Titanium bar, rod specifications
- Beschrijving
- Onderzoek
Standaard | ASTM B348/ASME SB348, ASTMF67, ASTM F136, ISO-5832-2(3), AMS4928, MIL-T-9047G, JIS etc |
Graad | ▲ Gr1, Gr2, Gr3, Gr4▲ Gr5 (Ti-6Al-4V)
▲ Gr7 (Ti-0.2Pd) ▲ Gr9 (Ti-3Al-2.5V) ▲ Gr12 (Ti-0.3Mo-0.8Ni) ▲ Gr23 (Ti-6Al-4V ELI) |
Titanium Round Bar Size | Diameter: 2~300mm |
Titanium Square Bar Size | 5*5mm~100*100mm Thickness: 2~300mm |
Titanium Flat Bar Size | Breedte: 10~300mm Thickness: 2~300mm |
Titanium Hex Bar Size | 2~300mm |
Lengte | 100~3000mm |
Technical | Forged, Machining |
Delivery state | Hot working state(R), Cold working state(Y), Annealing state(M) |
Oppervlak | Acid surface, Polishing, Sand Blasting Finished, Helder, Gepolijst |
Vorm | Rond, Flat, Vierkant, Hexagonal, Rechthoek |
Titanium Rod Form | Rond, Vierkant, Hex(A/F), Rechthoek, Billet |
Toepassing | Metallurgy, elektronica, geneeskundig, chemisch, petroleum, medicijn, Aerospace, enz. |
What is a titanium bar, rod?
Titanium rod is a metal bars crafted from Titanium Ore. It has good performance of wear-resisting and anti-corrosion. It has low density and high strength, making it an essential structural material for industrial production.
Production Process of Titanium Bar, rod
What are the advantages of using a titanium bar, rod?
- Small density, hoge specifieke sterkte
The density of titanium metal is 4.51g/CM3, which is higher than aluminum and lower than steel, copper and nickel, but the specific strength is the first metal.
- High corrosion resistance
In the air or oxygen-containing media, the surface of titanium generates a dense, strong adhesion, inert oxide film, which protects the titanium substrate from corrosion.
- High resistance to damping
Titanium metal is subject to mechanical vibration, electrical vibration, compared with steel, copper metal, its own vibration decay time is long
- Tensile strength is close to its yield strength
Due to the yield limit of titanium and the modulus of elasticity ratio is large, so that the titanium molding rebound ability is large
- Healthy to Body
Not contain harmful metals has good compatibility with your body’s blood and tissues.
What are the quality application standards for titanium bar, rod?
ROD, BAR & FORGINGS | ||
Maten: Bar & RodFull Range of sizes in all grades |
GRADE | SPECIFICATIONS |
6AL-4V, 6AL-4V ELI | AMS-4928, 4930,4965, 4967, MIL-T-9047, AMS-T-9047, ASTM-F-367 |
|
6AL-2SN-4ZR-2MO | AMS04975, MIL-T-9047, AMS-T-9047 | |
6AL-6V-25SN | AMS-4978, MIL-T-9047, AMS-T-9047 | |
5AL-2.55N | AMS-4926, 4966, MIL-T-9047, AMS-T-9047, B50TF22 | |
8AL-1MO-IV | AMS-4972, 4973, MIL-T-9047, AMS-T-9047 | |
CP-GRADES 1,2,3,4,7 | AMS-4921, MIL-9047, ASTM-B-348, ASTM-F-67 |
Standard specifications for titanium bar
- Commercially Pure Titanium
- Titanium legering
Grade of titanium
- Ti Grade 1 is an unalloyed, low strength Ti product containing low oxygen with high formability; this Ti grade is used in airframes, Warmtewisselaars, and desalination units.
- Ti Grade 2 is an unalloyed, medium-strength titanium product. This titanium grade is used in airframes, aircraft engines, and marine parts; good weldability and corrosion resistance are its distinguishing characteristics.
- Ti Grade 3 is an unalloyed, hoge sterkte, titanium product providing excellent corrosion resistance and good weldability. This titanium grade is primarily used in airframe and aircraft engine parts.
- Ti Grade 4 is the highest strength pure unalloyed titanium product. This titanium grade is used almost exclusively for airframe, aircraft engine parts, marinier, surgical implants, hydraulic tubing. Good formability and corrosion resistance are its hallmark.
- Ti Grade 5 (6AL-4V) is an alloyed titanium product containing 6% Aluminum and 4% Vanadium; is a medium strength product. This titanium grade is predominantly used in airframe and turbine engine parts; and for use in surgical implants.
- Titanium 6AL – 4V ELI is an alloyed titanium product containing 6% Aluminum and 4% Vanadium, ELI (Extra Low Interstitial).
- 6AL–2Sn–4Zr–2Mo (6-2-4-2)is an alloyed titanium product containing 6% Aluminium, 2% Tin, 4% Zirkonium, 2% Molybdenum.
- 6AL–6V–2Sn (6-6-2)is an alloyed titanium product containing 6% Aluminium, 6% Vanadium, 2% Tin.
- 5AL–2.5Sn & ELI (5-2.5)is an alloyed titanium product containing 5% Aluminum and 2.5% Tin. Also ELI (Extra Low Interstitial).
- 8AL–1V–1Mo (8-1-1)is an alloyed titanium product containing 8% Aluminium, 1% Molybdenum and 1% Vanadium.
Different forms of titanium bar, rod
Application of titanium bar, rod
Titanium alloy bars, especially Ti-6AL-4V alloy bars, titanium connecting rods are used in automobile engines, which are not only wear-resistant but also light in weight, reducing the weight of automobiles
Subsequently, titanium was used in titanium spring seats, silencers, and exhaust gas tanks. Natuurlijk, titanium rods are used as stirring rods and fasteners in the chemical industry because of their corrosion resistance and wear resistance
Bovendien, the superior performance of titanium has also attracted the attention of the medical profession, contributing to the development of medicine and human health.
- Electric power, Energy, and Seawater desalination
- Chemical Plants and electrolysis
- PHE, Aircraft and Jet Engines
- Automobiles, consumer appliances, sports, and medical care
- Civil Engineering and architectural materials
Common titanium and zirconium bar applications include:
- Fabrication to produce fasteners, flanges, and other heavy-duty machine components
- Dental implant studs and medical screws
- Consumer products including jewelry and tools
Shafts and impellers for mixing equipment
What are the available surface finish options for the titanium bar?
- Zwart
- Bright Polished
- Rough Turned
- Matt Finish
Product quality control
- ▲ Chemical analysis – to define element contents such as C, N, O, H, Fe, Al, V.
- ▲ Mechanical properties – tension test including tensile, yield, elongation, reduction of area
- ▲ Dimensional tolerance – diameter and length tolerance check
- ▲ Surface contamination – imperfections removed
- ▲ Nondestructive test – 100% NDT for inspecting inner cracks, pores, and other defections
Physical Properties:
Graad | Status | Treksterkte | Vloeigrens | Verlenging | Area of Reduction | ||
Ksi | Mpa | Ksi | Mpa | % | |||
GR1 |
Gegloeid
|
35 | 20 | 25 | 170 | 24 | 30 |
GR2 | 50 | 345 | 40 | 275 | 20 | 30 | |
GR3 | 65 | 450 | 55 | 380 | 18 | 30 | |
GR4 | 80 | 550 | 70 | 483 | 15 | 25 | |
TI-6AL-4VELI | 125 | 860 | 115 | 795 | 10 | 25 | |
Ti6AL7Nb | 130.5 | 900 | 116.8 | 800 | 10 | 25 | |
Ti13Nb13Zr | ageing125Solid 800
Not annealed 800
|
860
550
550 |
105500
500 |
725345
345 |
815
8 |
1530
15 |
Chemical Requirements of Titanium Rod
N | C | H | Fe | O | Al | V | Pa | Mo | Ni | Ti | |
Gr. 1 | 0.03 | 0.08 | 0.015 | 0.2 | 0.18 | / | / | / | / | / | Remaining |
Gr. 2 | 0.03 | 0.08 | 0.015 | 0.3 | 0.25 | / | / | / | / | / | Remaining |
Gr. 3 | 0.05 | 0.08 | 0.015 | 0.3 | 0.35 | / | / | / | / | / | Remaining |
Gr. 4 | 0.05 | 0.08 | 0.015 | 0.5 | 0.4 | / | / | / | / | / | Remaining |
Gr. 5 | 0.05 | 0.08 | 0.015 | 0.4 | 0.2 | 5.5~6,75 | 3.5~4,5 | / | / | / | Remaining |
Gr. 7 | 0.03 | 0.08 | 0.015 | 0.3 | 0.25 | / | / | 0.12~ 0,25 | / | / | Remaining |
Gr. 9 | 0.03 | 0.08 | 0.015 | 0.25 | 0.15 | 2.5~3,5 | 2.0~3,0 | / | / | / | Remaining |
Gr.12 | 0.03 | 0.08 | 0.015 | 0.3 | 0.25 | / | / | / | 0.2~0,4 | 0.6~0,9 | Remaining |
Considerations when buying titanium bar, rod
- Finished products are smooth, have no peeling, no cracks, small tolerance
- superior performance, hoge sterkte, high-temperature resistance
- fine length, high hardness, no cracks
- stable material performance, quality assurance
- no oil, scratches, knocks on the surface
- side cutting surface is flat and smooth
Our Additional Services
Grand Titanium offers a complete range of services, starting from basic cutting and processing to more complex and bespoke solutions. This range includes:
- Plasma Cutting
- GAS Cutting
- Laser Cutting
- Waterjet Cutting
- Shear Cutting
- Bending, Machining & Fabrication
- Polishing
Why Choose Titanium bar, rod from us?
Grand Titanium is a global professional titanium bar, rod manufacturers, and supplier in China, all our products are manufactured in accordance with ASTM, AMS, and ISO international standards. and we make it easy for you to find the product you need with quick shipments!
- Quality Advantage
Located in Changzhou,Jiangsu, Grand has been supplying metallic products for 17 jaren. Material ration in line with international standards.
- Equipment Advantages
Complete supporting equipment, the introduction of the industry’s top roller drawing equipment, inspection and testing equipment to ensure production output and quality stability.
- Price Advantages
Source factory production, direct sales in reasonable price
Gerelateerde producten
-
Lees meerSnel overzicht
Roestvrije staaf
Een roestvrijstalen stafmateriaal wordt vaak gebruikt voor productielijnmachines of in andere industriële omgevingen waar duurzaamheid vereist is. Roestvrijstalen ronde staaftypes zijn te vinden in veel verschillende vormen, zoals zeshoek, vierkant, of ronde staven. Roestvrij stafmateriaal is een materiaal dat niet corrosief is, Corrosiebestendig, en duurzaam. Het kan worden gebruikt in verschillende industrieën, zoals de auto-industrie, Aerospace, constructie, en productie.
Roestvrijstalen stafmateriaal is het type roestvrij staal van de hoogste kwaliteit in de industrie. Ze zijn gemaakt van hoogwaardige materialen waardoor ze bestand zijn tegen corrosie en andere omgevingsomstandigheden. Het roestvrijstalen stafmateriaal heeft ook een grotere treksterkte dan andere soorten roestvrij staal.
Roestvrijstalen ronde staafproducten of ronde staven worden vaak gebruikt voor het vervaardigen van producten zoals autovelgen, motorfiets velgen, Fiets velgen, en meer. Dit soort staven wordt meestal gemaakt door platen roestvrij staal op te rollen tot lange buizen voordat ze aan de uiteinden aan elkaar worden gelast om ronde staven of ronde staven te maken die in kleinere stukken kunnen worden gesneden
-
Lees meerSnel overzicht
Titanium Strip
Titanium strip wordt geproduceerd uit de titanium plaat. Gewoonlijk koudgewalst de titaniumplaat door een kleine molen met gloeien voor meerdere keren, vervolgens snijschaar tot titanium strips volgens de eisen van de klant. De geavanceerde apparatuur, Rollend proces, Procescontrole, Gloeitemperatuur- en retourtijdregeling zorgden voor gladheid en afwerking, de kwaliteit van onze producten effectief verbeterd.
-
Lees meerSnel overzicht
Koperen spoelen
Het lijkt misschien dat een koperen spoel een eenvoudig stuk opgerolde draad is dat kan worden opgewonden en gebruikt. Zoals bij elke vorm van industrieel product, Koperen spoelen moeten nauwkeurig worden ontworpen om in een toepassing te passen. Het wikkelproces moet nauwkeurig worden voltooid om de juiste afstand tussen de draden en de diameter van de opening te garanderen.
Elk product dat koperen spoelen gebruikt, vereist dat een bepaald aantal windingen wordt gemaakt om de juiste hoeveelheid weerstand te bieden. Onnauwkeurige berekeningen kunnen leiden tot inefficiëntie en mogelijk falen van de spoel of het apparaat. Om deze reden, garanderen de engineers van Metal Associates dat ze de specificatie van een toepassing nauwkeurig hebben onderzocht, zodat de diameter, Afstand, Dikte van de draad, en het aantal windingen komt exact overeen met het ontwerp van het product waar de koperen spoel zal worden gebruikt.
-
Lees meerSnel overzicht
Koperen strips
Koperen strips hebben een hoge elektrische en thermische geleidbaarheid, Daarom zijn koperen strips het beste voor transformatorwikkeling.
Wat meer is, Koperen strips brengen warmte effectiever over dan andere metalen strips.
Koperen strips zijn kneedbaarder en hebben een hoge treksterkte. Corrosiebestendigheid, hoge mate stabiliteit, en warmteafvoer van koperen strips zijn superieur aan andere metalen.
Koperstrips worden meestal gebruikt in de elektrische en elektronische sector omdat koper niet-magnetisch en vonkvrij is. Koperstrips worden meestal gebruikt in warmtewisselaars, transformatoren wikkelen, Condensatoren, en bliksemafleiders.
De dikte van de koperstrook varieert van 0,03 mm tot 3,0 mm. Koperen strips kunnen worden vervaardigd in verschillende breedtes en diktes volgens de eisen van de klant.
Als u vragen heeft, neem dan gerust contact op met sales@grandsteeltube.com
-
Lees meerSnel overzicht
Roestvrij stalen platen
Roestvrij stalen platen & Platen zijn gemaakt van austenitisch staal en bevatten voornamelijk chroom en nikkel met toevoeging van zeldzame elementen die een hoge corrosiebestendigheid bieden, hoge treksterkte, Uitstekende impact & taaiheid en weerstand tegen hoge temperaturen bij cryogene temperaturen. Bovendien, deze SS-bladen & Platen zijn zeer gewild in verschillende industrieën, zoals de chemische industrie & Voedselverwerking, Warmtewisselaars, vers & zoutwater mariene milieus, Auto's en meer.
-
Lees meerSnel overzicht
Messing Strips
Messing Strip heeft een hogere sterkte dan koper, goede elektrische en thermische geleidbaarheid, Hoge corrosiebestendigheid in de atmosfeer en zoet water, en goede plasticiteit, Gemakkelijke verwerking met koude en warme druk, Eenvoudig lassen, Smeden en vertinnen, Geen spanningscorrosie scheuren.
-
Lees meerSnel overzicht
Aluminium spoel
Aluminium spoel is een gewalst product, geproduceerd in een opgerolde vorm van een doorlopende band, en heeft een binnendiameter en buitendiameter. ID van 50mm naar 1000mm. Aluminiumlegering inclusief 1xxx, 2Xxx, 3Xxx, 4Xxx, 5Xxx, 6Xxx, 7Xxx, 8Xxx. Maar de meest voorkomende is 1050, 3003, 6061 en 5251 aluminium spoel. Dikte van 0.045-80mm, breedte van 60-2650mm. Gemeenschappelijke breedtes van aluminium spoel is 800mm,1000Mm, 1250Mm,1450mm en 1500mm.
Meerdere industrieën vertrouwen op aluminium spoelen voor een verscheidenheid aan toepassingen, zoals automotive, constructie, warmteoverdracht, medicijn, elektrisch, en voedingsindustrie. Vergeleken met andere materialen, aluminium is in veel gevallen een veel beter materiaal. Aluminium spoel kan worden geleverd met standaard molenafwerking, of het kan worden geborsteld, geruit, kleur gecoat, gesatineerd en geanodiseerd. Aluminiumplaat of aluminiumfolie kan in spoelen worden gesneden volgens de eisen van de klant.
-
Lees meerSnel overzicht
Aluminiumfolie
Aluminiumfolie is aluminium bereid in dunne metalen bladen met een dikte van minder dan 0,2 mm (7.9 Mils); dunnere meters tot 4 Micrometers worden ook vaak gebruikt. Standaard huishoudfolie is typisch 0.016 Mm (0.63 Mils) dik, en heavy-duty huishoudfolie is typisch 0.024 Mm (0.94 Mils). En de airconditionerfolie kan dunner zijn dan 0,0047 mm, en sommige voedselfolie dunner dan 0,002 mm. De folie is buigzaam en kan gemakkelijk om voorwerpen worden gebogen of gewikkeld. Dunne folies zijn kwetsbaar en worden soms gelamineerd met andere materialen zoals plastic of papier om ze sterker en bruikbaarder te maken. Het wordt industrieel gebruikt voor verschillende doeleinden, inclusief verpakking, Isolatie en transport. Thuis, Mensen gebruiken aluminiumfolie voor het bewaren van voedsel, om bakoppervlakken te bedekken en om voedsel in te pakken, zoals vlees, om te voorkomen dat ze vocht verliezen tijdens het koken.
-
Lees meerSnel overzicht
Messing plaat
Messing plaat op basis van elektrolytisch koper, Zink en sporenelementen als grondstof, door verwerking door ingot, Warm walsen, Koudwalsen, Warmtebehandeling, Reiniging van het oppervlak, stek, afwerking, en dan inpakken. Prestaties van materiaalprocessen, plasticiteit, Mechanische eigenschappen, corrosiebestendigheid, Prestaties en goed tin.
Het is op grote schaal gebruikt in elektrische, Automotive, communicatie, hardware, Decoratie en andere industrieën.
-
Lees meerSnel overzicht
Titanium folie
Titaniumfolie is een titanium plaat, strip, rol of plaat met een dikte van minder dan of gelijk aan 0,2 mm. De maximale breedte van gewalste titaniumfolie is ongeveer 600mm.
De breedte van de titaniumfolie wordt gesneden volgens de eisen van de gebruiker. Maar hoe breder de productie, hoe hoger de productiviteit.
Titaniumfolie wordt voornamelijk gebruikt in de lucht- en ruimtevaart, navigatie, kernmogendheid, elektronica, chemische industrie, petroleum, precisieproductie, medisch, farmaceutisch en ander aspect.
- DIN2391 Precisie Stalen Buis
- EN10305-1/4 Precisie stalen buis
- EN10305-2/3/5/6 Precisiebuizen
- SAE-serie precisiebuizen
- ISO8535-1 brandstofinjectiebuis
- Single/Doulbe Wand Bundy Tube
- Ketel & Druk stalen buizen
- Naadloze geslepen /SRB stalen buis
- Roestvrij capillaire stalen buizen
- Naadloze roestvrije buizen & Doedelzak
- Gelaste roestvrije buizen & Doedelzak
- Injectie & Controle lijn buizen
- Nikkel legering buizen & Doedelzak
- Non-ferro capillaire buizen
- Aluminium buizen & Doedelzak
- Messing buizen & Doedelzak
- Koperen buizen & Doedelzak
- Titanium buizen & Doedelzak
- Geëxtrudeerde/gelaste vinbuis
- Non-ferro precisiebuis
- Speciaal gevormde stalen buizen
- Metallic spoel/folie/blad/strip