Folha de titânio
Folha de titânio é uma placa de titânio, tira, rolo ou chapa com espessura menor ou igual a 0,2mm. A largura máxima da folha de titânio laminada é de cerca de 600mm.
A largura da folha de titânio é cortada de acordo com as exigências do usuário. Mas quanto mais ampla for a fabricação, quanto maior a produtividade.
A folha de titânio é usada principalmente na indústria aeroespacial, navegação, energia nuclear, eletrônica, indústria química, petróleo, fabricação de precisão, médico, farmacêutico e outros aspectos.
- Descrição
- Especificações
- Inquérito
Titanium foil – Preparation Method
The raw material for industrially producing titanium is mainly rutile ore or high titanium slag (containing 92% or more of Ti02). Titanium sponge production process is based on high titanium slag and petroleum coke as raw material for the production of titanium tetrachloride. Titanium sponge can be obtained by reducing refined titanium tetrachloride with magnesium or sodium in a rare gas stream.
Magnesium reduction distillation method: the proportion of high titanium slag and petroleum coke is 100 (30~33), and the mixture is broken to less than 160 mesh, and sent to the fluidized bed chlorination furnace, and the chlorine gas is passed through the bottom of the furnace, uniformly enter the reaction section of the furnace body, and react with the mixed material of high titanium slag and petroleum coke. The reaction temperature was about 850 °c. The generated titanium tetrachloride gas is discharged from the top of the furnace and enters two separator dust collectors connected in series, so that high boiling points such as iron trichloride, iron dichloride, manganese dichloride and aluminum trichloride mixed in the titanium tetrachloride gas are deposited at the bottom of the separator dust collector. The gas was reintroduced into the two sets of condensers connected in series, and the titanium tetrachloride gas was cooled to below 136 ° C. To obtain a crude titanium tetrachloride solution. The low-boiling matters, such as silicon tetrachloride, therein are distilled off by means of a float valve column distillation. After heating to 140 ° C. In a copper chip Tower, the gasified titanium tetrachloride is passed into a copper chip Tower, and the contained impurity vanadyl trichloride is reduced by copper to a low-valent chloride of vanadium. The purified titanium tetrachloride gas discharged from the top of the column was subjected to a reduction reaction with magnesium in a rare gas stream at about 900 ° C. To obtain titanium sponge. Since the resulting sponge-like titanium also contains magnesium chloride as a by-product and unreacted magnesium, the sponge-like titanium must be placed under a vacuum of 0.1 Para 10-3 Papai, the impurities were separated from the titanium by heating to about 1000 °c.
Titanium foil – Use
titanium alloy has high strength, a large number of structural materials used in the manufacture of military supersonic aircraft, compression Components of jet engines, components of aircraft frames, housings, fire barriers, rivets, structural components of air transport equipment, there is a “space metal”; Military facilities and military ships armored plate and propeller blades. In the civilian industry, titanium and its alloys can be used in the manufacture of various pumps, valves, filtration, evaporation equipment wire mesh and various machine parts. Powdered titanium can be used as an oxygen scavenger in the electron tube manufacturing process.
Titanium foil – Safety
hazard code: flammable solid. GB4.1 class 41505. UN NO.2678 (strontium powder). IMDG CODE P. 4177, Class 4.1. Each batch of product should be divided into galvanized iron barrels lined with plastic film, and the weight of each (piece) of the drum is 70~250, and it is sealed with a large open cover. Magnesium reduction titanium must be evacuated and filled with argon in the barrel after packaging. Titanium can be protected without argon by sodium reduction. “Moisture-proof” shall be indicated on the outside of the packaging barrel. Should be stored in a ventilated, dry warehouse. Shall not be stacked in the open air, and shall not be mixed with acid, alkali and other corrosive substances. During the transport process, it is necessary to prevent rain and humidity. During loading and unloading, care should be taken to prevent breakage of the packaging barrel. Titanium tetrachloride used in the production process can make people suffering from chronic bronchitis, chronic hypertrophic rhinitis, pharyngitis. Autonomic nervous system dysfunction, increased tendon reflexes, tremor of the eyelids and hands, hyperhidrosis. Thermal burns were more difficult to heal when exposed to 10% titanium tetrachloride solution. When exposed to titanium tetrachloride smoke, wear an industrial filter gas mask. To protect the eyes and skin. If you accidentally spatter on the skin, wipe it off with cotton gauze and then wash it thoroughly with water. Production equipment should be closed and the workshop should be well ventilated. Dry powder and dry sand can be used to put out the fire, and water, foam and carbon dioxide are strictly prohibited. In case of high heat or intense combustion, explosion may be caused by water suppression.
Folha de titânio é uma placa de titânio, tira, rolo ou chapa com espessura menor ou igual a 0,2mm. A largura máxima da folha de titânio laminada é de cerca de 600mm.
A largura da folha de titânio é cortada de acordo com as exigências do usuário. Mas quanto mais ampla for a fabricação, quanto maior a produtividade.
A folha de titânio é usada principalmente na indústria aeroespacial, navegação, energia nuclear, eletrônica, indústria química, petróleo, fabricação de precisão, médico, farmacêutico e outros aspectos.
Titanium alloy has high strength and low density, good mechanical properties, good toughness and corrosion resistance.
The two most prominent advantages of titanium are high specific strength and strong corrosion resistance, which determines that titanium must have broad application prospects in aerospace, weaponry, energy, químico, metallurgy, construction and transportation. The rich reserves provide a resource base for the wide application of titanium.
Descrição | Titanium foil |
Material | Gr1, Gr2, Gr3,Gr4,Gr5, Gr7, Gr6,Gr9, Gr11, Gr12 ,Gr16, Gr17,Gr25TA0,TA1,TA2,TA5,TA6,TA7,TA9,TA10,TB2,TC1,TC2,TC3,TC4 |
Padrão | ASTM B265,ASME SB265,DIN17851,TiA16Zr5Mo1.5,JIS4100-2007,GB3461-2007 |
Tamanho | Espessura:0.05-0.2mmWidth:3-600milímetro
Comprimento:according to requirements |
MOQ | 100 Kilogram/Kilogrames |
Equepment used | CNC lathes, Milling machine, Machining Center,Thread rolling machine Magnetic needle polishing machine |
Características | 1.high corrosion resistance2.low density
3.non-ferromagnetic 4.good biocompatibility |
Pacote | Standard export package,suit for all kinds of transport ,or as required. |
Aplicação | 1.Based on High intensity,titanium products tensile strength can be up to 180Kg/mm².2.Titanium and titanium alloy in aviation industry, is called “space metal”; Além disso,
in the shipbuilding industry, indústria química, manufacturing machinery parts, telecommunications equipment, hard alloy, etc have increasingly extensive application 3.Além disso, because of the titanium alloy with the human body has very good compatibility, so the titanium alloy can also be artificial bone. |
Composição química:
Composition (%) | C | N | Fe | O | H | Al | V | Ti |
GR1 | ≤0.08 | ≤0.03 | ≤0.20 | ≤0.18 | ≤0.015 | – | – | Bal. |
GR2 | ≤0.08 | ≤0.03 | ≤0.30 | ≤0.25 | ≤0.015 | – | – | Bal. |
GR5 | ≤0.10 | ≤0.05 | ≤0.30 | ≤0.20 | ≤0.015 | 5.50-6.80 | 3.50-4.50 | Bal. |
Características
|
The density of titanium is 4.506-4.516g/cm^3, melting point is 1668, boiling point is 3535. Therefore Titanium have low
weight,excellent high strength and nonmagnetic festures, low density, excellent corrosion resistance features, high specific strength and high temperature resistance features, so it is widely used in chemical industry field, medical field, eletrônica manufacture, mechanical parts field, automobile industry, and aerospace field, etc. |
Produtos relacionados
-
Leia maisVisualização Rápida
Chapas de Aço Inox
Chapas de Aço Inox & Placas são constituídos por aço austenítico contêm principalmente cromo e níquel com a adição de elementos raros que oferecem alta resistência à corrosão, alta resistência à tração, excelente impacto & tenacidade e resistência a altas temperaturas em temperaturas criogênicas. Além disso, estas Folhas SS & As placas são altamente exigidas em várias indústrias, como a química & processamento de alimentos, trocadores de calor, fresco & ambientes marinhos de água salgada, automóveis e muito mais.
-
Leia maisVisualização Rápida
Titanium Bar
-
Leia maisVisualização Rápida
Folha de titânio
Titanium plate has high corrosion resistance and specific strength, and is widely used in electric power, indústria química, aviation parts, building materials, sports equipment, medical and other fields and is still expanding. From the point of view of use and manufacturing technology, titanium plate has low price, high performance, multiple functions, and easy production.
Em caso de dúvidas,por favor, não hesite em contactar sales@grandsteeltube.com
-
Leia maisVisualização Rápida
Bar de latão
-
Leia maisVisualização Rápida
Folha de aço inoxidável
As folhas de aço inoxidável são tiras finas de aço inoxidável que são menores que 0.2 mm de espessura e inferior a 300 mm de largura.
As folhas de aço inoxidável oferecem uma variedade de vantagens, incluindo estabilidade química, alta relação força/peso, isolamento elétrico e resistência à corrosão.
Folha de aço inoxidável é usada na produção de trocadores de calor, capacitores e células de combustível; bem como em equipamentos médicos e máquinas de processamento de alimentos.
As folhas de aço inoxidável são um material versátil com muitas vantagens. Sua alta resistência à corrosão, boas condutividades térmicas e elétricas e sua ductilidade o torna uma excelente escolha para uma ampla gama de aplicações.
A folha de aço inoxidável está disponível em vários tipos diferentes. Estes incluem séries austeníticas, Série Ferrítica, Série Martensítica, Série duplex e super duplex. Cada grau tem diferentes elementos de liga que contribuem para as propriedades da folha.
Os tipos mais comuns de folhas de aço inoxidável são 304 e 316. Estes tipos são fornecidos em espessuras que variam de 0.009mm a 0.3mm. Outros tipos de folha de aço inoxidável também estão disponíveis mediante solicitação, incluindo: 409, 430 e duplex 2205.
-
Leia maisVisualização Rápida
Stainless Steel Coil
Stainless steel coil can be divided into cold rolled stainless steel coil and hot rolled stainless steel coil according to different production processes.
According to the materials, they can be divided into austenite, martensite, ferrite and duplex.
Common use stainless steel coils grades are often represented by digital symbols.
There are 200 series, 300 series, 400 series and duplex series.
304, 304L, 316 and 316L stainless steel coils are the most popular and economical grades of stainless steels.
Stainless steel 304/304L coils and stainless steel 316/316L coils, along with duplex stainless steel coils offer good corrosion resistance to many chemical environments as well as marine and industrial exposures.
-
Leia maisVisualização Rápida
Aluminium foil
Aluminium foil is aluminium prepared in thin metal leaves with a thickness of less than 0.2mm (7.9 mils); thinner gauges down to 4 micrometers are also commonly used. Standard household foil is typically 0.016 milímetro (0.63 mils) thick, and heavy-duty household foil is typically 0.024 milímetro (0.94 mils). And the air conditioner foil can be thinner than 0.0047mm, and some food foil thinner than 0.002mm. The foil is pliable and can be readily bent or wrapped around objects. Thin foils are fragile and are sometimes laminated with other materials such as plastics or paper to make them stronger and more useful. It’s used industrially for a variety of purposes, including packing, insulation and transportation. At home, people use aluminum foil for food storage, to cover baking surfaces and to wrap foods, such as meats, to prevent them from losing moisture while cooking.
-
Leia maisVisualização Rápida
Copper Foil
Copper is a reddish brown metallic element with outstanding characteristics such as good ductility, ductilidade, heat and conductivity
Pure copper is a very soft and ductile metal To achieve the required performance, we can alloy with other metals Brass and bronze are widely used copper alloys
Copper foil is made of copper or copper alloy by hot rolling and cold rolling The thickness of copper foil ranges from 0.03mm to 0.2mm, and the width and length can be customized according to customer requirements
-
Leia maisVisualização Rápida
Aluminium Coil
Aluminium coil is a rolled product, produced in a coiled form of a continuous strip, and has an inner diameter and outer diameter. ID from50mm to 1000mm. Aluminium alloy grade including 1xxx, 2xxx, 3xxx, 4xxx, 5xxx, 6xxx, 7xxx, 8xxx. But the most common is 1050, 3003, 6061 e 5251 aluminum coil. Thickness from 0.045-80mm, width from 60-2650mm. Common widths of aluminum coil is 800mm,1000milímetro, 1250milímetro,1450mm and 1500mm.
Multiple industries rely on aluminium coils for a variety of applications, such as automotive, construção, heat transfer, pharmaceutical, electrical, and food industry. Compared to other materials, aluminum is a far superior material in many instances. Aluminum coil can be supplied with standard mill finish, or it can be brushed, checkered, color coated, satin-finished and anodized. Aluminium sheet or aluminium foil can be cut into coils as per client’s requirements.
-
Leia maisVisualização Rápida
Folha de cobre
A folha de cobre é uma forma de metal muito viável e maleável, alta condutividade elétrica e térmica, e proporciona excelente resistência à corrosão. Um metal bonito e versátil, O cobre tem sido utilizado há milhares de anos. Historicamente, Serviu como uma escolha favorita na fabricação de ferramentas, Navios, e esculturas. O cobre também é conhecido por suas belas pátinas. Quando exposto, Sem lacre, para um ambiente ao ar livre, o cobre começa a oxidar. Esta exposição cria belas variações de cor na forma de uma pátina. A coloração da pátina mudará e desenvolverá caráter ao longo do tempo, servindo para proteger o metal da deterioração. As pessoas também criarão uma pátina rapidamente com o uso de misturas químicas que aceleram o processo e permitem que uma pátina se desenvolva sem exposição ao ar livre. Folhas de cobre também podem ser marteladas, Equipado, ou em relevo para textura adicional e apelo decorativo ou funcional e vêm em muitas espessuras, desde folha de cobre muito fina até chapa de cobre grossa. Ele também vem em muitas ligas que misturam outros metais com cobre. Na Grand Copper, Nós vendemos cobre puro -C110 (outras ligas e têmperas disponíveis mediante solicitação). Esta alta pureza fornece a qualidade premium necessária para projetos e aplicações em uma ampla gama de indústrias e usos. Temos orgulho em fornecer o melhor material. Nossa alta qualidade, material acessível e amigável, O atendimento ao cliente de primeira linha nos tornou um líder no setor por mais de uma década.
- DIN2391 Tubo de aço de precisão
- EN10305-1/4 tubo de aço de precisão
- EN10305-2/3/5/6 Tubos de precisão
- Tubos de precisão série SAE
- ISO8535-1 tubo de injeção de combustível
- Único/Doulbe Tubo Bundy de parede
- Caldeira & Tubos de aço de pressão
- Tubo de aço afiado/SRB sem costura
- Tubos de aço capilar inoxidável
- Tubos inoxidáveis sem costura & Tubos
- Tubos Inox Soldados & Tubos
- Injecção & Tubos de linha de controle
- Tubos de liga de níquel & Tubos
- Tubos capilares não ferrosos
- Tubos de alumínio & Tubos
- Tubos de latão & Tubos
- Tubos de cobre & Tubos
- Tubos de titânio & Tubos
- Tubo de aleta extrudado / soldado
- Tubo de precisão não ferroso
- Tubos de aço em forma especial
- Bobina metálica/folha/folha/tira