Stainless Steel Strip is an austenitic chromium-nickel-manganese stainless steel that offers electromagnetic properties like electrical resistivity, magnetic permeability & electrical conductivity and Young’s Modulus of Elasticity. We offer these stainless steel strips in various material grades such as Stainless Steel 304 Strips, Acciaio inossidabile 310 Strips, Acciaio inossidabile 316 Strips, Acciaio inossidabile 904 Strips and many more.
Titanium Foil
Titanium foil is a titanium plate, strip, roll or sheet with a thickness of less than or equal to 0.2mm. The maximum width of rolled titanium foil is about 600mm.
The width of the titanium foil is cut according to the requirements of the user.But the wider the manufacturing, the higher the productivity.
Titanium foil is mainly used in aerospace, navigation, nuclear power, electronics, chemical industry, petroleum, precision manufacturing, medical pharmaceutical and other aspects.
- Descrizione
- Indicazioni
- Inchiesta
Titanium foil – Preparation Method
The raw material for industrially producing titanium is mainly rutile ore or high titanium slag (containing 92% or more of Ti02). Titanium sponge production process is based on high titanium slag and petroleum coke as raw material for the production of titanium tetrachloride. Titanium sponge can be obtained by reducing refined titanium tetrachloride with magnesium or sodium in a rare gas stream.
Magnesium reduction distillation method: the proportion of high titanium slag and petroleum coke is 100 (30~33), and the mixture is broken to less than 160 mesh, and sent to the fluidized bed chlorination furnace, and the chlorine gas is passed through the bottom of the furnace, uniformly enter the reaction section of the furnace body, and react with the mixed material of high titanium slag and petroleum coke. The reaction temperature was about 850 °c. The generated titanium tetrachloride gas is discharged from the top of the furnace and enters two separator dust collectors connected in series, so that high boiling points such as iron trichloride, iron dichloride, manganese dichloride and aluminum trichloride mixed in the titanium tetrachloride gas are deposited at the bottom of the separator dust collector. The gas was reintroduced into the two sets of condensers connected in series, and the titanium tetrachloride gas was cooled to below 136 ° C. To obtain a crude titanium tetrachloride solution. The low-boiling matters, such as silicon tetrachloride, therein are distilled off by means of a float valve column distillation. After heating to 140 ° C. In a copper chip Tower, the gasified titanium tetrachloride is passed into a copper chip Tower, and the contained impurity vanadyl trichloride is reduced by copper to a low-valent chloride of vanadium. The purified titanium tetrachloride gas discharged from the top of the column was subjected to a reduction reaction with magnesium in a rare gas stream at about 900 ° C. To obtain titanium sponge. Since the resulting sponge-like titanium also contains magnesium chloride as a by-product and unreacted magnesium, the sponge-like titanium must be placed under a vacuum of 0.1 A 10-3 Babbo, the impurities were separated from the titanium by heating to about 1000 °c.
Titanium foil – Use
titanium alloy has high strength, a large number of structural materials used in the manufacture of military supersonic aircraft, compression Components of jet engines, components of aircraft frames, housings, fire barriers, rivets, structural components of air transport equipment, there is a “space metal”; Military facilities and military ships armored plate and propeller blades. In the civilian industry, titanium and its alloys can be used in the manufacture of various pumps, valvolame, filtration, evaporation equipment wire mesh and various machine parts. Powdered titanium can be used as an oxygen scavenger in the electron tube manufacturing process.
Titanium foil – Safety
hazard code: flammable solid. GB4.1 class 41505. UN NO.2678 (strontium powder). IMDG CODE P. 4177, Class 4.1. Each batch of product should be divided into galvanized iron barrels lined with plastic film, and the weight of each (piece) of the drum is 70~250, and it is sealed with a large open cover. Magnesium reduction titanium must be evacuated and filled with argon in the barrel after packaging. Titanium can be protected without argon by sodium reduction. “Moisture-proof” shall be indicated on the outside of the packaging barrel. Should be stored in a ventilated, dry warehouse. Shall not be stacked in the open air, and shall not be mixed with acid, alkali and other corrosive substances. During the transport process, it is necessary to prevent rain and humidity. During loading and unloading, care should be taken to prevent breakage of the packaging barrel. Titanium tetrachloride used in the production process can make people suffering from chronic bronchitis, chronic hypertrophic rhinitis, pharyngitis. Autonomic nervous system dysfunction, increased tendon reflexes, tremor of the eyelids and hands, hyperhidrosis. Thermal burns were more difficult to heal when exposed to 10% titanium tetrachloride solution. When exposed to titanium tetrachloride smoke, wear an industrial filter gas mask. To protect the eyes and skin. If you accidentally spatter on the skin, wipe it off with cotton gauze and then wash it thoroughly with water. Production equipment should be closed and the workshop should be well ventilated. Dry powder and dry sand can be used to put out the fire, and water, foam and carbon dioxide are strictly prohibited. In case of high heat or intense combustion, explosion may be caused by water suppression.
Titanium foil is a titanium plate, strip, roll or sheet with a thickness of less than or equal to 0.2mm. The maximum width of rolled titanium foil is about 600mm.
The width of the titanium foil is cut according to the requirements of the user.But the wider the manufacturing, the higher the productivity.
Titanium foil is mainly used in aerospace, navigation, nuclear power, electronics, chemical industry, petroleum, precision manufacturing, medical pharmaceutical and other aspects.
Titanium alloy has high strength and low density, good mechanical properties, good toughness and corrosion resistance.
The two most prominent advantages of titanium are high specific strength and strong corrosion resistance, which determines that titanium must have broad application prospects in aerospace, weaponry, energy, chimico, metallurgy, construction and transportation. The rich reserves provide a resource base for the wide application of titanium.
Descrizione | Titanium foil |
Materiale | Gr1, Gr2, Gr3,Gr4,Gr5, Gr7, Gr6,Gr9, Gr11, Gr12 ,Gr16, Gr17,Gr25TA0,TA1,TA2,TA5,TA6,TA7,TA9,TA10,TB2,TC1,TC2,TC3,TC4 |
Standard | ASTM B265,ASME SB265,DIN17851,TiA16Zr5Mo1.5,JIS4100-2007,GB3461-2007 |
Grandezza | Spessore:0.05-0.2mmWidth:3-600millimetro
Lunghezza:according to requirements |
MOQ (in inglese) | 100 Kilogram/Kilogrames |
Equepment used | CNC lathes, Milling machine, Machining Center,Thread rolling machine Magnetic needle polishing machine |
Tratti somatici | 1.high corrosion resistance2.low density
3.non-ferromagnetic 4.good biocompatibility |
Pacco | Standard export package,suit for all kinds of transport ,o come richiesto. |
Applicazione | 1.Based on High intensity,titanium products tensile strength can be up to 180Kg/mm².2.Titanium and titanium alloy in aviation industry, is called “space metal”; Inoltre,
in the shipbuilding industry, chemical industry, manufacturing machinery parts, telecommunications equipment, hard alloy, etc have increasingly extensive application 3.Inoltre, because of the titanium alloy with the human body has very good compatibility, so the titanium alloy can also be artificial bone. |
Composizione chimica:
Composizione (%) | C | N | Fe | O | H | Ale | V | Ti |
GR1 | ≤0.08 | ≤0.03 | ≤0.20 | ≤0.18 | ≤0.015 | – | – | Bal. |
GR2 | ≤0.08 | ≤0.03 | ≤0.30 | ≤0.25 | ≤0.015 | – | – | Bal. |
GR5 | ≤0.10 | ≤0.05 | ≤0.30 | ≤0.20 | ≤0.015 | 5.50-6.80 | 3.50-4.50 | Bal. |
Tratti somatici
|
The density of titanium is 4.506-4.516g/cm^3, melting point is 1668, boiling point is 3535. Therefore Titanium have low
weight,excellent high strength and nonmagnetic festures, low density, excellent corrosion resistance features, high specific strength and high temperature resistance features, so it is widely used in chemical industry field, medical field, electronics manufacture, mechanical parts field, automobile industry, and aerospace field, and so on. |
Prodotti correlati
-
Leggi di piùVista Rapida
Bobina in acciaio inossidabile
La bobina in acciaio inossidabile può essere suddivisa in bobina di acciaio inossidabile laminata a freddo e bobina di acciaio inossidabile laminata a caldo in base ai diversi processi produttivi.
Secondo i materiali, Possono essere suddivisi in austenite, martensite, ferrite e duplex.
I gradi di bobine in acciaio inossidabile di uso comune sono spesso rappresentati da simboli digitali.
Ci sono 200 serie, 300 serie, 400 Serie e serie duplex.
304, 304L, 316 e le bobine in acciaio inossidabile 316L sono i gradi più popolari ed economici di acciai inossidabili.
Bobine in acciaio inox 304/304L e bobine in acciaio inox 316/316L, insieme alle bobine duplex in acciaio inossidabile offrono una buona resistenza alla corrosione a molti ambienti chimici e alle esposizioni marine e industriali.
-
Leggi di piùVista Rapida
Nastri in acciaio inossidabile
Hot Rolled Stainless Steel Strips are produced from hot rolling billets or slabs and then use a cold rolling process. These processes improve strips mechanical properties such as stiffness coefficient and flexibility. Cold Rolled Stainless Steel Strips are obtained from annealed and pickled by cold rolling on polished rolls. As per the required thickness, cold rolling requires a number of passes through mill to effect reduction.
We supply SS Strips in various industries including food industries, chimico, elettrico, generator, shaft, cement & gas industries. The offered these Stainless Steel Strips in standards as well as customized dimensions as per the client’s requirement.
-
Leggi di piùVista Rapida
Stainless Bar
A stainless steel bar stock is often used for production line machinery or in other industrial settings where durability is required. Stainless steel round bar types can be found in many different shapes such as hexagon, quadrato, or round bars. Stainless bar stock is a material that is non-corrosive, corrosion resistant, and durable. It can be used in a variety of industries such as automotive, aerospaziale, costruzione, and manufacturing.
Stainless steel bar stock is the highest quality type of stainless steel in the industry. They are made with high-quality materials that make them resistant to corrosion and other environmental conditions. The stainless bar stock also has greater tensile strength than other types of stainless steel.
Stainless steel round rod products or round bars are commonly used for manufacturing products like car rims, motorcycle rims, bicycle rims, e altro ancora. These types of bars are typically made by rolling up sheets of stainless steel into long tubes before welding them together at the ends to create round rods or round bars that can be cut into smaller pieces
-
Leggi di piùVista Rapida
Stainless Steel Foil
Stainless steel foils are thin strips of stainless steel that are less than 0.2 mm in thickness and less than 300 mm in width.
Stainless steel foils offer a variety of advantages, including chemical stability, high strength-to-weight ratio, electrical insulation and corrosion resistance.
Stainless steel foil is used in the production of heat exchangers, capacitors and fuel cells; as well as in medical equipment and food processing machinery.
Stainless steel foils are a versatile material with many advantages. Its high corrosion resistance, good thermal and electrical conductivities and its ductility makes it an excellent choice for a wide range of applications.
Stainless steel foil is available in several different grades. These include austenitic series, ferritic series, martensitic series, duplex and super duplex series. Each grade has different alloying elements that contribute to the properties of the foil.
The most common grades of stainless steel foils are 304 e 316. These grades are supplied in thicknesses ranging from 0.009mm to 0.3mm. Other grades of stainless steel foil are also available upon request including 409, 430 and duplex 2205.
-
Leggi di piùVista Rapida
Titanium Sheet
Titanium plate has high corrosion resistance and specific strength, and is widely used in electric power, chemical industry, aviation parts, building materials, sports equipment, medical and other fields and is still expanding. From the point of view of use and manufacturing technology, titanium plate has low price, high performance, multiple functions, and easy production.
In caso di domande,Non esitate a contattare sales@grandsteeltube.com
-
Leggi di piùVista Rapida
Lamina di rame
Il rame è un elemento metallico bruno rossastro con caratteristiche eccezionali come una buona duttilità, duttilità, Calore e conducibilità
Il rame puro è un metallo molto morbido e duttile Per ottenere le prestazioni richieste, possiamo legare con altri metalli L'ottone e il bronzo sono leghe di rame ampiamente utilizzate
Il foglio di rame è realizzato in rame o lega di rame mediante laminazione a caldo e laminazione a freddo Lo spessore del foglio di rame varia da 0,03 mm a 0,2 mm, e la larghezza e la lunghezza possono essere personalizzate in base alle esigenze del cliente
-
Leggi di piùVista Rapida
Bobine di rame
Può sembrare che una bobina di rame sia un semplice pezzo di filo arrotolato che può essere avvolto e messo in uso. Come per qualsiasi forma di prodotto industriale, Le bobine di rame devono essere progettate con precisione per adattarsi a un'applicazione. Il processo di avvolgimento deve essere completato con precisione per garantire la giusta distanza tra i fili e il diametro dell'apertura.
Ogni prodotto che utilizza bobine di rame richiede che venga effettuato un certo numero di giri per fornire la giusta quantità di resistenza. Calcoli imprecisi possono portare a inefficienza e possibile guasto della bobina o del dispositivo. Per questo motivo, gli ingegneri di Metal Associates garantiscono di aver esaminato attentamente le specifiche di un'applicazione in modo tale che il diametro, spaziatura, spessore del filo, e il numero di giri corrisponde esattamente al design del prodotto in cui verrà utilizzata la bobina di rame.
-
Leggi di piùVista Rapida
Bobina di alluminio
Bobina di alluminio è un prodotto laminato, prodotto in forma arrotolata di un nastro continuo, e ha un diametro interno e un diametro esterno. ID da 50mm a 1000mm. Grado di lega di alluminio incluso 1xxx, 2Xxx, 3Xxx, 4Xxx, 5Xxx, 6Xxx, 7Xxx, 8Xxx. Ma il più comune è 1050, 3003, 6061 e 5251 bobina di alluminio. Spessore da 0,045-80 mm, larghezza da 60-2650mm. Larghezze comuni della bobina di alluminio è 800mm,1000millimetro, 1250millimetro,1450mm e 1500mm.
Diversi settori si affidano alle bobine di alluminio per una varietà di applicazioni, come il settore automobilistico, costruzione, trasferimento di calore, farmaceutico, elettrico, e industria alimentare. Rispetto ad altri materiali, L'alluminio è un materiale di gran lunga superiore in molti casi. La bobina di alluminio può essere fornita con finitura standard del mulino, oppure può essere spazzolato, quadrettato, rivestito di colore, satinato e anodizzato. Lamiera di alluminio o foglio di alluminio può essere tagliato in bobine secondo i requisiti del cliente.
-
Leggi di piùVista Rapida
Barra in titanio
-
Leggi di piùVista Rapida
Lamiera di rame
La lamiera di rame è una forma di metallo molto lavorabile e malleabile, alta conduttività elettrica e termica, e fornisce un'eccellente resistenza alla corrosione. Un metallo bello e versatile, Il rame è stato utilizzato per migliaia di anni. Storicamente, È servito come scelta preferita nella creazione di strumenti, Vasi, e sculture. Il rame è anche noto per le sue bellissime patine. Quando esposto, Sigillata, ad un ambiente esterno, Il rame inizia ad ossidarsi. Questa esposizione crea bellissime variazioni di colore sotto forma di patina. La colorazione della patina cambierà e svilupperà il carattere nel tempo mentre serve a proteggere il metallo dal deterioramento. Le persone creeranno anche rapidamente una patina con l'uso di miscele chimiche che accelerano il processo e consentono a una patina di svilupparsi senza esposizione all'aperto.. Le lamiere di rame possono anche essere martellate, Lavorata, o goffrato per una maggiore consistenza e un aspetto decorativo o funzionale e sono disponibili in molti spessori da fogli di rame molto sottili a lastre di rame spesse. Inoltre è disponibile in molte leghe che fondono altri metalli con il rame. Al Grand Copper, vendiamo rame puro -C110 · (Altre leghe e tempere disponibili su richiesta). Questa elevata purezza fornisce la qualità premium necessaria per progetti e applicazioni in una vasta gamma di settori e usi. Siamo orgogliosi di fornire il miglior materiale. La nostra alta qualità, Materiale accessibile e amichevole, Un servizio clienti di prim'ordine ci ha reso leader nel settore per oltre un decennio.
- DIN2391 Tubo d'acciaio di precisione
- EN10305-1/4 Tubo d'acciaio di precisione
- EN10305-2/3/5/6 Tubi di precisione
- Tubi di precisione serie SAE
- ISO8535-1 tubo di iniezione carburante
- Singolo/Doulbe Wall Bundy Tube
- Caldaia & Tubi in acciaio a pressione
- Tubo d'acciaio levigato / SRB senza saldatura
- Tubi in acciaio inossidabile capillare
- Tubi inossidabili senza saldatura & Cornamusa
- Tubi inossidabili saldati & Cornamusa
- Iniezione & Tubi della linea di controllo
- Tubi in lega di nichel & Cornamusa
- Tubi capillari non ferrosi
- Tubi in alluminio & Cornamusa
- Tubi in ottone & Cornamusa
- Tubi di rame & Cornamusa
- Tubi in titanio & Cornamusa
- Tubo alettato estruso/saldato
- Tubo di precisione non ferroso
- Tubi speciali in acciaio sagomati
- Bobina metallica / lamina / foglio / striscia