Titanium Strip
Titanium strip is produced from the titanium sheet. Usually cold-rolled the titanium sheet by a small mill with annealing for several times, then slitting shear to titanium strips according to customer requirements. The advanced equipment, rolling process, process control, annealing temperature and return time control ensured its smoothness and finish, effectively improved the quality of our products.
- Deskripsi: __________
- Penyelidikan
Titanium strip is produced from the titanium sheet. Usually cold-rolled the titanium sheet by a small mill with annealing for several times, then slitting shear to titanium strips according to customer requirements. The advanced equipment, rolling process, process control, annealing temperature and return time control ensured its smoothness and finish, effectively improved the quality of our products.
Spesifikasi
Derajat | Status | Spesifikasi | ||
Gr1,Gr2,Gr4,Gr5,Gr7,Gr9,Gr11,
Gr12,Gr16,Gr23 |
Hot Rolled(R)
Cold Rolled(Y) Annealed(M) Solution treatment(ST) |
Ketebalan(Mm) | Width(Mm) | Panjangnya(Mm) |
0.2~2.0 | 10~500 | ≥500 |
Chemical composition
Derajat | Chemical composition, weight percent (%) | ||||||||||||
C
(≤) |
O
(≤) |
N
(≤) |
H
(≤) |
Fe
(≤) |
Al | V | Pd | Ru | Ni | Mo | Other Elements
Maks. setiap |
Other Elements
Maks. seluruh |
|
Gr1 | 0.08 | 0.18 | 0.03 | 0.015 | 0.20 | — | — | — | — | — | — | 0.1 | 0.4 |
Gr2 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | — | — | — | — | — | — | 0.1 | 0.4 |
Gr4 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | — | — | — | — | — | — | 0.1 | 0.4 |
Gr5 | 0.08 | 0.20 | 0.05 | 0.015 | 0.40 | 5.5~6.75 | 3.5~4.5 | — | — | — | — | 0.1 | 0.4 |
Gr7 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | — | — | 0.12~0.25 | — | 0.12~0.25 | — | 0.1 | 0.4 |
Gr9 | 0.08 | 0.15 | 0.03 | 0.015 | 0.25 | 2.5~3.5 | 2.0~3.0 | — | — | — | — | 0.1 | 0.4 |
Gr11 | 0.08 | 0.18 | 0.03 | 0.15 | 0.2 | — | — | 0.12~0.25 | — | — | — | 0.1 | 0.4 |
Gr12 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | — | — | — | — | 0.6~0.9 | 0.2~0.4 | 0.1 | 0.4 |
Gr16 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | — | — | 0.04~0.08 | — | — | — | 0.1 | 0.4 |
Gr23 | 0.08 | 0.13 | 0.03 | 0.125 | 0.25 | 5.5~6.5 | 3.5~4.5 | — | — | — | — | 0.1 | 0.1 |
Physical properties
Derajat | Physical properties | ||||||||
Tensile strength Min | Yield strength
(0.2%, offset) |
Elongasi
in 50mm Min (%) |
Bend Test (Radius of Mandrel) | ||||||
ksi | Mpa | Min | .max | <1.8mm
In thickness |
1.8mm~4.57mm
In thickness |
||||
ksi | Mpa | ksi | Mpa | ||||||
Gr1 | 35 | 240 | 20 | 138 | 45 | 310 | 24 | 1.5T | 2T |
Gr2 | 50 | 345 | 40 | 275 | 65 | 450 | 20 | 2T | 2.5T |
Gr4 | 80 | 550 | 70 | 483 | 95 | 655 | 15 | 2.5T | 3T |
Gr5 | 130 | 895 | 120 | 828 | — | — | 10 | 4.5T | 5T |
Gr7 | 50 | 345 | 40 | 275 | 65 | 450 | 20 | 2T | 2.5T |
Gr9 | 90 | 620 | 70 | 483 | — | — | 15 | 2.5T | 3T |
Gr11 | 35 | 240 | 20 | 138 | 45 | 310 | 24 | 1.5T | 2T |
Gr12 | 70 | 483 | 50 | 345 | — | — | 18 | 2T | 2.5T |
Gr16 | 50 | 345 | 40 | 275 | 65 | 450 | 20 | 2T | 2.5T |
Gr23 | 120 | 828 | 110 | 759 | — | — | 10 | 4.5T | 5T |
Toleransi (Mm)
Ketebalan | Thickness tolerance | Width tolerance | Length tolerance |
0.1~0.15 | ±0.015 | ±0.5 | ±10.0 |
0.15~0.2 | ±0.02 | ±0.5 | ±10.0 |
0.2~0.3 | ±0.03 | ±0.5 | ±10.0 |
0.3~0.5 | ±0.05 | ±1.0 | ±15.0 |
0.5~1.0 | ±0.07 | ±1.0 | ±15.0 |
1.0~1.5 | ±0.09 | ±1.5 | ±15.0 |
1.5~2.0 | ±0.12 | ±1.5 | ±15.0 |
Testing
Chemical composition test
Physical properties test
Appearance defects inspection
Ultrasonic flaw detection
Metallography detection
Kemasan
In order to avoid the titanium strip has any collision in transit or damage, usually coiled and wrapped with pearl cotton (expandable polyethylene), then packed into wooden case.
Produk Terkait
-
Baca Lebih LanjutTampilan Cepat
Stainless Bar
A stainless steel bar stock is often used for production line machinery or in other industrial settings where durability is required. Stainless steel round bar types can be found in many different shapes such as hexagon, lapangan, or round bars. Stainless bar stock is a material that is non-corrosive, corrosion resistant, and durable. It can be used in a variety of industries such as automotive, aerospace, construction, and manufacturing.
Stainless steel bar stock is the highest quality type of stainless steel in the industry. They are made with high-quality materials that make them resistant to corrosion and other environmental conditions. The stainless bar stock also has greater tensile strength than other types of stainless steel.
Stainless steel round rod products or round bars are commonly used for manufacturing products like car rims, motorcycle rims, bicycle rims, dan lainnya. These types of bars are typically made by rolling up sheets of stainless steel into long tubes before welding them together at the ends to create round rods or round bars that can be cut into smaller pieces
-
Baca Lebih LanjutTampilan Cepat
Copper Coils
It may seem that a copper coil is a simple piece of coiled wire that can be wound and put to use. As with any form of industrial product, copper coils have to be precisely engineered to fit an application. The winding process has to be completed with precision to ensure the proper distance between the wires and the diameter of the opening.
Each product that uses copper coils requires that a certain number of turns be made to provide the correct amount of resistance. Inaccurate calculations can lead to inefficiency and possible failure of the coil or device. For this reason, the engineers at Metal Associates guarantee that they have closely examined the specification of an application such that the diameter, spacing, wire thickness, and number of turns exactly matches the design of the product where the copper coil will be used.
-
Baca Lebih LanjutTampilan Cepat
Brass Bar
-
Baca Lebih LanjutTampilan Cepat
Stainless Steel Foil
Stainless steel foils are thin strips of stainless steel that are less than 0.2 mm in thickness and less than 300 mm in width.
Stainless steel foils offer a variety of advantages, including chemical stability, high strength-to-weight ratio, electrical insulation and corrosion resistance.
Stainless steel foil is used in the production of heat exchangers, capacitors and fuel cells; as well as in medical equipment and food processing machinery.
Stainless steel foils are a versatile material with many advantages. Its high corrosion resistance, good thermal and electrical conductivities and its ductility makes it an excellent choice for a wide range of applications.
Stainless steel foil is available in several different grades. These include austenitic series, ferritic series, martensitic series, duplex and super duplex series. Each grade has different alloying elements that contribute to the properties of the foil.
The most common grades of stainless steel foils are 304 dan 316. These grades are supplied in thicknesses ranging from 0.009mm to 0.3mm. Other grades of stainless steel foil are also available upon request including 409, 430 and duplex 2205.
-
Baca Lebih LanjutTampilan Cepat
Brass Strips
Brass Strip has higher strength than copper, good electrical and thermal conductivity, high corrosion resistance in the atmosphere and freshwater, and good plasticity, easy to cold and hot pressure processing, easy welding, forging and tin plating, no stress corrosion cracking.
-
Baca Lebih LanjutTampilan Cepat
Titanium Bar
-
Baca Lebih LanjutTampilan Cepat
Aluminium foil
Aluminium foil is aluminium prepared in thin metal leaves with a thickness of less than 0.2mm (7.9 mils); thinner gauges down to 4 micrometers are also commonly used. Standard household foil is typically 0.016 Mm (0.63 mils) thick, and heavy-duty household foil is typically 0.024 Mm (0.94 mils). And the air conditioner foil can be thinner than 0.0047mm, and some food foil thinner than 0.002mm. The foil is pliable and can be readily bent or wrapped around objects. Thin foils are fragile and are sometimes laminated with other materials such as plastics or paper to make them stronger and more useful. It’s used industrially for a variety of purposes, including packing, insulation and transportation. At home, people use aluminum foil for food storage, to cover baking surfaces and to wrap foods, such as meats, to prevent them from losing moisture while cooking.
-
Baca Lebih LanjutTampilan Cepat
Brass Coil
Brass coil has excellent plasticity (best in brass) and high strength, good machinability, easy to weld, very stable to general corrosion, but prone to corrosion cracking; brass coil is copper and the alloy of zinc is named for its yellow color.
The mechanical properties and wear resistance of the brass coil are very good, and can be used to manufacture precision instruments, ship parts, shells of guns, dll. Brass knocks up and sounds good, so instruments such as cymbals, cymbals, bells, and numbers are made of brass. According to the chemical composition, brass is divided into ordinary copper and special brass.
-
Baca Lebih LanjutTampilan Cepat
Titanium Sheet
Titanium plate has high corrosion resistance and specific strength, and is widely used in electric power, chemical industry, aviation parts, building materials, sports equipment, medical and other fields and is still expanding. From the point of view of use and manufacturing technology, titanium plate has low price, high performance, multiple functions, and easy production.
Jika ada pertanyaan,jangan ragu untuk menghubungi sales@grandsteeltube.com
-
Baca Lebih LanjutTampilan Cepat
Aluminium Coil
Aluminium coil is a rolled product, produced in a coiled form of a continuous strip, and has an inner diameter and outer diameter. ID from50mm to 1000mm. Aluminium alloy grade including 1xxx, 2xxx, 3xxx, 4xxx, 5xxx, 6xxx, 7xxx, 8xxx. But the most common is 1050, 3003, 6061 dan 5251 aluminum coil. Thickness from 0.045-80mm, width from 60-2650mm. Common widths of aluminum coil is 800mm,1000Mm, 1250Mm,1450mm and 1500mm.
Multiple industries rely on aluminium coils for a variety of applications, such as automotive, construction, heat transfer, pharmaceutical, electrical, and food industry. Compared to other materials, aluminum is a far superior material in many instances. Aluminum coil can be supplied with standard mill finish, or it can be brushed, checkered, color coated, satin-finished and anodized. Aluminium sheet or aluminium foil can be cut into coils as per client’s requirements.
- DIN2391 Tabung Baja Presisi
- EN10305-1/4 Tabung Baja Presisi
- EN10305-2/3/5/6 Tabung Presisi
- Tabung Presisi Seri SAE
- ISO8535-1 Tabung Injeksi Bahan Bakar
- Tabung Bundy Dinding Tunggal / Doulbe
- Ketel & Tabung Baja Tekanan
- Tabung Baja Seamless Honed / SRB
- Tabung Baja Kapiler Stainless
- Tabung Stainless Mulus & Pipa
- Tabung Stainless yang Dilas & Pipa
- Suntikan & Tabung Garis Kontrol
- Tabung Paduan Nikel & Pipa
- Tabung Kapiler Non-ferrous
- Tabung Aluminium & Pipa
- Tabung Kuningan & Pipa
- Tabung Tembaga & Pipa
- Titanium Tabung & Pipa
- Tabung Sirip Diekstrusi / Dilas
- Tabung Presisi Non-Ferrous
- Tabung Baja Berbentuk Khusus
- Koil Logam / Foil / Lembaran / Strip