Stainless Steel Strip is an austenitic chromium-nickel-manganese stainless steel that offers electromagnetic properties like electrical resistivity, magnetic permeability & electrical conductivity and Young’s Modulus of Elasticity. We offer these stainless steel strips in various material grades such as Stainless Steel 304 Strips, Stainless Steel 310 Strips, Stainless Steel 316 Strips, Stainless Steel 904 Strips and many more.
Titanium coils
Because of the poor thermal conductivity of pure titanium, the emulsion with good lubrication effect and excellent cooling performance is required in the rolling process, and the rolling speed should not be too fast, in order to prevent the high temperature of pure titanium and cause the phenomenon of “sticking roller”, and “sticking roller” resulting in rough surface of titanium and poor quality. The residual water and oil on the surface of the titanium strip decompose during the annealing process, which affects the partial pressure of oxygen in the furnace and causes the decomposition reaction to go in the opposite direction, forming oxidation on the surface of the titanium strip and affecting the annealing quality. Because titanium strip annealing before full degreasing cleaning and drying plate surface. The degreasing speed of titanium strip is generally 20m/min, and the speed is adjusted according to the surface quality of the titanium strip after degreasing. Straightening is to ensure the flatness of the product plate.
- Descrição
- Especificações
- Inquérito
Manufacturing process
Cold rolled titanium coil due to different production processes (or finished product surface) generally divided into cold rolled pickling surface titanium coil and cold rolled glossy titanium coil.
The manufacturing process of cold rolled pickling surface titanium coil of XRUN is: sponge titanium — melting — forging — hot rolling — heat treatment — shot blasting — hot rolled pickling white roll — cold rolling — heat treatment — shot blasting — pickling — edge cutting — inspection — cold rolled pickling white roll — packing and storage.
production process
In the production process, because the product is rolled twice, the oxide scale will be produced. Two heat treatment and shot blasting pickling are the treatment of the oxide scale on the surface of the product, so as to better ensure the quality of the product. Cold rolled pickling surface titanium coil is generally used in aerospace, industry and marine engineering. Compared with the former, cold rolled glossy titanium coil is more widely used. Similarly, there are two more steps in the production process of cold rolled titanium coil with glossy surface than pickling surface: degreasing annealing and straightening.
Because of the poor thermal conductivity of pure titanium, the emulsion with good lubrication effect and excellent cooling performance is required in the rolling process, and the rolling speed should not be too fast, in order to prevent the high temperature of pure titanium and cause the phenomenon of “sticking roller”, and “sticking roller” resulting in rough surface of titanium and poor quality. The residual water and oil on the surface of the titanium strip decompose during the annealing process, which affects the partial pressure of oxygen in the furnace and causes the decomposition reaction to go in the opposite direction, forming oxidation on the surface of the titanium strip and affecting the annealing quality. Because titanium strip annealing before full degreasing cleaning and drying plate surface. The degreasing speed of titanium strip is generally 20m/min, and the speed is adjusted according to the surface quality of the titanium strip after degreasing. Straightening is to ensure the flatness of the product plate.
Product parameters
Produto | Specification(milímetro} | Grau | Padrão | Resistência à tração | Resistência ao Rendimento | Elongação |
pickling surface | Width(1.0~4.0) x (50~1200) x L | GR1/
GR2/ GR3/ GR4 |
ASTM B265 ASME SB265 |
≥240/
≥345/ ≥450/ ≥550 |
138~310/
275~450/ 380~550/ 483~655 |
≥24/
≥20/ ≥18/ ≥15 |
glossy surface | Width(0.2~3.0) x (50~1200) x L |
The titanium coil is mainly used as a container for heating and cooling. titanium coil fixation is divided into two kinds of detachable and non-detachable, This depends on the medium's corrosion of the titanium coil. But mainly based on removable type, convenient maintenance and cleaning of titanium coil.
Application features
Excellent corrosion resistance in many media
Smooth surface, clean layer
Baixa densidade, high strength and light weight
Baixa densidade, high specific strength
The density of metallic titanium is 4.51g/cm3, which is higher than that of aluminum and lower than that of steel, cobre, and nickel, but the specific strength is at the top of the metal.
Resistência à corrosão
Titanium is a very active metal with a low equilibrium potential and a high tendency for thermodynamic corrosion in media. Contudo, titanium is actually very stable in many media. For example, titanium is resistant to corrosion in media such as oxidative, neutral and weak reducibility. This is because titanium and oxygen have a great affinity. In air or oxygen-containing medium, a dense, strong and inert oxide film is formed on the surface of titanium to protect the titanium matrix from corrosion. Even if it is due to mechanical wear, it will quickly heal or regenerate. This shows that titanium is a metal with a strong tendency to passivation. The oxide film of titanium below the temperature of 315°C always maintains this characteristic.
In order to improve the corrosion resistance of titanium, surface treatment technologies such as oxidation, electroplating, plasma spraying, ion nitriding, ion implantation, and laser processing have been studied. Titanium oxide film played a role in enhancing protection and obtaining desired corrosion resistance. A series of corrosion-resistant titanium alloys such as titanium-molybdenum, titanium-palladium, and titanium-molybdenum-nickel have been developed to meet the needs of metal materials in the production of sulfuric acid, hydrochloric acid, methylamine solution, high-temperature wet chlorine, and high-temperature chloride. Titanium-32-molybdenum alloys are used in titanium castings. Titanium-0.3 molybdenum-0.8 nickel alloys are used in environments where crevice corrosion or pitting corrosion frequently occurs. Titanium-0.2palladium alloys were used locally in titanium equipment, and good results were obtained.
Good heat resistance
The new titanium alloy can be used long-term at 600 °C or higher.
Low temperature resistance
Low temperature titanium alloy represented by titanium alloys TA7 (Ti-5Al-2.5Sn), TC4 (Ti-6Al-4V) and Ti-2.5Zr-1.5Mo, etc.Its strength increases with decreasing temperature, but the plasticity changes are not large.It maintains good ductility and toughness at -196-253°C and avoids cold brittleness. It is an ideal material for cryogenic vessels and tanks.
Strong anti-damping performance
After metal titanium is subjected to mechanical vibration and electric vibration, its own vibration decay time is the longest compared with steel and copper metal. The use of this property of titanium can be used as a tuning fork, a medical ultrasonic vibrator vibration element, and an advanced sound speaker vibration film.
Non-magnetic, non-toxic
Titanium is a non-magnetic metal, it will not be magnetized in a large magnetic field, non-toxic and has good compatibility with human tissues and blood, so it is used by the medical community.
Tensile strength is close to its yield strength
This property of titanium shows that the yield strength ratio (tensile strength/yield strength) is high, indicating that the metal titanium material is poor in plastic deformation during forming. Since the ratio of the yield limit of titanium to the elastic modulus is large, the resilience of titanium when molded is large.
Good heat transfer performance
Although the thermal conductivity of titanium metal is lower than that of carbon steel and copper, due to the excellent corrosion resistance of titanium, the wall thickness can be greatly reduced, and the heat exchange mode between the surface and steam is droplet condensation, which reduces the thermal group. Titanium surface without scaling can also reduce the thermal resistance, so that the heat transfer performance of titanium is significantly improved.
Low modulus of elasticity
The modulus of elasticity of titanium is 106.4 GMPa at room temperature, which is only 57% of steel.
Suction performance
Titanium is a chemically very reactive metal that reacts with many elements and compounds at high temperatures. Titanium inhalation mainly refers to reaction with carbon, hydrogen, nitrogen, and oxygen at high temperatures.
Materials
Can be divided into: TA1 [Content 99,6], TA2 [Content 99,5], TA9 [Titanium Palladium Alloy], TA10 [Ti-Mo-Ni alloy
Titanium
The density of metallic titanium is 4.51g/cm3, which is higher than that of aluminum and lower than that of steel, cobre, and nickel, but the specific strength is at the top of the metal. Resistência à corrosão, titanium is a very active metal, its equilibrium potential is very low, the tendency of thermodynamic corrosion in the medium. Contudo, titanium is actually very stable in many media. For example, titanium is resistant to corrosion in media such as oxidative, neutral and weak reducibility. This is because titanium and oxygen have a great affinity. In air or oxygen-containing medium, a dense, strong and inert oxide film is formed on the surface of titanium to protect the titanium matrix from corrosion. Even if it is due to mechanical wear, it will quickly heal or regenerate. This shows that titanium is a metal with a strong tendency to passivation. The oxide film of titanium below the temperature of 315°C always maintains this characteristic. In order to improve the corrosion resistance of titanium, surface treatment technologies such as oxidation, electroplating, plasma spraying, ion nitriding, ion implantation, and laser processing have been studied. Titanium oxide film played a role in enhancing protection and obtaining desired corrosion resistance. A series of corrosion-resistant titanium alloys such as titanium-molybdenum, titanium-palladium, and titanium-molybdenum-nickel have been developed for the production of sulfuric acid, hydrochloric acid, methylamine solution, high-temperature wet chlorine, and high-temperature chlorides, and for metal materials. Titanium castings use titanium-32 molybdenum alloys. Titanium-0.3 molybdenum-0.8 nickel alloys are used for crevice corrosion or pitting environments. Titanium-0.2 palladium alloys are used locally for titanium equipment. effect. Good heat resistance The new titanium alloy can be used long-term at 600°C or higher. Low-temperature-resistant titanium alloys such as titanium alloys TA7 (Ti-5Al-2.5Sn), TC4 (Ti-6Al-4V), and Ti-2.5Zr-1.5Mo, etc., whose low-temperature titanium alloys increase in strength as the temperature decreases, Plasticity is not great. It maintains good ductility and toughness at -196-253°C and avoids cold brittleness. It is an ideal material for cryogenic vessels and tanks.
Produtos relacionados
-
Leia maisVisualização Rápida
Bobina de latão
Bobina de latão tem excelente plasticidade (O melhor em latão) e alta resistência, boa usinabilidade, fácil de soldar, muito estável à corrosão geral, mas propenso a corrosão, rachaduras; bobina de latão é cobre e a liga de zinco é nomeada por sua cor amarela.
As propriedades mecânicas e a resistência ao desgaste da bobina de latão são muito boas, e pode ser usado para fabricar instrumentos de precisão, peças de navio, cartuchos de armas, etc. Latão bate e soa bem, Assim, instrumentos como pratos, pratos, Sinos, e os números são feitos de latão. De acordo com a composição química, O latão é dividido em cobre comum e latão especial.
-
Leia maisVisualização Rápida
Chapas de Aço Inox
Chapas de Aço Inox & Placas são constituídos por aço austenítico contêm principalmente cromo e níquel com a adição de elementos raros que oferecem alta resistência à corrosão, alta resistência à tração, excelente impacto & tenacidade e resistência a altas temperaturas em temperaturas criogênicas. Além disso, estas Folhas SS & As placas são altamente exigidas em várias indústrias, como a química & processamento de alimentos, trocadores de calor, fresco & ambientes marinhos de água salgada, automóveis e muito mais.
-
Leia maisVisualização Rápida
Folha de cobre
A folha de cobre é uma forma de metal muito viável e maleável, alta condutividade elétrica e térmica, e proporciona excelente resistência à corrosão. Um metal bonito e versátil, O cobre tem sido utilizado há milhares de anos. Historicamente, Serviu como uma escolha favorita na fabricação de ferramentas, Navios, e esculturas. O cobre também é conhecido por suas belas pátinas. Quando exposto, Sem lacre, para um ambiente ao ar livre, o cobre começa a oxidar. Esta exposição cria belas variações de cor na forma de uma pátina. A coloração da pátina mudará e desenvolverá caráter ao longo do tempo, servindo para proteger o metal da deterioração. As pessoas também criarão uma pátina rapidamente com o uso de misturas químicas que aceleram o processo e permitem que uma pátina se desenvolva sem exposição ao ar livre. Folhas de cobre também podem ser marteladas, Equipado, ou em relevo para textura adicional e apelo decorativo ou funcional e vêm em muitas espessuras, desde folha de cobre muito fina até chapa de cobre grossa. Ele também vem em muitas ligas que misturam outros metais com cobre. Na Grand Copper, Nós vendemos cobre puro -C110 (outras ligas e têmperas disponíveis mediante solicitação). Esta alta pureza fornece a qualidade premium necessária para projetos e aplicações em uma ampla gama de indústrias e usos. Temos orgulho em fornecer o melhor material. Nossa alta qualidade, material acessível e amigável, O atendimento ao cliente de primeira linha nos tornou um líder no setor por mais de uma década.
-
Leia maisVisualização Rápida
Titanium Strip
Titanium strip is produced from the titanium sheet. Usually cold-rolled the titanium sheet by a small mill with annealing for several times, then slitting shear to titanium strips according to customer requirements. The advanced equipment, rolling process, process control, annealing temperature and return time control ensured its smoothness and finish, effectively improved the quality of our products.
-
Leia maisVisualização Rápida
Stainless Steel Strips
Hot Rolled Stainless Steel Strips are produced from hot rolling billets or slabs and then use a cold rolling process. These processes improve strips mechanical properties such as stiffness coefficient and flexibility. Cold Rolled Stainless Steel Strips are obtained from annealed and pickled by cold rolling on polished rolls. As per the required thickness, cold rolling requires a number of passes through mill to effect reduction.
We supply SS Strips in various industries including food industries, químico, electrical, generator, shaft, cement & gas industries. The offered these Stainless Steel Strips in standards as well as customized dimensions as per the client’s requirement.
-
Leia maisVisualização Rápida
Brass Sheet
Brass Sheet based on electrolytic copper, zinc and trace elements as its raw material, through processing by ingot, hot rolling, cold rolling, heat treatment, surface cleaning, cutting, finishing, and then packing. Material processes performance, plasticity, mechanical properties, corrosion resistance, performance and good tin.
It has been widely used in electrical, automotivo, communications, hardware, decoration and other industries.
-
Leia maisVisualização Rápida
Stainless Steel Coil
Stainless steel coil can be divided into cold rolled stainless steel coil and hot rolled stainless steel coil according to different production processes.
According to the materials, they can be divided into austenite, martensite, ferrite and duplex.
Common use stainless steel coils grades are often represented by digital symbols.
There are 200 series, 300 series, 400 series and duplex series.
304, 304L, 316 and 316L stainless steel coils are the most popular and economical grades of stainless steels.
Stainless steel 304/304L coils and stainless steel 316/316L coils, along with duplex stainless steel coils offer good corrosion resistance to many chemical environments as well as marine and industrial exposures.
-
Leia maisVisualização Rápida
Bobinas de Cobre
Pode parecer que uma bobina de cobre é um simples pedaço de fio enrolado que pode ser enrolado e colocado em uso. Como acontece com qualquer forma de produto industrial, bobinas de cobre têm que ser projetadas com precisão para se adequar a uma aplicação. O processo de enrolamento deve ser concluído com precisão para garantir a distância adequada entre os fios e o diâmetro da abertura.
Cada produto que utiliza bobinas de cobre requer que um certo número de voltas seja feito para fornecer a quantidade correta de resistência. Cálculos imprecisos podem levar à ineficiência e possível falha da bobina ou dispositivo. Por esta razão, os engenheiros da Metal Associates garantem que examinaram de perto a especificação de uma aplicação tal que o diâmetro, espaçamento, espessura do fio, e o número de voltas corresponde exatamente ao design do produto onde a bobina de cobre será usada.
-
Leia maisVisualização Rápida
Tira de alumínio
Chapa de alumínio & folha em forma de rolos com espessura > 0.2milímetro, Uma largura de 20mm a 100mm é geralmente chamada de tira de alumínio. O nome comum para tiras de alumínio que são produzidas em pequenas larguras de tira é geralmente tira dividida. As chapas de alumínio são cortadas em um necessário por ferramentas de corte, A matéria-prima da tira de alumínio é alumínio puro ou liga de alumínio laminado a quente bobina de alumínio fundido e bobina laminada a quente. Através de uma máquina laminada a frio para formar diferentes espessuras e larguras da chapa rolante e bobina de alumínio, e, em seguida, a máquina de corte e corte vertical para diferentes larguras da tira. E a espessura<0.2mm, nós chamamos isso de tira de folha de alumínio ou bobina de folha de alumínio.
-
Leia maisVisualização Rápida
Copper Foil
Copper is a reddish brown metallic element with outstanding characteristics such as good ductility, ductilidade, heat and conductivity
Pure copper is a very soft and ductile metal To achieve the required performance, we can alloy with other metals Brass and bronze are widely used copper alloys
Copper foil is made of copper or copper alloy by hot rolling and cold rolling The thickness of copper foil ranges from 0.03mm to 0.2mm, and the width and length can be customized according to customer requirements
- DIN2391 Tubo de aço de precisão
- EN10305-1/4 tubo de aço de precisão
- EN10305-2/3/5/6 Tubos de precisão
- Tubos de precisão série SAE
- ISO8535-1 tubo de injeção de combustível
- Único/Doulbe Tubo Bundy de parede
- Caldeira & Tubos de aço de pressão
- Tubo de aço afiado/SRB sem costura
- Tubos de aço capilar inoxidável
- Tubos inoxidáveis sem costura & Tubos
- Tubos Inox Soldados & Tubos
- Injecção & Tubos de linha de controle
- Tubos de liga de níquel & Tubos
- Tubos capilares não ferrosos
- Tubos de alumínio & Tubos
- Tubos de latão & Tubos
- Tubos de cobre & Tubos
- Tubos de titânio & Tubos
- Tubo de aleta extrudado / soldado
- Tubo de precisão não ferroso
- Tubos de aço em forma especial
- Bobina metálica/folha/folha/tira