- 묘사
- 문의
탄소 및 합금 전기 저항 용접에 대한 ASTM A513 표준 (전기 저항 용접법) 기계 응용 분야를 위한 튜빙. Type1으로 분류할 수 있습니다. (용접되는 열간압연 전기 저항), 형 2 (냉간 압연) 및 유형 5(맨드릴 위에 그려짐) 그것의 처리 가공에 따르면. 그려진 맨드릴 (DOM) 튜빙은 동심도가 우수합니다., 그것의 ERW 제품 보다는 매끄러운 외벽과 안 벽 간격, 자동차에 자주 사용됩니다., 가전 및 건설 산업.
제품 이름: ASTM A513 Type5 기계적 등급 , DOM 원형 스틸 튜브
크기(밀리미터): O. D.: 10.0-168.0 W. T.: 1.0-10.0밀리미터 L: 최대 12000mm
DOM 스틸 튜빙, 내부 용접 이음새가 제거되어 매끄러운 내부 표면을 만드는 용접된 기계식 원형 강관입니다.. DOM 원형 강관은 보다 정확한 치수 정확도와 공차를 갖는 튜브를 생산하기 위해 맨드릴 위에 그려졌습니다, 그리고 매우 부드러운 insde 및 외부 마감. DOM 강관은 더 높은 품질을 요구하는 더 많은 스트레스가 많은 응용 분야에 이상적입니다., 기계적 충전 용량 증가, 고름, 힘, 그리고 건전성.
사양: ASTM A513 유형 5, 1020, 1045, 4130 기계적인 급료
응용 프로그램: 경주용 자동차 프레임, 롤 케이지, 오토바이 프레임,스핀 들, 롤러, 샤프트, 엔진 마운트, 부싱, 실린더, 프랙탈, 등.
작업성: 용접하기 쉬움, 삭감, 형태와 기계.
강철 급료 | C 최대 |
미네소타 | P 최대 |
S 최대 |
Si 최대 |
크롬 최대 |
모 |
1008 | 0.10 | 0.30-0.50 | 0.035 | 0.035 | – | – | – |
1010 | 0.08-0.13 | 0.30-0.60 | 0.035 | 0.035 | – | – | – |
1018 | 0.14-0.20 | 0.60-0.90 | 0.035 | 0.035 | – | – | – |
1020 | 0.18-0.23 | 0.30-0.60 | 0.035 | 0.035 | – | – | – |
1026 | 0.22-0.28 | 0.60-0.90 | 0.035 | 0.035 | – | – | – |
1035 | 0.32-0.38 | 0.60-0.90 | 0.035 | 0.035 | – | – | – |
1045 | 0.37-0.44 | 0.60-0.90 | 0.035 | 0.035 | – | – | – |
4130 | 0.28-0.33 | 0.40-0.60 | 0.035 | 0.035 | 0.15-0.35 | 0.80-1.10 | 0.15-0.25 |
4140 | 0.38-0.43 | 0.75-1.00 | 0.035 | 0.035 | 0.15-0.35 | 0.80-1.10 | 0.15-0.25 |
기계적 성질:
강철 급 |
항복 강도 | 인장 강도 | 신장 | RB | RB | ||
한국항공우주연구원 | 음파 | KSI (케이시) | 음파 | % | 분 | .max | |
싱크 드로잉 튜빙 | |||||||
1008 | 38 | 262 | 48 | 331 | 8 | 65 | |
1010 | 40 | 276 | 50 | 345 | 8 | 65 | |
1020 | 50 | 345 | 60 | 414 | 8 | 70 | |
1026 | 55 | 379 | 70 | 483 | 7 | 77 | |
1035 | 70 | 483 | 80 | 552 | 7 | 82 | |
4130 | 50 | 345 | 70 | 483 | 20 | 100 | |
4140 | 65 | 448 | 90 | 621 | 20 | 105 |
강철 급 |
항복 강도 | 인장 강도 | 신장 | RB | RB | ||
한국항공우주연구원 | 음파 | KSI (케이시) | 음파 | % | 분 | .max | |
튜빙 정규화 | |||||||
1008 | 23 | 159 | 38 | 262 | 30 | 65 | |
1010 | 25 | 172 | 40 | 276 | 30 | 65 | |
1020 | 35 | 241 | 50 | 345 | 25 | 75 | |
1026 | 40 | 276 | 60 | 414 | 25 | 80 | |
1035 | 45 | 310 | 65 | 448 | 20 | 85 |
강철 급 |
항복 강도 | 인장 강도 | 신장 | RB | RB | |||
한국항공우주연구원 | 음파 | KSI (케이시) | 음파 | % | 분 | .max | ||
Mandrel-DrawnStress-Relieved 튜빙 | ||||||||
1008 | 45 | 310 | 55 | 379 | 12 | 68 | ||
1010 | 45 | 310 | 55 | 379 | 12 | 68 | ||
1020 | 55 | 379 | 65 | 448 | 10 | 75 | ||
1026 | 65 | 448 | 75 | 517 | 10 | 80 | ||
1035 | 75 | 517 | 85 | 586 | 10 | 85 | ||
4130 | 80 | 552 | 90 | 621 | 10 | 87 | ||
4140 | 95 | 655 | 105 | 724 | 10 | 90 |
ASTM A513 Type 5 Round Steel Tube – DOM Characteristics
ASTM A513 Type 5 Round Steel Tube – DOM is a Drawn Over Mandrel (DOM) tubing product which has closer OD/ID/Wall Tolerances than ERW products. Produced from 1020 그리고 1026 강철.
DOM 원형 스틸 튜브, is a welded mechanical round steel tube with the internal weld seam removed creating a smooth internal surface.DOM is actually not a type of tubing, but a process that is applied to tubing after it is initially constructed. It is Drawn Over a Mandrel…which “cold works” it, giving it more exact dimensions relative to the inside and outside diameters, a smoother finish, and better alignment of the crystal lattice structure.
Although it is almost always referred to as a SEAMLESS tube, technically it is NOT seamless tubing, and it started life as some sort of EW (electric welded) tubing. During the manufacturing process, the weld line becomes nearly undetectable, thus it is referred to as SEAMLESS. It is considered a high strength, high quality tube, and is normally constructed from SAE 1020 또는 1026 steel ASTM A513,Type 5.
DOM round steel tube produce a tube having more exact dimensional accuracy and tolerances, and a very smooth inside and outside finish. DOM round steel tube is ideal for more stressful applications requiring higher quality, increased mechanical properties, 고름, 힘, and soundness DOM is commonly used in the manufacturing of race cars and motorcycle frames.
1020 is normally used in the manufacturing of small-diameter or thin-wall DOM steel tube. 1026 grade is normally used in the manufacturing of DOM over 2″ 최저가, with walls heavier than .156″.
- 사양: ASTM A513 Type 5, 1020/1026 기계적인 급료
- 응용 프로그램: 경주용 자동차 프레임, 롤 케이지, 오토바이 프레임, 스핀 들, 롤러, 엔진 마운트,부싱, 프랙탈, Hydraulic Cylinders, Axles, High Speed Shafts, Barrels, Bearings, Spacers, and many other machined tubular parts etc.
- 작업성: Easy to Weld, Cut, Form and Machine
- 기계적 성질: Brinell = 80, Tensile = 80,000 +/-, Yield = 70,000 +/-
Benefits of Drawn Over Mandrel (DOM) Round Mechanical Tubing:
- Uniform wall thickness with close OD and ID tolerances
- Uniform grain structure and controlled hardness
- High Tensile and Yield Strength
- Smooth and Clean OD and ID surfaces
- Excellent machining characteristics