Titanium bar, rod specifications
- Descripción
- Indagación
Estándar | ASTM B348/ASME SB348, ASTMF67, ASTM F136, ISO-5832-2(3), AMS4928, MIL-T-9047G, JIS etc |
Grado | ▲ Gr1, Gr2, Gr3, Gr4▲ Gr5 (Ti-6Al-4V)
▲ Gr7 (Ti-0.2Pd) ▲ Gr9 (Ti-3Al-2.5V) ▲ Gr12 (Ti-0.3Mo-0.8Ni) ▲ Gr23 (Ti-6Al-4V ELI) |
Titanium Round Bar Size | Diámetro: 2~300mm |
Titanium Square Bar Size | 5*5mm~100*100mm Thickness: 2~300mm |
Titanium Flat Bar Size | Width: 10~300mm Thickness: 2~300mm |
Titanium Hex Bar Size | 2~300mm |
Largura | 100~3000mm |
Technical | Forged, Machining |
Delivery state | Hot working state(R), Cold working state(Y), Annealing state(M) |
Surface | Acid surface, Polishing, Sand Blasting Finished, Brillante, Polished |
Forma | Redondo, Flat, Cuadrado, Hexagonal, Rectángulo |
Titanium Rod Form | Redondo, Cuadrado, Hex(A/F), Rectángulo, Billet |
Aplicación | Metallurgy, electronics, medical, químico, petroleum, pharmaceutical, aerospace, etc. |
What is a titanium bar, rod?
Titanium rod is a metal bars crafted from Titanium Ore. It has good performance of wear-resisting and anti-corrosion. It has low density and high strength, making it an essential structural material for industrial production.
Production Process of Titanium Bar, rod
What are the advantages of using a titanium bar, rod?
- Small density, high specific strength
The density of titanium metal is 4.51g/CM3, which is higher than aluminum and lower than steel, copper and nickel, but the specific strength is the first metal.
- High corrosion resistance
In the air or oxygen-containing media, the surface of titanium generates a dense, strong adhesion, inert oxide film, which protects the titanium substrate from corrosion.
- High resistance to damping
Titanium metal is subject to mechanical vibration, electrical vibration, compared with steel, copper metal, its own vibration decay time is long
- Tensile strength is close to its yield strength
Due to the yield limit of titanium and the modulus of elasticity ratio is large, so that the titanium molding rebound ability is large
- Healthy to Body
Not contain harmful metals has good compatibility with your body’s blood and tissues.
What are the quality application standards for titanium bar, rod?
ROD, BAR & FORGINGS | ||
Tamaños: Barra & RodFull Range of sizes in all grades |
GRADE | SPECIFICATIONS |
6AL-4V, 6AL-4V ELI | AMS-4928, 4930,4965, 4967, MIL-T-9047, AMS-T-9047, ASTM-F-367 |
|
6AL-2SN-4ZR-2MO | AMS04975, MIL-T-9047, AMS-T-9047 | |
6AL-6V-25SN | AMS-4978, MIL-T-9047, AMS-T-9047 | |
5AL-2.55N | AMS-4926, 4966, MIL-T-9047, AMS-T-9047, B50TF22 | |
8AL-1MO-IV | AMS-4972, 4973, MIL-T-9047, AMS-T-9047 | |
CP-GRADES 1,2,3,4,7 | AMS-4921, MIL-9047, ASTM-B-348, ASTM-F-67 |
Standard specifications for titanium bar
- Commercially Pure Titanium
- Aleación de titanio
Grade of titanium
- Ti Grade 1 is an unalloyed, low strength Ti product containing low oxygen with high formability; this Ti grade is used in airframes, heat exchangers, and desalination units.
- Ti Grade 2 is an unalloyed, medium-strength titanium product. This titanium grade is used in airframes, aircraft engines, and marine parts; good weldability and corrosion resistance are its distinguishing characteristics.
- Ti Grade 3 is an unalloyed, Alta resistencia, titanium product providing excellent corrosion resistance and good weldability. This titanium grade is primarily used in airframe and aircraft engine parts.
- Ti Grade 4 is the highest strength pure unalloyed titanium product. This titanium grade is used almost exclusively for airframe, aircraft engine parts, marine, surgical implants, hydraulic tubing. Good formability and corrosion resistance are its hallmark.
- Ti Grade 5 (6AL-4V) is an alloyed titanium product containing 6% Aluminum and 4% Vanadium; is a medium strength product. This titanium grade is predominantly used in airframe and turbine engine parts; and for use in surgical implants.
- Titanium 6AL – 4V ELI is an alloyed titanium product containing 6% Aluminum and 4% Vanadium, ELI (Extra Low Interstitial).
- 6AL–2Sn–4Zr–2Mo (6-2-4-2)is an alloyed titanium product containing 6% Aluminio, 2% Tin, 4% Circonio, 2% Molybdenum.
- 6AL–6V–2Sn (6-6-2)is an alloyed titanium product containing 6% Aluminio, 6% Vanadium, 2% Tin.
- 5AL–2.5Sn & ELI (5-2.5)is an alloyed titanium product containing 5% Aluminum and 2.5% Tin. Also ELI (Extra Low Interstitial).
- 8AL–1V–1Mo (8-1-1)is an alloyed titanium product containing 8% Aluminio, 1% Molybdenum and 1% Vanadium.
Different forms of titanium bar, rod
Application of titanium bar, rod
Titanium alloy bars, especially Ti-6AL-4V alloy bars, titanium connecting rods are used in automobile engines, which are not only wear-resistant but also light in weight, reducing the weight of automobiles
Subsequently, titanium was used in titanium spring seats, silencers, and exhaust gas tanks. Claro, titanium rods are used as stirring rods and fasteners in the chemical industry because of their corrosion resistance and wear resistance
Además, the superior performance of titanium has also attracted the attention of the medical profession, contributing to the development of medicine and human health.
- Electric power, Energy, and Seawater desalination
- Chemical Plants and electrolysis
- PHE, Aircraft and Jet Engines
- Automobiles, consumer appliances, sports, and medical care
- Civil Engineering and architectural materials
Common titanium and zirconium bar applications include:
- Fabrication to produce fasteners, flanges, and other heavy-duty machine components
- Dental implant studs and medical screws
- Consumer products including jewelry and tools
Shafts and impellers for mixing equipment
What are the available surface finish options for the titanium bar?
- Negro
- Bright Polished
- Rough Turned
- Matt Finish
Product quality control
- ▲ Chemical analysis – to define element contents such as C, N, O, H, Fe, Al, V.
- ▲ Mechanical properties – tension test including tensile, yield, elongation, reduction of area
- ▲ Dimensional tolerance – diameter and length tolerance check
- ▲ Surface contamination – imperfections removed
- ▲ Nondestructive test – 100% NDT for inspecting inner cracks, pores, and other defections
Physical Properties:
Grado | Status | Resistencia a la tracción | Límite elástico | Alargamiento | Area of Reduction | ||
Ksi | Mpa | Ksi | Mpa | % | |||
GR1 |
Recocido
|
35 | 20 | 25 | 170 | 24 | 30 |
GR2 | 50 | 345 | 40 | 275 | 20 | 30 | |
GR3 | 65 | 450 | 55 | 380 | 18 | 30 | |
GR4 | 80 | 550 | 70 | 483 | 15 | 25 | |
TI-6AL-4VELI | 125 | 860 | 115 | 795 | 10 | 25 | |
Ti6AL7Nb | 130.5 | 900 | 116.8 | 800 | 10 | 25 | |
Ti13Nb13Zr | ageing125Solid 800
Not annealed 800
|
860
550
550 |
105500
500 |
725345
345 |
815
8 |
1530
15 |
Chemical Requirements of Titanium Rod
N | C | H | Fe | O | Al | V | Pa | Mo | Ni | Ti | |
Gr. 1 | 0.03 | 0.08 | 0.015 | 0.2 | 0.18 | / | / | / | / | / | Remaining |
Gr. 2 | 0.03 | 0.08 | 0.015 | 0.3 | 0.25 | / | / | / | / | / | Remaining |
Gr. 3 | 0.05 | 0.08 | 0.015 | 0.3 | 0.35 | / | / | / | / | / | Remaining |
Gr. 4 | 0.05 | 0.08 | 0.015 | 0.5 | 0.4 | / | / | / | / | / | Remaining |
Gr. 5 | 0.05 | 0.08 | 0.015 | 0.4 | 0.2 | 5.5~6.75 | 3.5~4.5 | / | / | / | Remaining |
Gr. 7 | 0.03 | 0.08 | 0.015 | 0.3 | 0.25 | / | / | 0.12~0.25 | / | / | Remaining |
Gr. 9 | 0.03 | 0.08 | 0.015 | 0.25 | 0.15 | 2.5~3.5 | 2.0~3.0 | / | / | / | Remaining |
Gr.12 | 0.03 | 0.08 | 0.015 | 0.3 | 0.25 | / | / | / | 0.2~0.4 | 0.6~0.9 | Remaining |
Considerations when buying titanium bar, rod
- Finished products are smooth, have no peeling, no cracks, small tolerance
- superior performance, Alta resistencia, high-temperature resistance
- fine length, high hardness, no cracks
- stable material performance, quality assurance
- no oil, scratches, knocks on the surface
- side cutting surface is flat and smooth
Our Additional Services
Grand Titanium offers a complete range of services, starting from basic cutting and processing to more complex and bespoke solutions. This range includes:
- Plasma Cutting
- GAS Cutting
- Laser Cutting
- Waterjet Cutting
- Shear Cutting
- Bending, Machining & Fabrication
- Polishing
Why Choose Titanium bar, rod from us?
Grand Titanium is a global professional titanium bar, rod manufacturers, and supplier in China, all our products are manufactured in accordance with ASTM, AMS, and ISO international standards. and we make it easy for you to find the product you need with quick shipments!
- Quality Advantage
Located in Changzhou,Jiangsu, Grand has been supplying metallic products for 17 years. Material ration in line with international standards.
- Equipment Advantages
Complete supporting equipment, the introduction of the industry’s top roller drawing equipment, inspection and testing equipment to ensure production output and quality stability.
- Price Advantages
Source factory production, direct sales in reasonable price
Productos Relacionados
-
Leer másVista rápida
Stainless Steel Foil
Stainless steel foils are thin strips of stainless steel that are less than 0.2 mm in thickness and less than 300 mm in width.
Stainless steel foils offer a variety of advantages, including chemical stability, high strength-to-weight ratio, electrical insulation and corrosion resistance.
Stainless steel foil is used in the production of heat exchangers, capacitors and fuel cells; as well as in medical equipment and food processing machinery.
Stainless steel foils are a versatile material with many advantages. Its high corrosion resistance, good thermal and electrical conductivities and its ductility makes it an excellent choice for a wide range of applications.
Stainless steel foil is available in several different grades. These include austenitic series, ferritic series, martensitic series, duplex and super duplex series. Each grade has different alloying elements that contribute to the properties of the foil.
The most common grades of stainless steel foils are 304 y 316. These grades are supplied in thicknesses ranging from 0.009mm to 0.3mm. Other grades of stainless steel foil are also available upon request including 409, 430 and duplex 2205.
-
Leer másVista rápida
Aluminium Coil
Aluminium coil is a rolled product, produced in a coiled form of a continuous strip, and has an inner diameter and outer diameter. ID from50mm to 1000mm. Aluminium alloy grade including 1xxx, 2xxx, 3xxx, 4xxx, 5xxx, 6xxx, 7xxx, 8xxx. But the most common is 1050, 3003, 6061 y 5251 aluminum coil. Thickness from 0.045-80mm, width from 60-2650mm. Common widths of aluminum coil is 800mm,1000milímetro, 1250milímetro,1450mm and 1500mm.
Multiple industries rely on aluminium coils for a variety of applications, such as automotive, construction, heat transfer, pharmaceutical, electrical, and food industry. Compared to other materials, aluminum is a far superior material in many instances. Aluminum coil can be supplied with standard mill finish, or it can be brushed, checkered, color coated, satin-finished and anodized. Aluminium sheet or aluminium foil can be cut into coils as per client’s requirements.
-
Leer másVista rápida
Titanium Foil
Titanium foil is a titanium plate, strip, roll or sheet with a thickness of less than or equal to 0.2mm. The maximum width of rolled titanium foil is about 600mm.
The width of the titanium foil is cut according to the requirements of the user.But the wider the manufacturing, the higher the productivity.
Titanium foil is mainly used in aerospace, navigation, nuclear power, electronics, industria química, petroleum, precision manufacturing, medical pharmaceutical and other aspects. -
Leer másVista rápida
Brass Coil
Brass coil has excellent plasticity (best in brass) and high strength, good machinability, easy to weld, very stable to general corrosion, but prone to corrosion cracking; brass coil is copper and the alloy of zinc is named for its yellow color.
The mechanical properties and wear resistance of the brass coil are very good, and can be used to manufacture precision instruments, ship parts, shells of guns, etc. Brass knocks up and sounds good, so instruments such as cymbals, cymbals, bells, and numbers are made of brass. According to the chemical composition, brass is divided into ordinary copper and special brass.
-
Leer másVista rápida
Copper Foil
Copper is a reddish brown metallic element with outstanding characteristics such as good ductility, ductility, heat and conductivity
Pure copper is a very soft and ductile metal To achieve the required performance, we can alloy with other metals Brass and bronze are widely used copper alloys
Copper foil is made of copper or copper alloy by hot rolling and cold rolling The thickness of copper foil ranges from 0.03mm to 0.2mm, and the width and length can be customized according to customer requirements
-
Leer másVista rápida
Stainless Steel Strips
Stainless Steel Strip is an austenitic chromium-nickel-manganese stainless steel that offers electromagnetic properties like electrical resistivity, magnetic permeability & electrical conductivity and Young’s Modulus of Elasticity. We offer these stainless steel strips in various material grades such as Stainless Steel 304 Strips, Acero inoxidable 310 Strips, Acero inoxidable 316 Strips, Acero inoxidable 904 Strips and many more.
Hot Rolled Stainless Steel Strips are produced from hot rolling billets or slabs and then use a cold rolling process. These processes improve strips mechanical properties such as stiffness coefficient and flexibility. Cold Rolled Stainless Steel Strips are obtained from annealed and pickled by cold rolling on polished rolls. As per the required thickness, cold rolling requires a number of passes through mill to effect reduction.
We supply SS Strips in various industries including food industries, químico, electrical, generator, shaft, cement & gas industries. The offered these Stainless Steel Strips in standards as well as customized dimensions as per the client’s requirement.
-
Leer másVista rápida
Stainless Steel Sheets
Stainless Steel Sheets & Plates are made up of austenitic steel mainly contain chromium and nickel with the addition of rare elements which offer high corrosion resistance, high tensile strength, excellent impact & toughness and high-temperature resistance at cryogenic temperatures. Moreover, these SS Sheets & Plates are highly demanded in various industries like chemical & Procesamiento de alimentos, heat exchangers, fresh & saltwater marine environments, automobiles and more.
-
Leer másVista rápida
Titanium Sheet
Titanium plate has high corrosion resistance and specific strength, and is widely used in electric power, industria química, aviation parts, building materials, sports equipment, medical and other fields and is still expanding. From the point of view of use and manufacturing technology, titanium plate has low price, high performance, multiple functions, and easy production.
Si tiene alguna pregunta,Por favor, no dude en ponerse en contacto sales@grandsteeltube.com
-
Leer másVista rápida
Copper Rod
Copper bar is a kind of non-ferrous metal processing bar, which has better processing performance and high conductivity. It is mainly divided into brass rod (copper zinc alloy, cheaper), purple copper rod (higher copper content).
Brass rod is a rod shaped object made of copper and zinc alloy, named for its yellow color. The melting point of brass, which contains 56% Para 68% copper, es 934 Para 967 Grados. Brass has good mechanical properties and wear resistance, and can be used to manufacture precision instruments, ship parts, gun casings and so on. Used in air conditioning pipe, refrigerator pipe, oil pipe, water supply pipe and all kinds of mechanical materials, automotive synchronizer gear ring, Marine pump, valve, structural parts, friction accessories, etc.
Purple copper rod is named for its purple red color. It has good electric conductivity, heat conduction, corrosion resistance and processing properties. It can be welded and brazed. Characteristics: high purity, fine structure, low oxygen content. No porosity, trachoma, loose, excellent electrical conductivity, high precision of electroetching mold surface, after heat treatment process, no direction of the electrode, suitable for fine play, fine play, with good thermoelectric channel, processability, ductility, corrosion resistance and weather resistance.
-
Leer másVista rápida
Aluminium foil
Aluminium foil is aluminium prepared in thin metal leaves with a thickness of less than 0.2mm (7.9 mils); thinner gauges down to 4 micrometers are also commonly used. Standard household foil is typically 0.016 milímetro (0.63 mils) thick, and heavy-duty household foil is typically 0.024 milímetro (0.94 mils). And the air conditioner foil can be thinner than 0.0047mm, and some food foil thinner than 0.002mm. The foil is pliable and can be readily bent or wrapped around objects. Thin foils are fragile and are sometimes laminated with other materials such as plastics or paper to make them stronger and more useful. It’s used industrially for a variety of purposes, including packing, insulation and transportation. At home, people use aluminum foil for food storage, to cover baking surfaces and to wrap foods, such as meats, to prevent them from losing moisture while cooking.
- DIN2391 Tubo de acero de precisión
- EN10305-1/4 Tubo de acero de precisión
- EN10305-2/3/5/6 Tubos de precisión
- Tubos de precisión de la serie SAE
- ISO8535-1 Tubo de inyección de combustible
- Tubo Bundy de pared Single/Doulbe
- Caldera & Tubos de acero a presión
- Tubo de acero sin costura/SRB
- Tubos de acero inoxidable capilar
- Tubos inoxidables sin costura & Tubería
- Tubos inoxidables soldados & Tubería
- Inyección & Tubos de línea de control
- Tubos de aleación de níquel & Tubería
- Tubos capilares no ferrosos
- Tubos de aluminio & Tubería
- Tubos de latón & Tubería
- Tubos de cobre & Tubería
- Tubos de titanio & Tubería
- Tubo de aleta extruida/soldada
- Tubo de precisión no ferroso
- Tubos de acero de forma especial
- Bobina metálica / lámina / hoja / tira