A513 DOM teräsputki
ASTM A513 -standardi hiili- ja seoshitsatulle sähkövastukselle (ERW) Letkut mekaanisiin sovelluksiin. Se voidaan luokitella tyypiksi 1 (Kuumavalssattu sähkövastus hitsattu), Tyyppi 2 (Kylmävalssatut) ja tyyppi 5(Piirretty karan päälle) sen käsittelyprosessin mukaan. Piirretty kara (DOM) Letkulla on erinomainen samankeskisyys, sileä ulko- ja sisäseinämän paksuus kuin sen ERW-tuotteet, Käytetään usein autoteollisuudessa, Laite- ja rakennusteollisuus.
- Kuvaus: __________
- Kysely
ASTM A513 -standardi hiili- ja seoshitsatulle sähkövastukselle (ERW) Letkut mekaanisiin sovelluksiin. Se voidaan luokitella tyypiksi 1 (Kuumavalssattu sähkövastus hitsattu), Tyyppi 2 (Kylmävalssatut) ja tyyppi 5(Piirretty karan päälle) sen käsittelyprosessin mukaan. Piirretty kara (DOM) Letkulla on erinomainen samankeskisyys, sileä ulko- ja sisäseinämän paksuus kuin sen ERW-tuotteet, Käytetään usein autoteollisuudessa, Laite- ja rakennusteollisuus.
Tuotteen nimi: ASTM A513 Type5 mekaaninen laatu , DOM pyöreä teräsputki
Koko(mm): O. D.: 10.0-168.0 W. T.: 1.0-10.0mm L: Max 12000mm
DOM teräsputki, on hitsattu mekaaninen pyöreä teräsputki, josta on poistettu sisäinen hitsisauma ja joka luo sileän sisäpinnan. Pyöreä teräsputki DOM on vedetty karan päälle, jotta saadaan putki, jolla on tarkempi mittatarkkuus ja toleranssit, ja erittäin sileä insde ja ulkopinta. DOM-teräsletkut ovat ihanteellisia stressaaviin sovelluksiin, joissa vaaditaan korkeampaa laatua, lisääntyneet mekaaniset porperit, yhdenmukaisuus, voima, ja vakautta.
Eritelmät: ASTM A513 -tyyppi 5, 1020, 1045, 4130 mekaaninen laatu
Sovelluksia: kilpa-auton rungot, Rullahäkit, Moottoripyörän rungot,Spindles, Rullat, Akselit, moottorin kiinnikkeet, Holkit, Sylinterit, Teleskooppitoiminto, jne.
Työstettävyys: Helppo hitsata, leikata, Muoto ja kone.
Teräslaatu | C Max |
Mn | P Max |
S Max |
Si Max |
Cr Max |
Mo |
1008 | 0.10 | 0.30-0.50 | 0.035 | 0.035 | – | – | – |
1010 | 0.08-0.13 | 0.30-0.60 | 0.035 | 0.035 | – | – | – |
1018 | 0.14-0.20 | 0.60-0.90 | 0.035 | 0.035 | – | – | – |
1020 | 0.18-0.23 | 0.30-0.60 | 0.035 | 0.035 | – | – | – |
1026 | 0.22-0.28 | 0.60-0.90 | 0.035 | 0.035 | – | – | – |
1035 | 0.32-0.38 | 0.60-0.90 | 0.035 | 0.035 | – | – | – |
1045 | 0.37-0.44 | 0.60-0.90 | 0.035 | 0.035 | – | – | – |
4130 | 0.28-0.33 | 0.40-0.60 | 0.035 | 0.035 | 0.15-0.35 | 0.80-1.10 | 0.15-0.25 |
4140 | 0.38-0.43 | 0.75-1.00 | 0.035 | 0.035 | 0.15-0.35 | 0.80-1.10 | 0.15-0.25 |
Mekaaniset ominaisuudet:
Teräs Aste |
Saanto lujuus | Vetolujuus | Venymä | RB | RB | ||
KSI | Mpa | KSI | Mpa | % | Min | .max | |
Pesuallasvedetty letku | |||||||
1008 | 38 | 262 | 48 | 331 | 8 | 65 | |
1010 | 40 | 276 | 50 | 345 | 8 | 65 | |
1020 | 50 | 345 | 60 | 414 | 8 | 70 | |
1026 | 55 | 379 | 70 | 483 | 7 | 77 | |
1035 | 70 | 483 | 80 | 552 | 7 | 82 | |
4130 | 50 | 345 | 70 | 483 | 20 | 100 | |
4140 | 65 | 448 | 90 | 621 | 20 | 105 |
Teräs Aste |
Saanto lujuus | Vetolujuus | Venymä | RB | RB | ||
KSI | Mpa | KSI | Mpa | % | Min | .max | |
Normalisoiva letku | |||||||
1008 | 23 | 159 | 38 | 262 | 30 | 65 | |
1010 | 25 | 172 | 40 | 276 | 30 | 65 | |
1020 | 35 | 241 | 50 | 345 | 25 | 75 | |
1026 | 40 | 276 | 60 | 414 | 25 | 80 | |
1035 | 45 | 310 | 65 | 448 | 20 | 85 |
Teräs Aste |
Saanto lujuus | Vetolujuus | Venymä | RB | RB | |||
KSI | Mpa | KSI | Mpa | % | Min | .max | ||
Karan vetämä stressiä lievittävä letku | ||||||||
1008 | 45 | 310 | 55 | 379 | 12 | 68 | ||
1010 | 45 | 310 | 55 | 379 | 12 | 68 | ||
1020 | 55 | 379 | 65 | 448 | 10 | 75 | ||
1026 | 65 | 448 | 75 | 517 | 10 | 80 | ||
1035 | 75 | 517 | 85 | 586 | 10 | 85 | ||
4130 | 80 | 552 | 90 | 621 | 10 | 87 | ||
4140 | 95 | 655 | 105 | 724 | 10 | 90 |
ASTM A513 Type 5 Round Steel Tube – DOM Characteristics
ASTM A513 Type 5 Round Steel Tube – DOM is a Drawn Over Mandrel (DOM) tubing product which has closer OD/ID/Wall Tolerances than ERW products. Produced from 1020 ja 1026 teräs.
DOM pyöreä teräsputki, is a welded mechanical round steel tube with the internal weld seam removed creating a smooth internal surface.DOM is actually not a type of tubing, but a process that is applied to tubing after it is initially constructed. It is Drawn Over a Mandrel…which “cold works” it, giving it more exact dimensions relative to the inside and outside diameters, a smoother finish, and better alignment of the crystal lattice structure.
Although it is almost always referred to as a SEAMLESS tube, technically it is NOT seamless tubing, and it started life as some sort of EW (electric welded) tubing. During the manufacturing process, the weld line becomes nearly undetectable, thus it is referred to as SEAMLESS. It is considered a high strength, high quality tube, and is normally constructed from SAE 1020 tai 1026 steel ASTM A513,Type 5.
DOM round steel tube produce a tube having more exact dimensional accuracy and tolerances, and a very smooth inside and outside finish. DOM round steel tube is ideal for more stressful applications requiring higher quality, increased mechanical properties, yhdenmukaisuus, voima, and soundness DOM is commonly used in the manufacturing of race cars and motorcycle frames.
1020 is normally used in the manufacturing of small-diameter or thin-wall DOM steel tube. 1026 grade is normally used in the manufacturing of DOM over 2″ OD, with walls heavier than .156″.
- Eritelmät: ASTM A513 Type 5, 1020/1026 mekaaninen laatu
- Sovelluksia: kilpa-auton rungot, Rullahäkit, Moottoripyörän rungot, Spindles, Rullat, moottorin kiinnikkeet,Holkit, Teleskooppitoiminto, Hydraulic Cylinders, Axles, High Speed Shafts, Barrels, Bearings, Spacers, and many other machined tubular parts etc.
- Työstettävyys: Easy to Weld, Cut, Form and Machine
- Mekaaniset ominaisuudet: Brinell = 80, Tensile = 80,000 +/-, Yield = 70,000 +/-
Benefits of Drawn Over Mandrel (DOM) Round Mechanical Tubing:
- Uniform wall thickness with close OD and ID tolerances
- Uniform grain structure and controlled hardness
- High Tensile and Yield Strength
- Smooth and Clean OD and ID surfaces
- Excellent machining characteristics