Skived & Roller Burnished Tube
Applications of Hydraulic honed tubing
Honed tubing and SRB tubes (skived and roller burnished tubes) are mostly used as cylinder tubes, such as hydraulic cylinder tubes and pneumatic cylinder tubings which are widely used for manufacturing and repairing hydraulic cylinders and pneumatic cylinders. As honed tube usually has very accuracy dimension tolerance and good surface smoothness, so this product is also used where precision dimension or high smooth surface is needed.
Em caso de dúvidas,entre em contato sales@grandsteeltube.com
- Descrição
- Advantages
- Especificações
- Inquérito
Skived & Roller Burnished Tube is well known as hydraulic cylinder tube in industries. As Skived & Roller Burnished Tubes are the most important material of manufacturing hydraulic cylinders
We manufacture the Skived & Roller Burnished Tube/honed pipes using our factory’s “Suitable To Hone” Steel Cold Drawn Seamless Tubes (CDS tubes)& Steel Cold Drawn Welded Tubes (CDW tubes). In order to produce extremely precise ID dimensions and smoothly ID surface, the honing process involves using abrasive polishing stones and abrasive paper to remove small amounts of material. Besides the honing process, we also use the SRB process (skiving and roller burnishing) to produce honed tubing.
Skived & Roller Burnished Tube/Honed tube is ready to use for hydraulic cylinder applications without further ID processing.
Production standards:
Hydraulic cylinder tube is made of our factory’s own cold drawn seamless tube (CDS tube)/Steel Cold Drawn Welded Tubes (CDW tubes), by honing process or Skiving & Roller Burnishing process. Mean while the tube is usually produced according to norms as ASTM A513, RUÍDO 2391, RUÍDO 1630, RUÍDO 1629, EN 10216-2, Um 519, etc on customer’s request.
Steel Grades:
Baosheng manufactures Honed tubes in a wide range of carbon steel and stainless steel grades.
Carbon steel Honed tubes are available with grades as below:
•SAE 1020 •SAE 1026 •SAE1030/1035
•E355, E255, E215, E235
•ST52.3, St35, ST 52.4, St 37.4
Stainless steel Honed tube/Skived & Roller Burnished Tube can be supplied in grades as below:
•TP 304 / 304L •TP316 / 316L•TP 316Ti
Other steel grades of hone tube /honed pipe is available on customer’s request.
Baosheng manufactures honed hydraulic cylinder tube in full range of metric sizes and imperial sizes.
•Metric size honed tubes: D.I. 30 mm to I.D 400 milímetro, Espessura da parede 3 – 50 milímetro
•Imperial size honed tubes / inch size honed pipe: 1.5” ID – 14.0” Honed ID; 1/8” – 1” wall thickness
•Length: We supply our metric size and imperial size honed tube with random length or fixed length up to 12 Metros.
Em caso de dúvidas,você é mais do que bem-vindo para entrar em contato sales@grandsteeltube.com
1. Production of skived & roller burnished tube/honed tube since 2005.
2. Trabalhar com clientes da Europa,Ásia Ocidental,América do Sul,etc desde 2006.
3. As amostras podem ser entregues dentro de 15 dias após a confirmação
4. 45 dias como o período de produção e entrega após a confirmação da ordem.
5. 10,000 meters of pre-honed seamless steel tubes at stock.
6. 200 sizes can be offered from ID:30mmxWT:5mm to ID:400mmxWT:25milímetro
7. Inspeção de terceiros, como:TUV,BV,SGS,etc aceito
8. Equipe profissional auxilia suas necessidades especiais de tubo.
9. Outros tubos relacionados:chrome plated steel bars,chrome plated steel tubes;etc
Em caso de dúvidas,você é mais do que bem-vindo para entrar em contato sales@grandsteeltube.com
| Steel grade :ST45(20#) ck45(45#) ST52(16Mn) 27SiMn 25Mn 34CrMo4 | ||||||
| Processing | Cylinder diameter/mm | Comprimento | Straightness | Size accuracy | Espessura da parede | Inner bore |
| roughness | ||||||
| Cold-drawn | ID30~ID400 | ≤12m | 0.3~0.8mm/m | EN10305-1 | ±10% | 0.8~1.6um |
| SRB or Honed tube | ID30~ID250
ID250~ID400 |
≤10m | 0.3~0.8mm/m | H8~H9~H10 | ±10% | 0.3~0.8um |
| Propriedade Mecânica | ||||||
| Material | Tensile | Yield | Elongação | Hardness | ||
| força | força | |||||
| 20# | 530 N/mm2 | 505N/mm2 | 12% | 175HB | ||
| 45# | 660 N/mm2 | 630N/mm2 | 6% | 207HB | ||
| ST52 | 595 N/mm2 | 570N/mm2 | 9% | 190HB | ||
| 27SiMn | 840 N/mm2 | 805N/mm2 | 7.5% | 230HB | ||
| Honed tube size tolerance | ||||||
| ID size | ID deviation (milímetro) | |||||
| H7 | H8 | H9 | H10 | |||
| 30 | +0.021 | +0.033 | +0.052 | +0.084 | ||
| 0 | 0 | 0 | 0 | |||
| >30~50 | +0.025 | +0.039 | +0.062 | +0.100 | ||
| 0 | 0 | 0 | 0 | |||
| >50~80 | +0.030 | +0.046 | +0.074 | +0.120 | ||
| 0 | 0 | 0 | 0 | |||
| >80~120 | +0.035 | +0.054 | +0.087 | +0.140 | ||
| 0 | 0 | 0 | 0 | |||
| >120~180 | +0.040 | +0.063 | +0.100 | +0.160 | ||
| 0 | 0 | 0 | 0 | |||
| >180~250 | +0.046 | +0.072 | +0.115 | +0.185 | ||
| 0 | 0 | 0 | 0 | |||
| >250~315 | +0.052 | +0.081 | +0.130 | +0.210 | ||
| 0 | 0 | 0 | 0 | |||
| >315~400 | +0.0527 | +0.089 | +0.140 | +0.230 | ||
| 0 | 0 | 0 | 0 | |||
Em caso de dúvidas,você é mais do que bem-vindo para entrar em contato sales@grandsteeltube.com
Produtos relacionados
-
Leia maisVisualização RápidaTubos de cilindro inoxidável
O tubo do cilindro pneumático do aço inoxidável é produzido por inoxidável sem costura ou soldado através de um processo de produção cuidadoso.
Grau Principal:TP304/304L, TP316/316L,1.4301,1.4304,1.4401,1.4404
Tamanho:OD9.53mm-131mm com WT: 0.635-5milímetro. 3M ou 6M como o comprimento.
ASTM A269 e com a tolerância de ID H10 ou H11.
A rugosidade OD ≤Ra 0.8 e ID ≤8 Ra 0.4
Grande pode atender as propriedades mecânicas como dureza,
Resistência à tração, resistência ao escoamento, alongamento e ovalidade etc.
Em caso de dúvidas,entre em contato sales@grandsteeltube.com
-
Leia maisVisualização RápidaCK45 Chrome Plated Bar
-
Leia maisVisualização Rápida4140 hard chrome plated rod
Aço 4140 is AISI standard grade, it is a kind of alloy structural steel, equivalent to China standard GB 42CrMo.
SAE 4140 alloy steel has high fatigue strength and low notch sensitivity, high low temperature impact toughness, no obvious temper brittleness, and is mainly used in the quenched and tempered state. It is used to manufacture high-strength parts and parts with large cross-sections and other stress-bearing components under impact load. Such as high strength Hydraulic cylinder rods, penaumatic cylinder rods, the transmission eccentric shaft of the horizontal forging machine, the crankshaft of the forging press, etc.4140 chrome plated rod is manufactured through SAE 4140 steel bar, by using high precision centerless grinding and polishing methods, and then chrome plated to a min. plating thickness of 20 microns (0.0008″), 25 microns (0.001″), or other. The chrome plating layer provides corrosion resistance and a highly reflective appearance.
4140 chrome plated rods are used widely by the hydraulic industries and pneumatic industries, and is also widely usually used for applications where high yield strength and tensile strength is required.
-
Leia maisVisualização RápidaHydraulic Cylinder Tubes
Applications of Hydraulic honed tubing
Honed tubing and SRB tubes (skived and roller burnished tubes) are mostly used as cylinder tube, such as hydraulic cylinder tube and pneumatic cylinder tubing, which are widely used for manufacturing and repairing hydraulic cylinders and pneumatic cylinders. As honed tube usually has very accuracy dimension tolerance and good surface smoothness, so this product is also used in applications where precision dimension or high smooth surface is need.
Em caso de dúvidas,entre em contato sales@grandsteeltube.com
-
Leia maisVisualização RápidaOil Cylinder Steel Tubes
Applications of Hydraulic honed tubing
Honed tubing and SRB tubes (skived and roller burnished tubes) are mostly used as cylinder tube, such as hydraulic cylinder tube and pneumatic cylinder tubing, which are widely used for manufacturing and repairing hydraulic cylinders and pneumatic cylinders. As honed tube has very accuracy dimension tolerance and good surface smoothness, so this product is also used in applications where precision dimension or high smooth surface is need.
Em caso de dúvidas,entre em contato sales@grandsteeltube.com
-
Leia maisVisualização RápidaAir Cylinder Tubing
The common alloy No. of air cylinder tubing is 6063 e 6061. They are both great in formability, weldability, and corrosion resistance together with excellent appearance.
Grand also capable of extruding other alloys no. for air cylinder tubing, for example, 7000 series, 5000 series, 3000 series, 2000 series, e 1000 series, consult our expert engineers to get more info regarding this extraordinary aluminum alloy no.
-
Leia maisVisualização RápidaChrome Plated Round Bars
Chrome plated round bar is mostly designed to be used for hydraulic piston rod and pneumatic piston rod manufacturing and repairing. So some people also may call this product hydraulic cylinder rod approximately.
Contudo, besides the above, chrome plated rods can also be used in applications where high performance surface finishing and high accuracy dimension tolerance are required.
Here below is the application list of the chrome rods:
- Hydraulic cylinders (chrome plated piston rods)
- Pneumatic cylinders / air cylinders (chrome plated piston rods)
- Guide rods for plastic manufacturing machine and hydraulic machinery
- Rollers for machines, such as packing machine rollers, printing machine rollers
- Shaft for machinery, such as Textile machinery center axle, Transport machinery center axle, etc.
- Ejector rods for injection molding machines
- Vibration absorbers and pistons for some industrial machinery.
Em caso de dúvidas,entre em contato sales@grandsteeltube.com