Seamless CNG Steel Tube
CNG/LPG high pressure tube
1. standard and Material: ISO15500, seamless low carbon steel tube or seamless stainless steel tube.,etc
2. Treatment: bright annealed tubes; Air-tight test 30MPa
3. Product usage: CNG high pressure tube is used for LPG , CNG sequential injection system conversion kits.
4. Both ends of tube without rag, corner processing, smooth, absence of istortion.
5. Steel tube is seamless tube with bright annealing treatment
6. Inside of tube should be no rust
7.Bending tube with tools of 25mm radius, bending torsion is no more than 11NM
8. التعبئه: PVC package requirement in cartons
- مزايا جراند
- استخبار
1. 12 years experience in production of Compress Natural Gas steel tubes
2. 10 سنوات من الخبرة في العمل مع العملاء من أوروبا,غرب آسيا,أمريكا الشمالية,أمريكا الجنوبية,الخ
3. يمكن تسليم العينات في غضون 10 أيام بعد التأكيد
4. 40 أيام كفترة الإنتاج والتسليم بعد تأكيد الطلب.
5. 20,000 meters of bright annealed seamless steel tubes in stock.
6. Sizes can be offered: التطوير التنظيمي:6mmxWT:1mm or OD:8mmxWT:1المليمتر
7. التفتيش من طرف ثالث مثل:TUV,بي,اس جي اس,إلخ مقبولة
8. فريق محترف يساعد متطلبات الأنبوب الخاصة بك.
9. Other related tubes:EN10305 Series steel tubes,seamless/welded stainless tubes,honed steel tubes;الخ
منتجات ذات صله
-
إقرأ المزيدعرض سريعLow Carbon Colorful Bundy Tube
Colorful double wall bundy steel tube has fine inside cleanness, قوة عالية, nice elongation, good foundation for late process , anti leakage, anti high pressure explosion, excellent anti corrosion power after surface treatment. It is an ideal material for tubes of condensation , evaporation and autos. The tube can be provided in coils or cut to straight length,الخ.Thickness of znic may reach 8μm,12μm,15μm,20μm,25μm.إذا كان هناك أي أسئلة,يرجى الاتصال sales@grandsteeltube.com -
إقرأ المزيدعرض سريعCopper Brake Line Tubing Kit Fittings
-
إقرأ المزيدعرض سريعDouble Wall Bundy Steel Tube
Bundy tube, also called Bundy pipe, is a double wall copper brazed steel tube. The manufacture of Bundy tube is a continuous process of rolling a copper coated steel strip through 720 degrees, brazing the outer and inner circle of the strip together by the melted copper layer to form a round tube with a continuous circular seam, and annealing. We are using fully automatic production lines with online process monitoring and continuous fabrication of the Bundy tubes.The bundy steel tube has fine inside cleanness, قوة عالية, nice elongation, good foundation for late process , anti leakage, anti high pressure explosion, excellent anti corrosion power after surface treatment. It is an ideal material for tubes of automotive industry.The tube can be provided in coils or cut to length,etc.Thickness of copper coating: ≥3umإذا كان هناك أي أسئلة,يرجى الاتصال sales@grandsteeltube.com -
إقرأ المزيدعرض سريعPVF coated bundy steel tube
The bundy steel tube has fine inside cleanness, قوة عالية, nice elongation, good foundation for late process , anti leakage, anti high pressure explosion, excellent anti corrosion power after surface treatment. It is an ideal material for tubes of automotive industry.The tube can be provided in coils or cut to length,الخ.Thickness of PVF coating may reaches: 8μm,12μm,15μm,25μmإذا كان هناك أي أسئلة,please contact sales@grandsteeltube.com -
إقرأ المزيدعرض سريعCopper-Nickel Automotive Vehicle Brake Tubing
A vehicle’s braking system is as crucial to a vehicle’s performance as its engine and drive train. The tubing carrying pressurized air or fluid through the system is the vital link between master cylinder and slave cylinders at the wheels.
Brake system tubing is vulnerable to the pressures of air or fluid flowing through it, to corrosion from road mud and salt, and to damage of any protective coatings on its surfaces from stone pecking where it is exposed under the chassis.
Copper-nickel alloy C70600, an alloy of 90% النحاس و 10% nickel, is inherently corrosion resistant to road salt, and its use as brake tubing is increasing based on: 1) Changing life-expectancy for automotive vehicles; 2) Worldwide service-experience data on brake tubing wear; و 3) Increasing cost of corrosion-retarding coatings for steel brake tubing.
إذا كان هناك أي أسئلة, لا تتردد في الاتصال sales@grandsteeltube.com
-
إقرأ المزيدعرض سريعSteel Zinc Brake Line Fuel Tubing Kit
-
إقرأ المزيدعرض سريعSingle Wall Zn-plated Bundy Tube
The bundy steel tube has fine inside cleanness, قوة عالية, nice elongation, good foundation for late process , anti leakage, anti high pressure explosion, excellent anti corrosion power after surface treatment. It is an ideal material for tubes of condensation , evaporation and autos.The tube can be provided in coils or cut to length,الخ.Thickness of zinc may reach 8μm,12μm,15um,20μm,25μm.إذا كان هناك أي أسئلة,يرجى الاتصال sales@grandsteeltube.com -
إقرأ المزيدعرض سريعPVF Copper Brazed Bundy Tube-Brake Line
-
إقرأ المزيدعرض سريعGalfan Coating Bundy Tube
Bundy tube, also called Bundy pipe, is a double wall copper brazed steel tube. The manufacture of Bundy tube is a continuous process of rolling a copper coated steel strip through 720 degrees, brazing the outer and inner circle of the strip together by the melted copper layer to form a round tube with a continuous circular seam, and annealing. We are using fully automatic production lines with online process monitoring and continuous fabrication of the Bundy tubes.The bundy steel tube has fine inside cleanness, قوة عالية, nice elongation, good foundation for late process , anti leakage, anti high pressure explosion, excellent anti corrosion power after surface treatment. It is an ideal material for tubes of automotive industry.The tube can be provided in coils or cut to length,etc.Thickness of copper coating: ≥3umإذا كان هناك أي أسئلة,يرجى الاتصال sales@grandsteeltube.com -
إقرأ المزيدعرض سريعStraight brake line