Titanium coils
Because of the poor thermal conductivity of pure titanium, the emulsion with good lubrication effect and excellent cooling performance is required in the rolling process, and the rolling speed should not be too fast, in order to prevent the high temperature of pure titanium and cause the phenomenon of “sticking roller”, and “sticking roller” resulting in rough surface of titanium and poor quality. The residual water and oil on the surface of the titanium strip decompose during the annealing process, which affects the partial pressure of oxygen in the furnace and causes the decomposition reaction to go in the opposite direction, forming oxidation on the surface of the titanium strip and affecting the annealing quality. Because titanium strip annealing before full degreasing cleaning and drying plate surface. The degreasing speed of titanium strip is generally 20m/min, and the speed is adjusted according to the surface quality of the titanium strip after degreasing. Straightening is to ensure the flatness of the product plate.
- 形容
- 仕様
- 照会
Manufacturing process
Cold rolled titanium coil due to different production processes (or finished product surface) generally divided into cold rolled pickling surface titanium coil and cold rolled glossy titanium coil.
The manufacturing process of cold rolled pickling surface titanium coil of XRUN is: sponge titanium — melting — forging — 間 圧延 — heat treatment — shot blasting — hot rolled pickling white roll — cold rolling — heat treatment — shot blasting — pickling — edge cutting — inspection — cold rolled pickling white roll — packing and storage.
production process
In the production process, because the product is rolled twice, the oxide scale will be produced. Two heat treatment and shot blasting pickling are the treatment of the oxide scale on the surface of the product, so as to better ensure the quality of the product. Cold rolled pickling surface titanium coil is generally used in aerospace, industry and marine engineering. Compared with the former, cold rolled glossy titanium coil is more widely used. Similarly, there are two more steps in the production process of cold rolled titanium coil with glossy surface than pickling surface: degreasing annealing and straightening.
Because of the poor thermal conductivity of pure titanium, the emulsion with good lubrication effect and excellent cooling performance is required in the rolling process, and the rolling speed should not be too fast, in order to prevent the high temperature of pure titanium and cause the phenomenon of “sticking roller”, and “sticking roller” resulting in rough surface of titanium and poor quality. The residual water and oil on the surface of the titanium strip decompose during the annealing process, which affects the partial pressure of oxygen in the furnace and causes the decomposition reaction to go in the opposite direction, forming oxidation on the surface of the titanium strip and affecting the annealing quality. Because titanium strip annealing before full degreasing cleaning and drying plate surface. The degreasing speed of titanium strip is generally 20m/min, and the speed is adjusted according to the surface quality of the titanium strip after degreasing. Straightening is to ensure the flatness of the product plate.
Product parameters
積 | 仕様(ミリメートル} | 等級 | 標準 | 引張強度 | 降伏強度 | 伸長 |
pickling surface | 幅(1.0~4.0) x (50~1200) x L | GR1/
GR2/ GR3/ GR4 |
ASTM B265 ASME SB265 |
≥240/
≥345/ ≥450/ ≥550 |
138~310/
275~450/ 380~550/ 483~655 |
≥24/
≥20/ ≥18/ ≥15 |
glossy surface | 幅(0.2~3.0) x (50~1200) x L |
The titanium coil is mainly used as a container for heating and cooling. titanium coil fixation is divided into two kinds of detachable and non-detachable, This depends on the medium's corrosion of the titanium coil. But mainly based on removable type, convenient maintenance and cleaning of titanium coil.
Application features
Excellent corrosion resistance in many media
Smooth surface, clean layer
低密度, high strength and light weight
低密度, 高い比強度
The density of metallic titanium is 4.51g/cm3, which is higher than that of aluminum and lower than that of steel, 銅, and nickel, but the specific strength is at the top of the metal.
耐食性
Titanium is a very active metal with a low equilibrium potential and a high tendency for thermodynamic corrosion in media. しかし, titanium is actually very stable in many media. 例えば, titanium is resistant to corrosion in media such as oxidative, neutral and weak reducibility. This is because titanium and oxygen have a great affinity. In air or oxygen-containing medium, a dense, strong and inert oxide film is formed on the surface of titanium to protect the titanium matrix from corrosion. Even if it is due to mechanical wear, it will quickly heal or regenerate. This shows that titanium is a metal with a strong tendency to passivation. The oxide film of titanium below the temperature of 315°C always maintains this characteristic.
In order to improve the corrosion resistance of titanium, surface treatment technologies such as oxidation, electroplating, plasma spraying, ion nitriding, ion implantation, and laser processing have been studied. Titanium oxide film played a role in enhancing protection and obtaining desired corrosion resistance. A series of corrosion-resistant titanium alloys such as titanium-molybdenum, titanium-palladium, and titanium-molybdenum-nickel have been developed to meet the needs of metal materials in the production of sulfuric acid, hydrochloric acid, methylamine solution, high-temperature wet chlorine, and high-temperature chloride. Titanium-32-molybdenum alloys are used in titanium castings. チタン-0.3 molybdenum-0.8 nickel alloys are used in environments where crevice corrosion or pitting corrosion frequently occurs. チタン-0.2palladium alloys were used locally in titanium equipment, and good results were obtained.
Good heat resistance
The new titanium alloy can be used long-term at 600 °C or higher.
Low temperature resistance
Low temperature titanium alloy represented by titanium alloys TA7 (Ti-5Al-2.5Sn), TC4 (Ti-6Al-4V) and Ti-2.5Zr-1.5Mo, etc.Its strength increases with decreasing temperature, but the plasticity changes are not large.It maintains good ductility and toughness at -196-253°C and avoids cold brittleness. It is an ideal material for cryogenic vessels and tanks.
Strong anti-damping performance
After metal titanium is subjected to mechanical vibration and electric vibration, its own vibration decay time is the longest compared with steel and copper metal. The use of this property of titanium can be used as a tuning fork, a medical ultrasonic vibrator vibration element, and an advanced sound speaker vibration film.
Non-magnetic, 無毒
Titanium is a non-magnetic metal, it will not be magnetized in a large magnetic field, non-toxic and has good compatibility with human tissues and blood, so it is used by the medical community.
Tensile strength is close to its yield strength
This property of titanium shows that the yield strength ratio (tensile strength/yield strength) is high, indicating that the metal titanium material is poor in plastic deformation during forming. Since the ratio of the yield limit of titanium to the elastic modulus is large, the resilience of titanium when molded is large.
Good heat transfer performance
Although the thermal conductivity of titanium metal is lower than that of carbon steel and copper, due to the excellent corrosion resistance of titanium, the wall thickness can be greatly reduced, and the heat exchange mode between the surface and steam is droplet condensation, which reduces the thermal group. Titanium surface without scaling can also reduce the thermal resistance, so that the heat transfer performance of titanium is significantly improved.
Low modulus of elasticity
The modulus of elasticity of titanium is 106.4 GMPa at room temperature, which is only 57% of steel.
Suction performance
Titanium is a chemically very reactive metal that reacts with many elements and compounds at high temperatures. Titanium inhalation mainly refers to reaction with carbon, hydrogen, nitrogen, and oxygen at high temperatures.
料
Can be divided into: TA1 [Content 99,6], TA2 [Content 99,5], TA9 [Titanium Palladium Alloy], TA10 [Ti-Mo-Ni alloy
チタン
The density of metallic titanium is 4.51g/cm3, which is higher than that of aluminum and lower than that of steel, 銅, and nickel, but the specific strength is at the top of the metal. 耐食性, titanium is a very active metal, its equilibrium potential is very low, the tendency of thermodynamic corrosion in the medium. しかし, titanium is actually very stable in many media. 例えば, titanium is resistant to corrosion in media such as oxidative, neutral and weak reducibility. This is because titanium and oxygen have a great affinity. In air or oxygen-containing medium, a dense, strong and inert oxide film is formed on the surface of titanium to protect the titanium matrix from corrosion. Even if it is due to mechanical wear, it will quickly heal or regenerate. This shows that titanium is a metal with a strong tendency to passivation. The oxide film of titanium below the temperature of 315°C always maintains this characteristic. In order to improve the corrosion resistance of titanium, surface treatment technologies such as oxidation, electroplating, plasma spraying, ion nitriding, ion implantation, and laser processing have been studied. Titanium oxide film played a role in enhancing protection and obtaining desired corrosion resistance. A series of corrosion-resistant titanium alloys such as titanium-molybdenum, titanium-palladium, and titanium-molybdenum-nickel have been developed for the production of sulfuric acid, hydrochloric acid, methylamine solution, high-temperature wet chlorine, and high-temperature chlorides, and for metal materials. Titanium castings use titanium-32 molybdenum alloys. チタン-0.3 molybdenum-0.8 nickel alloys are used for crevice corrosion or pitting environments. チタン-0.2 palladium alloys are used locally for titanium equipment. effect. Good heat resistance The new titanium alloy can be used long-term at 600°C or higher. Low-temperature-resistant titanium alloys such as titanium alloys TA7 (Ti-5Al-2.5Sn), TC4 (Ti-6Al-4V), and Ti-2.5Zr-1.5Mo, 等。, whose low-temperature titanium alloys increase in strength as the temperature decreases, Plasticity is not great. It maintains good ductility and toughness at -196-253°C and avoids cold brittleness. It is an ideal material for cryogenic vessels and tanks.
関連製品
-
続きを読みますクイックビュー
Stainless Steel Sheets
Stainless Steel Sheets & Plates are made up of austenitic steel mainly contain chromium and nickel with the addition of rare elements which offer high corrosion resistance, high tensile strength, excellent impact & toughness and high-temperature resistance at cryogenic temperatures. Moreover, these SS Sheets & Plates are highly demanded in various industries like chemical & 食品加工, heat exchangers, fresh & saltwater marine environments, automobiles and more.
-
続きを読みますクイックビュー
Titanium Foil
Titanium foil is a titanium plate, strip, roll or sheet with a thickness of less than or equal to 0.2mm. The maximum width of rolled titanium foil is about 600mm.
The width of the titanium foil is cut according to the requirements of the user.But the wider the manufacturing, the higher the productivity.
Titanium foil is mainly used in aerospace, navigation, nuclear power, electronics, chemical industry, petroleum, precision manufacturing, medical pharmaceutical and other aspects. -
続きを読みますクイックビュー
Brass Bar
-
続きを読みますクイックビュー
Stainless Steel Foil
Stainless steel foils are thin strips of stainless steel that are less than 0.2 mm in thickness and less than 300 mm in width.
Stainless steel foils offer a variety of advantages, including chemical stability, high strength-to-weight ratio, electrical insulation and corrosion resistance.
Stainless steel foil is used in the production of heat exchangers, capacitors and fuel cells; as well as in medical equipment and food processing machinery.
Stainless steel foils are a versatile material with many advantages. Its high corrosion resistance, good thermal and electrical conductivities and its ductility makes it an excellent choice for a wide range of applications.
Stainless steel foil is available in several different grades. These include austenitic series, ferritic series, martensitic series, duplex and super duplex series. Each grade has different alloying elements that contribute to the properties of the foil.
The most common grades of stainless steel foils are 304 そして 316. These grades are supplied in thicknesses ranging from 0.009mm to 0.3mm. Other grades of stainless steel foil are also available upon request including 409, 430 and duplex 2205.
-
続きを読みますクイックビュー
Copper Foil
Copper is a reddish brown metallic element with outstanding characteristics such as good ductility, 延性, heat and conductivity
Pure copper is a very soft and ductile metal To achieve the required performance, we can alloy with other metals Brass and bronze are widely used copper alloys
Copper foil is made of copper or copper alloy by hot rolling and cold rolling The thickness of copper foil ranges from 0.03mm to 0.2mm, and the width and length can be customized according to customer requirements
-
続きを読みますクイックビュー
Titanium Strip
Titanium strip is produced from the titanium sheet. Usually cold-rolled the titanium sheet by a small mill with annealing for several times, then slitting shear to titanium strips according to customer requirements. The advanced equipment, rolling process, process control, annealing temperature and return time control ensured its smoothness and finish, effectively improved the quality of our products.
-
続きを読みますクイックビュー
Titanium Sheet
Titanium plate has high corrosion resistance and specific strength, and is widely used in electric power, chemical industry, aviation parts, building materials, sports equipment, medical and other fields and is still expanding. From the point of view of use and manufacturing technology, titanium plate has low price, high performance, multiple functions, and easy production.
ご不明な点がございましたら,お気軽にお問い合わせください sales@grandsteeltube.com
-
続きを読みますクイックビュー
Stainless Bar
A stainless steel bar stock is often used for production line machinery or in other industrial settings where durability is required. Stainless steel round bar types can be found in many different shapes such as hexagon, 正方形, or round bars. Stainless bar stock is a material that is non-corrosive, corrosion resistant, and durable. It can be used in a variety of industries such as automotive, 航宇, construction, and manufacturing.
Stainless steel bar stock is the highest quality type of stainless steel in the industry. They are made with high-quality materials that make them resistant to corrosion and other environmental conditions. The stainless bar stock also has greater tensile strength than other types of stainless steel.
Stainless steel round rod products or round bars are commonly used for manufacturing products like car rims, motorcycle rims, bicycle rims, その他. These types of bars are typically made by rolling up sheets of stainless steel into long tubes before welding them together at the ends to create round rods or round bars that can be cut into smaller pieces
-
続きを読みますクイックビュー
Copper Sheet
Copper sheet is a very workable and malleable form of metal, high in electrical and thermal conductivity, and provides excellent corrosion resistance. A beautiful and versatile metal, copper has been utilized for thousands of years. Historically, it served as a favorite choice in making tools, vessels, and sculptures. Copper is also known for its beautiful patinas. When exposed, unsealed, to an outdoor environment, copper begins to oxidize. This exposure creates beautiful color variations in the form of a patina. The coloring of the patina will change and develop character over time while serving to protect the metal from deterioration. People will also create a patina quickly with the use of chemical mixtures that speed the process up and allow a patina to develop without outdoor exposure. Copper sheets can also be hammered, tooled, or embossed for added texture and decorative or functional appeal and come in many thicknesses from very thin copper foil to thick copper plate. It also comes in many alloys that blend other metals with copper. At Grand Copper, we sell pure copper -C110 (other alloys and tempers available upon request). This high purity provides the premium quality needed for projects and applications in a wide range of industries and uses. We take pride in providing the best material. Our high-quality, affordable material and friendly, first-rate customer service have made us a leader in the industry for over a decade.
-
続きを読みますクイックビュー
Copper Strips
Copper strips have high electrical and thermal conductivity, that’s why copper strips are the best for transformer winding.
What’s more, copper strips transfer heat more effectively than other metals strips.
Copper strips are more malleable and have high tensile strength. 耐食性, high degree stability, and heat dissipation of copper strips are superior to other metals.
Copper strips are mostly used in the electrical and electronics sectors because copper is non-magnetic and non-sparking. Copper strips are mostly used in heat exchangers, transformers winding, コンデンサー, and lightning conductors.
Copper strip thickness range from 0.03mm to 3.0mm. Copper strips can be manufactured in different widths and thicknesses per the customer’s requirement.
ご不明な点がございましたら, お気軽にお問い合わせください sales@grandsteeltube.com
- DIN2391精密鋼管
- EN10305-1 / 4精密鋼管
- EN10305-2 / 3 / 5 / 6精密チューブ
- SAEシリーズ精密チューブ
- ISO8535-1燃料噴射管
- シングル/ドルベウォールバンディチューブ
- ボイラー & 圧力鋼管
- シームレスホーニング /SRB スチールチューブ
- ステンレスキャピラリー鋼管
- シームレスステンレスチューブ & パイプ
- 溶接ステンレスチューブ & パイプ
- 注射 & コントロールラインチューブ
- ニッケル合金チューブ & パイプ
- 非鉄キャピラリーチューブ
- アルミチューブ & パイプ
- 真鍮チューブ & パイプ
- 銅管 & パイプ
- チタンチューブ & パイプ
- 押し出し/溶接フィンチューブ
- 非鉄精密チューブ
- 特殊形状鋼管
- 金属コイル/フォイル/シート/ストリップ