Stainless Steel U Bend Tube
U-shaped or U-bent tubes give the end user more freedom to design a more compact system than straight tubes do. La stainless steel U bend tube is perfect for applications involving heat and elevated pressure levels since it is frequently used in heat exchanger applications. An expansion joint would be used to join a straight tube in settings with exceptionally high temperatures. It would be terrible for the application if straight tubes’ thermal expansion was not taken into account.
Not to add, the price of the application is increased by the cost of using an expansion joint. Tamen, when connecting a tube and a shell, a Stainless Steel U Bend Tube For Heat Exchanger allows for thermal expansion of the component without adding on or increasing the cost. Tial, employing stainless steel U-shaped tubes is not only effective but also economical. Although the component’s design is critical for its intended use, choosing the right grade when producing the stainless steel U-shaped tube is also a crucial factor. Stainless steel comes in a variety of grades on the market today.
Any grade of stainless steel tube U bend has an almost endless range of applications, from the highly affordable grade alloy 304 to the marine grade alloy 316. La Ss 316ti U Bend Tubes, which contain titanium added to its chemical composition, is one of the most attractive alloys since the durability of the application also comes into view. In particular, the alloy creates titanium carbide rather than carbide precipitates, which is not lethal to welded components, which improves the high temperature performance of the stainless steel welded U tube.
- Priskribo
- Enketo
U-shaped or U-bent tubes give the end user more freedom to design a more compact system than straight tubes do. La stainless steel U bend tube is perfect for applications involving heat and elevated pressure levels since it is frequently used in heat exchanger applications. An expansion joint would be used to join a straight tube in settings with exceptionally high temperatures. It would be terrible for the application if straight tubes’ thermal expansion was not taken into account.
Not to add, the price of the application is increased by the cost of using an expansion joint. Tamen, when connecting a tube and a shell, a Stainless Steel U Bend Tube For Heat Exchanger allows for thermal expansion of the component without adding on or increasing the cost. Tial, employing stainless steel U-shaped tubes is not only effective but also economical. Although the component’s design is critical for its intended use, choosing the right grade when producing the stainless steel U-shaped tube is also a crucial factor. Stainless steel comes in a variety of grades on the market today.
Any grade of stainless steel tube U bend has an almost endless range of applications, from the highly affordable grade alloy 304 to the marine grade alloy 316. La Ss 316ti U Bend Tubes, which contain titanium added to its chemical composition, is one of the most attractive alloys since the durability of the application also comes into view. In particular, the alloy creates titanium carbide rather than carbide precipitates, which is not lethal to welded components, which improves the high temperature performance of the stainless steel welded U tube.
Production process:
straight pipe – bending before 100% flaw detection – reliable bending machine and precision bending mould – bending after the U-shaped part of the electric heating stress relief annealing – bending after 100% water pressure
STAINLESS STEEL U TUBE TOLERANCES:
Dimensional tolerances U tubes acc. to TEMA R.C.B.
1) Length of straight part -0/+5 mm
Flattening (also called “ovality”) at the bend shall not exceed 10% of the nominal tube outside diameter.
Wall thickness in bending part acc. to TEMA R.C.B 2.31
2) Minimum tube wall thickness in the bend part (T min)T(min) ≥ (SW × (2×R + D))/( 2× (R+D)
where: SW is smallest wall thickness
D Nominal outside diameter
R radius
3)Radius tolerance
1. for R 100 mm +/- 3 mm
2. for R ≥ 100 mm +/- 5 mm
3. Straightness tolerance max. 1,5 mm per 1 m
U-Tube ends: plain, verticallycut to the tube axis
Pakado:
Packed in ply wooden box wrapped in plastic, and suitably protected for sea-worthily delivery or as requested.
Stainless steel U bent Tube standard and material grade:
ASTM A213 TP304/304L TP316/316L TP310S Stainless steel U Tube bundles forBoiler, Kondensiloj, Super Heaters,Varmo-interŝanĝiloj, Malvarmigiloj/Inter-malvarmigiloj, Chiller
ASTM/ASME A/SA268 TP405, TP409, TP410, TP430,TP439, TP444 Ferritic and Martensitic Stainless Steel Seamless U Tube Tube bundles
ASTM/ASME A/SA213 TP304/304L,TP304H, TP316/316L, TP347/347H,TP316Ti, TP321/321H, TP310S Seamless Austenitic Stainless Steel U Tubes Tube bundles
ASTM A249 TP304/304L,TP304H, TP316/316L, TP347/347H,TP316Ti, TP321/321H, TP310S Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser U Tubes bundles forBoiler, Kondensiloj, Super Heaters,Varmo-interŝanĝiloj, Malvarmigiloj/Inter-malvarmigiloj, Chiller.
ASTM A269 TP304/304L TP316/316L Stainless Steel U Bend Heat Exchanger Tube, Boiler Tubing Tube bundles
Monel400 U tube Tube bundles UNS N06600,625, Incoloy800/800H 825 U bend tube Tube bundles, hastelloy U bent tube Tube bundles
Duplex UNS S31803/32205 UNS S32750 U bent tube, super duplex U tube for Heat Exchanger Tube Boiler Condensers Super Heaters Coolers/Inter-coolers Chiller.
| Tajpu | Grado | Grado | Chemical Component % | ||||||||||
| C | Cr | En | Mn | P | S | Mo | Kaj | Cu | N | Alia | |||
| Austenitic | 201 | SUS201 | ≤0.15 | 16.00-18.00 | 3.50-5.50 | 5.50－7.50 | ≤0.060 | ≤0.030 | – | ≤1.00 | – | ≤0.25 | – |
| 304 | 1.4301 | ≤0.07 | 17.00-19.00 | 8.00-10.00 | ≤2.00 | ≤0.045 | ≤0.030 | – | ≤1.00 | – | – | – | |
| 304L | 1.4307 | ≤0.030 | 18.00-20.00 | 8.00-10.00 | ≤2.00 | ≤0.045 | ≤0.030 | – | ≤1.00 | – | – | – | |
| 304H | 1.4948 | 0.04-0.10 | 18.00-20.00 | 8.00-10.00 | ≤2.00 | ≤0.045 | ≤0.030 | – | ≤1.00 | – | – | – | |
| 309 | 1.4828 | ≤0.20 | 22.00-24.00 | 12.00-15.00 | ≤2.00 | ≤0.045 | ≤0.030 | – | ≤1.00 | – | – | – | |
| 309S | * | ≤0.08 | 22.00-24.00 | 12.00-15.00 | ≤2.00 | ≤0.045 | ≤0.030 | – | ≤1.00 | – | – | – | |
| 310 | 1.4842 | ≤0.25 | 24.00-26.00 | 19.00-22.00 | ≤2.00 | ≤0.045 | ≤0.030 | – | ≤1.50 | – | – | – | |
| 310S | * | ≤0.08 | 24.00-26.00 | 19.00-22.00 | ≤2.00 | ≤0.045 | ≤0.030 | – | ≤1.50 | – | – | – | |
| 314 | 1.4841 | ≤0.25 | 23.00-26.00 | 19.00-22.00 | ≤2.00 | ≤0.045 | ≤0.030 | – | 1.50-3.00 | – | – | – | |
| 316 | 1.4401 | ≤0.08 | 16.00-18.50 | 10.00-14.00 | ≤2.00 | ≤0.045 | ≤0.030 | 2.00-3.00 | ≤1.00 | – | – | – | |
| 316L | 1.4404 | ≤0.030 | 16.00-18.00 | 10.00-14.00 | ≤2.00 | ≤0.045 | ≤0.030 | 2.00-3.00 | ≤1.00 | – | – | – | |
| 316De | 1.4571 | ≤0.08 | 16.00-18.00 | 10.00-14.00 | ≤2.00 | ≤0.045 | ≤0.030 | 2.00-3.00 | ≤1.00 | – | 0.1 | Ti5(C+N)~0.70 | |
| 317 | * | ≤0.08 | 18.00-20.00 | 11.00-15.00 | ≤2.00 | ≤0.045 | ≤0.030 | 3.00-4.00 | ≤1.00 | – | 0.1 | – | |
| 317L | 1.4438 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | ≤2.00 | ≤0.045 | ≤0.030 | 3.00-4.00 | ≤1.00 | – | 0.1 | – | |
| 321 | 1.4541 | ≤0.08 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0.045 | ≤0.030 | – | ≤1.00 | – | – | Ti5(C+N)~0.70 | |
| 321H | * | 0.04-0.10 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0.045 | ≤0.030 | – | ≤1.00 | – | – | Ti5(C+N)~0.70 | |
| 347 | 1.4550 | ≤0.08 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0.045 | ≤0.030 | – | ≤1.00 | – | – | Nb≥10*C%-1.10 | |
| 347H | 1.494 | 0.04-0.10 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0.045 | ≤0.030 | – | ≤1.00 | – | – | Nb≥10*C%-1.10 | |
| xm-19 | Nitronic50 | ≤0.06 | 20.50-23.50 | 11.50-13.50 | 4.0-6.0 | ≤0.045 | ≤0.030 | 1.50-3.00 | ≤1.00 | – | 0.2-0.4 | Nb:0.10-0.30 V:0.10-0.30 | |
| 904L | N08904 | ≤0.02 | 19.0-23.0 | 23.0-28.0 | 4.0-5.0 | ≤0.045 | ≤0.035 | ≤1.00 | 0.1 | Cu:1.0-2.0 | |||
| Duplex | 2205 | S32205 | ≤0.03 | 22.0-23.0 | 4.5-6.5 | ≤2.00 | ≤0.030 | ≤0.020 | 3.0-3.5 | ≤1.00 | – | 0.14-0.20 | |
| 2507 | S32750 | ≤0.03 | 24.0-26.0 | 6.0-8.0 | ≤1.20 | ≤0.035 | ≤0.020 | 3.0-5.0 | ≤0.80 | 0.5 | 0.24-0.32 | ||
| * | S32760 | ≤0.03 | 24.0-26.0 | 6.0-8.0 | ≤1.00 | ≤0.030 | ≤0.010 | 3.0-4.0 | ≤1.00 | 0.5-1.00 | 0.2-0.3 | ||
| 2304 | S32304 | ≤0.03 | 21.5-24.5 | 3.0-5.5 | ≤2.50 | ≤0.040 | ≤0.030 | 0.05-0.6 | ≤1.00 | 0.05-0.6 | 0.05-0.2 | ||
| 329 | 1.4460 | ≤0.08 | 23.00-28.00 | 2.00-5.00 | ≤1.00 | ≤0.040 | ≤0.030 | 1.00-2.00 | ≤0.75 | – | – | ||
| Ferrite | 409 | S40900 | ≤0.03 | 10.50-11.70 | 0.5 | ≤1.00 | ≤0.040 | ≤0.020 | – | ≤1.00 | – | ≤0.030 | Ti6(C+N)~0.50 Nb:0.17 |
| 430 | 1Cr17 | ≤0.12 | 16.00-18.00 | – | ≤1.0 | ≤0.040 | ≤0.030 | – | ≤1.0 | – | – | – | |
| 446 | S44600 | ≤0.20 | 23.00-27.00 | 0.75 | ≤1.5 | ≤0.040 | ≤0.030 | 1.50-2.50 | ≤1.00 | – | ≤0.25 | – | |
| Martensite | 410 | 1Cr13 | 0.08-0.15 | 11.50-13.50 | 0.75 | ≤1.00 | ≤0.040 | ≤0.030 | – | ≤1.00 | – | – | – |
| 420 | 2Cr13 | ≥0.15 | 12.00-14.00 | – | ≤1.00 | ≤0.040 | ≤0.030 | – | ≤1.00 | – | – | – | |
| 440C | 11Cr17 | 0.95-1.20 | 16.00-18.00 | – | ≤1.00 | ≤0.040 | ≤0.030 | 0.75 | ≤1.00 | – | – | – | |
Specifo :
| Outside Diameter | 6.35 mm O.D to 76.2 mm O.D |
| Dikeco | 0.7 mm to 10 mm |
| Longo | As per Customer requirement, Maximum upto 30Meter Long. |
| Normoj | ASTM A213, ASME SA213,ASTM A249,ASTM/ASME A/SA789,ASTM/ASME A/SA 163,ASTM/ASME A/SA268,ASTM/ASME A/SA688/213,ASTM/ASME A/SA803,ASTM/ASME A/SA556 |
| Tajpu | Seamless Tubes, Welded Tubes |
| Grades | TP 304 Tubo, TP 304L Tube, TP 316 Tubo, TP 316L Tube, TP 321 Tubo, TP 321H Tube, TP 347 Tubo, TP 347H Tube, TP 202 Tubo, JT 7 Tubo, J4 1 Tubo, TP 409 Tubo, TP 409L Tube, TP 410 Tubo, TP 430Ti Tube, TP 439 Tubo |
Rilataj Produktoj
-
Legu pliRapida VidoSeamless Fin Tube
A fin tube is a tube that has small fins around the outside surface.
These fins act as a filter and a mechanism to transfer heat from the material inside the tube to the outside space or vice versa. Fin tubes are used in applications that require a transfer of heat from a hot fluid to a colder fluid through the tube’s wall.
Grand provide a wide range of fin tubes(carbon, stainless,kupro,aluminium,titanio,ktp;) are used in heat exchangers (air, water and chemically cooled)for various industries such as petroleum, petrochemical, ŝtalo, power generation and many more.
-
Legu pliRapida VidoLongitudinal Finned Tubes
Longitudinal finned tubes are produced by welding the fins with resistance along the length of the tube. The fins first form a u-shaped channel, allowing each of the u-shaped legs to form a fin. The channel is cut to the appropriate length and then welded into place along the length of the tube and resistance. The channels are a pair of welded, polar opposites, so the number of fins specified must be a multiple of four.
For a given tube or tube size, the desired heat transfer surface area per tube unit length can be obtained by specifying the appropriate fin height and number of fins. The maximum number of fins depends on the outer diameter of the tube – the larger OD tube can accommodate more fins.
-
Legu pliRapida VidoStainless Fin Tube
Stainless steel fin tubes are processed out of various grades of both seamless and welded plain tubes. Plain stainless steel tubes will be procured from well known indian plain tube manufacturers, as per material specification and customer requirement, for processing fin tubes. Plain stainless steel tubes will be procured for finning, duly hydro tested and eddy current tested as per material specification and code, from plain tube manufacturers only, as per customer requirement. If customer require, we will procure plain stainless steel tubes, duly inspected, approved and released by customer or third party inspection agency, at plain tubes manufacturer’s end.
-
Legu pliRapida VidoLow Alloy U Bend Tube
U bending tube is carried out by cold working method and is being done to the necessary bend radius as per client drawings. U-fleksa tubo/pipo povas esti produktitaj el ampleksa gamo da tubmaterialoj kiuj enhavas altajn kaj malaltajn rendimentajn neoksideblajn ŝtalojn., alojaj ŝtaloj, karbonaj ŝtaloj,Monel , Inconel, hastelloy,dupleksa , superdupleksa,titanio,kupra alojo kaj Cr-Ni alojoj. Kutime U-kurboj fabrikitaj el senjunta tubo, povas plu personecigi laŭ dikecoj kaj grandecoj laŭ la specifaj postuloj de niaj klientoj. Ili estas facilaj por plue kunmeti tubajn pakaĵojn.
Grand provizas U-bend Tubes-tubon en diversaj industrioj por gamo da aplikoj kiel ekzemple en Kaldrono, Kondensiloj, Super Heaters,tubfaskoj por Varmo-interŝanĝiloj, Malvarmigiloj/Inter-malvarmigiloj, Chiller, kaj tiel plu. Ĉi tiuj ankaŭ estas uzataj en malsamaj industrioj kiel en Sterko-Plantoj, Sukerindustrio, Ŝtalfabrikoj,Oleo & Gasfabrikoj, Kemiaĵo & Petrokemiaj plantoj, Rafinejoj, Elektrocentraloj, Renoviĝantenergiaj plantoj ktp.
-
Legu pliRapida VidoAluminia Naĝila Tubo
La aluminia naĝila materialo tute enfermas la tubon, krom ĉe la finoj kie tubo-tegaĵo povas esti aplikita. Kie atmosfera korodo ĉeestas kaj kiam funkciigite ene de dezajnotemperaturlimoj, elstruditaj naĝilaj tuboj disponigas la plej stabilan agadon laŭlonge de la tempo kompare kun la aliaj naĝiltipoj. La naĝilo estas rulita de ekstera aluminiotubo per procezo uzanta premon por krei rulitan "premligon" inter la ekskursoflua tubo kaj naĝiloj..
-
Legu pliRapida VidoExtruded Copper Fin Tube
Copper is a metal element, and pure copper is a soft metal. The surface is reddish orange with metallic luster when it is just cut open, and its simple substance is purple-red. Good ductility, high thermal conductivity and electrical conductivity, so it is the most commonly used material in cables and electrical and electronic components.
It can also be used as a building material and can be composed of many alloys. Copper alloys have excellent mechanical properties and low electrical resistivity. The most important ones are bronze and brass. Krome, copper is also a durable metal that can be recycled multiple times without compromising its mechanical properties.
-
Legu pliRapida VidoKupra Alojo U Bend Tubo
Kupro kaj Cu-alojo U-fleksa tubo estas farita per malvarma labormetodo kaj estas farita al la necesa kurbradiuso laŭ klientdesegnaĵoj.. U-fleksa tubo/pipo povas esti produktitaj el ampleksa gamo da tubmaterialoj kiuj enhavas altajn kaj malaltajn rendimentajn neoksideblajn ŝtalojn., alojaj ŝtaloj, karbonaj ŝtaloj,Monel , Inconel, hastelloy,dupleksa , superdupleksa,titanio,kupra alojo kaj Cr-Ni alojoj. Kutime U-kurboj fabrikitaj el senjunta tubo, povas plu personecigi laŭ dikecoj kaj grandecoj laŭ la specifaj postuloj de niaj klientoj. Ili estas facilaj por plue kunmeti tubajn pakaĵojn.
Grand provizas U-bend Tubes-tubon en diversaj industrioj por gamo da aplikoj kiel ekzemple en Kaldrono, Kondensiloj, Vaporigiloj,tubfaskoj por Varmo-interŝanĝiloj, Malvarmigiloj/Inter-malvarmigiloj, Chiller, kaj tiel plu. Ĉi tiuj ankaŭ estas uzataj en malsamaj industrioj kiel en Sterko-Plantoj, Sukerindustrio, Ŝtalfabrikoj,Oleo & Gasfabrikoj, Kemiaĵo & Petrokemiaj plantoj, Rafinejoj, Elektrocentraloj, Renoviĝantenergiaj plantoj ktp.
-
Legu pliRapida VidoTubo de Titanio U Bend
Titania U-Klib-tubo estas farita per malvarma labormetodo kaj estas farita al la necesa kurbradiuso laŭ klientdesegnaĵoj.. U-fleksa tubo/pipo povas esti produktitaj el ampleksa gamo da tubmaterialoj kiuj enhavas altajn kaj malaltajn rendimentajn neoksideblajn ŝtalojn., alojaj ŝtaloj, karbonaj ŝtaloj,Monel , Inconel, hastelloy,dupleksa , superdupleksa,titanio,kupra alojo kaj Cr-Ni alojoj. Kutime U-kurboj fabrikitaj el senjunta tubo, povas plu personecigi laŭ dikecoj kaj grandecoj laŭ la specifaj postuloj de niaj klientoj. Ili estas facilaj por plue kunmeti tubajn pakaĵojn.
-
Legu pliRapida VidoHigh Frequency Welded(HFW) Fin Tube
High frequency welded finned tube is a type of finned tube, which is mainly welded by high frequency welding and is a new type of excellent heat dissipation element. The high frequency welding finned tube is welded with high frequency current, the welding method is reliable and excellent, the welding seam is small, and the surface of the radiator is more solid as well as beautiful.
High frequency welded finned tube is a heat sink element often used in finned tube radiators. Welding high-frequency welded finned tube on the base tube of the radiator improves the heat transfer coefficient of the heat exchanger side of the radiator and enhances the heat dissipation effect of the radiator, and the excellent heat dissipation effect makes the finned tube more and more popular.
The high frequency welding finned tube is welded with high frequency current, which can increase the compactness of the radiator and improve the safety of the high frequency welding finned tube radiator in the operation process. The high-frequency welding process is an improved and upgraded process on the basic welding process, which is also a more excellent welding process.
-
Legu pliRapida VidoStud Fin Tube
The STUDDED Fin Tube is manufactured by Resistance Welding of Studs on the Bare tubes.
The fins are manufactured by welding of the Fin Material which is essential a stud or rod welded at base to the tube by Electrical Resistance Process.
The current is made to flow through the Tube and the base of the studs. The studs are specifically made in shapes to facilitate the welding process. The Stud; during the finning “welding” process is also mechanically pressed on the tube at the point of welding thence causing a very good mechanical bond. This type of Fin Tube find very good application in high pressure and high temperature applications. The mechanical bond is very strong and hence finds application in places where extreme mechanical load, stress is expected while during the process or cleaning etc.
These Fin Tubes find application in Finned Pipes, Air Coolers, Heat Exchangers etc and are preferred in Industries like Petrochemical Refineries, Power Plants, Chemical Industries, Ŝtalfabrikoj, ktp.