Pulvora Tegita Aluminia Tubo
Aluminiaj Rondaj Tuboj haveblas en alojoj 6061, 6063,6082, Aluminio 6061 estas la plej uzata alojo, proponante pli bonan korodan reziston kaj veldeblecon ol aliaj Aluminia Tubo, sed malpli forto. Alojo 6063 ofertas altan korodan reziston kaj estas ofte uzata por subĉielaj strukturaj aplikoj kiel ekzemple Aluminia Tuba balustrado kaj tajlado..
Se ajnaj demandoj,Bonvolu kontakti sales@grandsteeltube.com
- Priskribo
- Kemia Komponado:
- Specifoj
- Enketo
Aluminum tube.
It is a kind of high-strength hard aluminum, which can be heat-treated and strengthened. It has medium plasticity in annealing, quenching and hot state. It has good spot weldability. The aluminum tube has the tendency to form intergranular cracks when using gas welding and argon arc welding. After quenching and cold work hardening, the machinability is good and it is not good in the annealed state. The corrosion resistance is not high, and the anodizing treatment and painting method or the surface is coated with an aluminum layer to improve the corrosion resistance. It can also be used as a mold material.
Aluminum tube advantages:
1 – the advantages of welding technology: thin-walled copper-aluminum tube welding technology suitable for industrial production, known as the world-class problem, is the key technology for the aluminum-based copper of the air-conditioner connecting tube.
2 – the service life advantage: from the inner wall of the aluminum tube, since the refrigerant does not contain moisture, the inner wall of the copper-aluminum connecting tube does not corrode.
3 – the energy-saving advantage: the connecting line between the indoor unit and the outdoor unit of the air conditioner, the lower the heat transfer efficiency, the more energy-saving, or the better the heat insulation effect, the more power-saving.
4 – excellent bending performance, easy to install, transfer machine
Surface finish editing.
1 – Chemical treatment: oxidation, electrophoretic coating, fluorocarbon coating, powder coating, wood grain transfer
2 – Mechanical treatment: mechanical drawing, mechanical polishing, sand blasting
Se ajnaj demandoj,vi estas pli ol bonvena kontakti sales@grandsteeltube.com
Kemia Komponado:
Alojo | Kaj | Fe | Cu | Mn | Mg | Cr | Zn | De | Zr | Impurity | Al |
2014 | 0.5-1.2 | 0.7 | 3.9-5.0 | 0.4-1.2 | 0.2-0.8 | 0.1 | 0.25 | 0.15 | - | 0.15 | Rest |
2017 | 0.2-0.8 | 0.7 | 3.5-4.5 | 0.4-1.0 | 0.4-0.8 | 0.1 | 0.25 | 0.15 | - | 0.15 | Rest |
2024 | 0.5 | 0.5 | 3.8-4.9 | 0.3-0.9 | 1.2-1.8 | 0.1 | 0.25 | 0.15 | - | 0.15 | Rest |
5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | 0.1 | - | - | 0.15 | Rest |
5056 | 0.3 | 0.4 | 0.1 |
0.05-0.20 |
4.5-5.6 | 0.05-0.20 | 0.1 | - | - | 0.15 | Rest |
5083 | 0.4 | 0.4 | 0.1 | 0.40-1.0 | 4.0-4.9 | 0.05-0.25 | 0.25 | 0.15 | - | 0.15 | Rest |
5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | 0.2 | 0.15 | - | 0.15 | Rest |
6061 | 0.4-0.8 | 0.70 | 0.15-0.40 | 0.15 | 0.8-1.2 | 0.04-0.35 | 0.25 | 0.15 | - | 0.15 | Rest |
6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45-0.9 | 0.1 | 0.1 | 0.1 | - | 0.15 | Rest |
6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | 0.2 | 0.1 | - | 0.15 | Rest |
7050 | 0.12 | 0.15 | 2.0-2.6 | 0.1 | 1.9-2.6 | 0.04 | 5.7-6.7 | 0.06 | 0.08-0.15 | 0.15 | Rest |
7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | 5.1-6.1 | 0.2 | - | 0.15 | Rest |
Se ajnaj demandoj,bonvolu bonvolu kontakti sales@grandsteeltube.com
tem | Aluminium pipe/pipes Aluminium Tube/Tubes/tubing |
Materialo | Aluminium |
Grado |
1000 serio: 1050,1060,1070,1080,1100,1435, etc2000 series: 2011,2014,2017,2024, ktp
3000 serio: 3002,3003,3104,3204,3030, ktp 5000 serio: 5005,5025,5040,5056,5083, ktp 6000 serio: 6101,6003,6061,6063,6020,6201,6262,6082, ktp 7000 serio: 7003,7005,7050,7075, ktp |
standards | ASTM, ASME,EN, LI, DE,GB/T etc |
Grandeco | Outer Diameter:1-250mm |
Mura dikeco: 0.15-50mm | |
Longo: 10mm -6000mm | |
Surface treatment |
Mill finishAnodized
Elektroforezo Pulvora tegaĵo Ligna greno Sand blast |
Surface colors | Nature, silver, bronze, ĉampano, nigra, gloden, etcAs customized |
Temperaro | T3-T8 |
Moulding/Pattern
|
|
Apliko
|
1. Lighting,solar reflector plate.2.architectural appearance, interior decoration:ceiling,metope,
furniture,cabinets and so on. 3.elevator,nameplate, bags. 4.automotive interior and exterior decoration. 5. Interior decoration: such as photo frame. 6.household appliances, refrigerator, microwave oven, audio equipment. 7. Aerospace and military aspects. 8, machinery parts processing, mold manufacturing . 9. chemical/insulation pipeline coating. |
Se ajnaj demandoj,vi estas pli ol bonvena kontakti sales@grandsteeltube.com