com -
إقرأ المزيدعرض سريعSeamless CNG Steel Tube
CNG/LPG high pressure tube
1. standard and Material: ISO15500, seamless low carbon steel tube or seamless stainless steel tube.,etc
2. Treatment: bright annealed tubes; Air-tight test 30MPa
3. Product usage: CNG high pressure tube is used for LPG , CNG sequential injection system conversion kits.
4. Both ends of tube without rag, corner processing, smooth, absence of istortion.
5. Steel tube is seamless tube with bright annealing treatment
6. Inside of tube should be no rust
7.Bending tube with tools of 25mm radius, bending torsion is no more than 11NM
8. التعبئه: PVC package requirement in cartons -
إقرأ المزيدعرض سريعStraight brake line
-
إقرأ المزيدعرض سريعPVF Copper Brazed Bundy Tube-Brake Line
-
إقرأ المزيدعرض سريعSingle Wall Zn-plated Bundy Tube
The bundy steel tube has fine inside cleanness, قوة عالية, nice elongation, good foundation for late process , anti leakage, anti high pressure explosion, excellent anti corrosion power after surface treatment. It is an ideal material for tubes of condensation , evaporation and autos.The tube can be provided in coils or cut to length,الخ.Thickness of zinc may reach 8μm,12μm,15um,20μm,25μm.إذا كان هناك أي أسئلة,يرجى الاتصال sales@grandsteeltube.com