저합금 U 벤드 튜브

U 벤딩 튜브는 냉간 가공 방식으로 수행되며 클라이언트 도면에 따라 필요한 굽힘 반경으로 수행됩니다.. U-벤드 튜브/파이프는 고수율 및 저수율 스테인리스강을 포함하는 광범위한 파이프 재료로 제조할 수 있습니다., 합금강, 탄소강,모넬 , 인코넬, 하 스텔로이,이중 , 슈퍼 듀플렉스,타이타늄,구리 합금 및 Cr-Ni 합금. 일반적으로 이음매없는 튜브로 제조 된 U- 벤드, 우리의 클라이언트의 특정한 필요조건에 의하여 간격과 크기의 점에서 더 주문을 받아서 만들어질 수 있습니다. 튜브 번들을 쉽게 조립할 수 있습니다..

Grand는 보일러와 같은 다양한 응용 분야를 위해 다양한 산업 분야의 U 벤드 튜브 파이프를 제공합니다., 콘덴서, 슈퍼 히터,열교환기용 튜브 번들, 쿨러/인터쿨러, 냉각기, 등등. 이들은 비료 공장과 같은 이종 산업에서도 사용되고 있습니다., 설탕 산업, 철강 공장,기름 & 가스 플랜트, 화학 & 석유화학 플랜트, 정 련 소, 발전소, 재생 에너지 발전소 등.

카테고리: 보일러 & 압력 스틸 튜브, 압출/용접 핀 튜브

묘사
문의

Production process:

straight pipe – bending before 100% flaw detection – reliable bending machine and precision bending mould – bending after the U-shaped part of the electric heating stress relief annealing – bending after 100% water pressure

What special:

All the above mentioned material can be supplied:in straight length U-bent finned with low fins

These pipe/tube Bend are seamless,by Large-radius Pipe Bend for pneumatic conveyors.

Pipe Bend are absolutedly wrinkle-free,no start-up bulges,Extremely low ovality Pipe Bend.

Visually aesthetic surface,Deburred sawing edges,No scratching or scoring.

Leg extension each side, Easy installation,Safe for use with food.

Steel and alloy steel U bent Tube standard and material grade:

ASTM A213 T5 T11 T12 T22 T9 T91 alloy steel U tube for Heat Exchanger Tube Boiler Condensers Super Heaters Coolers/Inter-coolers Chiller.

ASTM/ASME A/SA179 Steel Seamless U Tube bundles,for Heat Exchanger Tube Boiler Condensers Super Heaters Coolers/Inter-coolers Chiller.

ASTM/ASME A/SA192 Seamless Steel U Tubes tube bundles.

ASTM/ASME A/SA210 GrA1 C Seamless Steel U Tubes for Boiler, Superheater, Heat-Exchanger, and Condenser U Tubes, 튜브 번들.

JIS G3461 STB340 STB410 STB510 Seamless Steel U Tubes, tube bundles for Heat Exchanger,콘덴서,보일러.

JIS G3462 STBA12 STBA13 STBA20 STBA22 STBA24 Seamless Steel U Tubes, tube bundles for Heat Exchanger,콘덴서

DIN17175 St35.8 St45.8 15Mo3 13CrMo44 10CrMo910Seamless Steel U Tubes, tube bundles for Heat Exchanger Condenser

EN10216-1 P195TR1 P235TR1 P265TR1Seamless Steel U Tubes, tube bundles for Heat ExchangerCondenser

EN10216-2 P195GH P235GH P265GHSeamless Steel U Tubes, tube bundles for Heat Exchanger Condenser

ASTM A179	It is used for heat exchanger, condenser and similar heat conveying equipments
ASTM A213	It is used for boiler and super heater min wall thickness seamlless steel ferrite and austenitic steel tube and heat exchanger austenitic steel tube.
ASTM A210	It is used for boiler and boiler flue tubes, including safe end, vault and supporting tube, and superheater wall thickness min or medium carbon steel tube.
JIS G3461/2	It is used for boiler and heat exchanger tube inside&outside.
EN10216-1/2	It is applicable to manufacture pipelines, vessel, equipment, pipe fittings and steel structure in high pressure condition.
DIN17175	Its used for the pipelines of boiler industry.

화학 성분:

표준	급	화학 성분(%)							기계적 성질
표준	급	C	Si	미네소타	P	S	크롬	모	인장 강도(음파)	항복 강도(음파)	신장(%)
ASTM A179	A179	0.06-0.18	–	0.27-0.63	≤0.035	≤0.035	–	–	≥325	≥180	≥35
ASTM A213	T11	0.05-0.15	0.50-1.00	0.30-0.60	≤0.025	≤0.025	1.00-1.50	0.44-0.65	≥415	≥205	≥30
	T12	0.05-0.15	≤0.50	0.30-0.61	≤0.025	≤0.025	0.80-1.25	0.44-0.65	≥415	≥220	≥30
	T22	0.05-0.15	≤0.50	0.30-0.60	≤0.025	≤0.025	1.90-2.60	0.87-1.13	≥415	≥205	≥30
	T91	0.05-0.15	≤0.50	1.00-1.50	≤0.035	≤0.035	–	–	≥585	≥415	≥30
ASTM A210	A-1	0.13-0.19	≥0.1	0.45-0.65	≤0.035	≤0.035	–	–	≥415	≥255	≥30
ASTM A210	C	0.18-0.24	≥0.1	0.80-1.10	≤0.035	≤0.035	–	–	≥485	≥275	≥30
JIS G3461	STB340	≤0.18	≤0.35	0.30-0.60	≤0.035	≤0.035	–	–	≥340	≥175	≥35
	STB410	≤0.32	≤0.35	0.30-0.80	≤0.035	≤0.035	–	–	≥410	≥255	≥25
	STB510	≤0.25	≤0.35	1.00-1.50	≤0.035	≤0.035	–	–	≥510	≥295	≥25
JIS G3462	STBA12	0.10-0.20	0.10-0.50	0.30-0.80	≤0.035	≤0.035	–	0.45-0.65	≥380	≥205	≥30
	STBA13	0.15-0.25	0.10-0.50	0.30-0.80	≤0.035	≤0.035	–	0.45-0.65	≥410	≥205	≥30
	STBA20	0.10-0.20	0.10-0.50	0.30-0.60	≤0.035	≤0.035	0.50-0.80	0.40-0.65	≥410	≥205	≥30
	STBA22	≤0.15	≤0.50	0.30-0.60	≤0.035	≤0.035	0.80-1.25	0.45-0.65	≥410	≥205	≥30
	STBA24	≤0.15	≤0.50	0.30-0.60	≤0.030	≤0.030	1.90-2.60	0.87-1.18	≥410	≥205	≥30

표준	급	화학 성분(%)							기계적 성질
표준	급	C	Si	미네소타	P	S	크롬	모	인장 강도(음파)	항복 강도(음파)	신장(%)
DIN17175	St35.8	≤0.17	0.10-0.35	0.40-0.80	≤0.030	≤0.030	–	–	360-480	≥235	≥25
	St45.8	≤0.21	0.10-0.35	0.40-1.20	≤0.030	≤0.030	–	–	410-530	≥255	≥21
	15Mo3	0.12-0.20	0.10-0.35	0.40-0.80	≤0.030	≤0.030	–	0.25-0.35	450-600	≥270	≥20
	13CrMo44	0.10-0.18	0.10-0.35	0.40-0.70	≤0.030	≤0.030	0.70-1.10	0.45-0.65	440-590	≥290	≥20
	10CrMo910	0.08-0.15	≤0.50	0.40-0.70	≤0.030	≤0.030	2.00-2.50	0.90-1.20	450-600	≥280	≥18
EN10216-1	P195TR1	≤0.13	≤0.35	≤0.70	≤0.025	≤0.020	≤0.30	≤0.08	320-440	≥195	≥27
	P235TR1	≤0.16	≤0.35	≤1.20	≤0.025	≤0.020	≤0.30	≤0.08	360-500	≥235	≥25
	P265TR1	≤0.20	≤0.40	≤1.40	≤0.025	≤0.020	≤0.30	≤0.08	410-570	≥265	≥21
EN10216-2	P195GH	≤0.13	≤0.35	≤0.70	≤0.025	≤0.020	≤0.30	≤0.08	320-440	≥195	≥27
	P195GH P235GH P265GH	≤0.16	≤0.35	≤1.20	≤0.025	≤0.020	≤0.30	≤0.08	360-500	≥235	≥25
	P265GH	≤0.20	≤0.40	≤1.40	≤0.025	≤0.020	≤0.30	≤0.08	410-570	≥265	≥23

보일러 튜브,High pressure boiler tubes are used in high temperature and high pressure conditions. Steel tubes are subject to oxidation and corrosion under the action of high temperature flue gas and water vapor. The steel tube is required to have high lasting strength, high oxidation resistance corrosion performance and good stability.

저합금 U 벤드 튜브

저합금 U 벤드 튜브

접촉 우리

관련 상품

스테인레스 핀 튜브

세로 핀 튜브

레이저 핀 튜브

Seamless Steel Tube A179

압출 핀 튜브

A210 Seamless Boiler Steel Tube

구리 합금 U 벤드 튜브

EN10216-1/DIN1629 Seamless Steel Tubes

100Cr6 베어링 강관

티타늄 U 벤드 튜브