Скважинные химические инъекционные трубки
Инколой 825 капиллярная трубка обладает отличной устойчивостью к коррозии серной кислоты и фосфорной кислоты, межкристаллитная коррозия после сварки. Он не приведет к коррозионному растрескиванию под напряжением хлорида. Обладает отличной устойчивостью к точечной коррозии и щелевой коррозии в хлоридно-ионосодержащей среде, обладает высокой устойчивостью к коррозии под напряжением под средой раствора соли хлорида натрия. В дополнение, обладает высокой прочностью и хорошей ударной вязкостью.
Если есть вопросы,пожалуйста, свяжитесь с нами sales@grandsteeltube.com
- Приметы:__________
- Подробная информация
- Запрос
3 / 8 * 0.035 Сплав 825 Downhole Chemical Injection Tubing ASTM B704
Baosheng offers a variety of duplex stainless steel, super duplex stainless steel welded and seamless tubing, depending upon the properties the tubing is required to exhibit. Other alloys and sizes are also available upon request. Duplex stainless steels (named for their austenite and ferrite compositions), has greater yield strength than austenitic stainless steel.
It is mainly used in flue gas desulfurization spray towers, reverse osmosis seawater desalination equipment and pumps, chemical reaction kettles and pipelines, heat exchangers using seawater media, crude oil separation distillation towers and metal fillers, marine oil and gas extraction equipment as well as scrubber drums, pressure rollers, tanks, Трубы, и так далее. in the pulp bleaching systems.
We have a mature quality control system to ensure a 100% qualified delivery rate:
Chemical composition analysis
Tensile testing
Твёрдость
Flattening
Ослепительный
Hydrostatic testing
Eddy current testing
Our products have complete specifications and can meet all working conditions. Our outer diameter range of Alloy 825 tubing is from 1/8″ to 1/2″. All dimensions and corresponding parameters are listed in the table below, we can also customize it according to customers’ special requirements.
Если есть вопросы,Вы более чем можете связаться с нами sales@grandsteeltube.com
ОД | Wall (inch) |
Материалы | Стандарт | Working Pressure (Мпа) |
Длина |
1/8" | 0.02,0.028,0.035 | Austenitic steel 304L (UNS S30403) Austenitic steel 316L (UNS S31603) Duplex 2205 (УНС С32205 & С31803) Super Duplex 2507 (UNS S32750) Инколой 825 (UNS N08825) Инконель 625 (UNS N06625) |
ASTM-A 269 ASTM-A 632 ASTM-A 789 ASTM-B 704 |
60-120 Мпа | Настроить |
3/16" | 0.02,0.028,0.035,0.049 | ||||
1/4" | 0.02,0.028,0.035,0.049,0.065.0.083 | ||||
5/16" | |||||
3/8" | |||||
1/2" | |||||
* ОД: До 1 inch |
Стандарты | |||||
ASTM-A269 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service | ||||
ASTM-A632 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service | ||||
ASTM-A789 | Standard specification for seamless and welded ferritic /austenitic stainless steel tubing for general service. | ||||
ASTM-B704 | Specification titled “Nickel-Alloy (ООН НЕТ 6625 & NO8825) Welded Tube”. |
Если есть вопросы,Вы более чем можете связаться с нами sales@grandsteeltube.com