Stainless Steel Strip is an austenitic chromium-nickel-manganese stainless steel that offers electromagnetic properties like electrical resistivity, magnetic permeability & electrical conductivity and Young’s Modulus of Elasticity. We offer these stainless steel strips in various material grades such as Stainless Steel 304 Strips, Stainless Steel 310 Strips, Stainless Steel 316 Strips, Stainless Steel 904 Strips and many more.
Titanium Foil
Titanium foil is a titanium plate, strip, roll or sheet with a thickness of less than or equal to 0.2mm. The maximum width of rolled titanium foil is about 600mm.
The width of the titanium foil is cut according to the requirements of the user.But the wider the manufacturing, the higher the productivity.
Titanium foil is mainly used in aerospace, navigation, nuclear power, electronics, chemical industry, petroleum, precision manufacturing, medical pharmaceutical and other aspects.
- Περιγραφή: __________
- Προδιαγραφές
- Εξέταση
Titanium foil – Preparation Method
The raw material for industrially producing titanium is mainly rutile ore or high titanium slag (containing 92% or more of Ti02). Titanium sponge production process is based on high titanium slag and petroleum coke as raw material for the production of titanium tetrachloride. Titanium sponge can be obtained by reducing refined titanium tetrachloride with magnesium or sodium in a rare gas stream.
Magnesium reduction distillation method: the proportion of high titanium slag and petroleum coke is 100 (30~33), and the mixture is broken to less than 160 mesh, and sent to the fluidized bed chlorination furnace, and the chlorine gas is passed through the bottom of the furnace, uniformly enter the reaction section of the furnace body, and react with the mixed material of high titanium slag and petroleum coke. The reaction temperature was about 850 °c. The generated titanium tetrachloride gas is discharged from the top of the furnace and enters two separator dust collectors connected in series, so that high boiling points such as iron trichloride, iron dichloride, manganese dichloride and aluminum trichloride mixed in the titanium tetrachloride gas are deposited at the bottom of the separator dust collector. The gas was reintroduced into the two sets of condensers connected in series, and the titanium tetrachloride gas was cooled to below 136 ° C. To obtain a crude titanium tetrachloride solution. The low-boiling matters, such as silicon tetrachloride, therein are distilled off by means of a float valve column distillation. After heating to 140 ° C. In a copper chip Tower, the gasified titanium tetrachloride is passed into a copper chip Tower, and the contained impurity vanadyl trichloride is reduced by copper to a low-valent chloride of vanadium. The purified titanium tetrachloride gas discharged from the top of the column was subjected to a reduction reaction with magnesium in a rare gas stream at about 900 ° C. To obtain titanium sponge. Since the resulting sponge-like titanium also contains magnesium chloride as a by-product and unreacted magnesium, the sponge-like titanium must be placed under a vacuum of 0.1 προς 10-3 Pa, the impurities were separated from the titanium by heating to about 1000 °c.
Titanium foil – Use
titanium alloy has high strength, a large number of structural materials used in the manufacture of military supersonic aircraft, compression Components of jet engines, components of aircraft frames, housings, fire barriers, rivets, structural components of air transport equipment, there is a “space metal”; Military facilities and military ships armored plate and propeller blades. In the civilian industry, titanium and its alloys can be used in the manufacture of various pumps, valves, filtration, evaporation equipment wire mesh and various machine parts. Powdered titanium can be used as an oxygen scavenger in the electron tube manufacturing process.
Titanium foil – Safety
hazard code: flammable solid. GB4.1 class 41505. UN NO.2678 (strontium powder). IMDG CODE P. 4177, Class 4.1. Each batch of product should be divided into galvanized iron barrels lined with plastic film, and the weight of each (piece) of the drum is 70~250, and it is sealed with a large open cover. Magnesium reduction titanium must be evacuated and filled with argon in the barrel after packaging. Titanium can be protected without argon by sodium reduction. “Moisture-proof” shall be indicated on the outside of the packaging barrel. Should be stored in a ventilated, dry warehouse. Shall not be stacked in the open air, and shall not be mixed with acid, alkali and other corrosive substances. During the transport process, it is necessary to prevent rain and humidity. During loading and unloading, care should be taken to prevent breakage of the packaging barrel. Titanium tetrachloride used in the production process can make people suffering from chronic bronchitis, chronic hypertrophic rhinitis, pharyngitis. Autonomic nervous system dysfunction, increased tendon reflexes, tremor of the eyelids and hands, hyperhidrosis. Thermal burns were more difficult to heal when exposed to 10% titanium tetrachloride solution. When exposed to titanium tetrachloride smoke, wear an industrial filter gas mask. To protect the eyes and skin. If you accidentally spatter on the skin, wipe it off with cotton gauze and then wash it thoroughly with water. Production equipment should be closed and the workshop should be well ventilated. Dry powder and dry sand can be used to put out the fire, and water, foam and carbon dioxide are strictly prohibited. In case of high heat or intense combustion, explosion may be caused by water suppression.
Titanium foil is a titanium plate, strip, roll or sheet with a thickness of less than or equal to 0.2mm. The maximum width of rolled titanium foil is about 600mm.
The width of the titanium foil is cut according to the requirements of the user.But the wider the manufacturing, the higher the productivity.
Titanium foil is mainly used in aerospace, navigation, nuclear power, electronics, chemical industry, petroleum, precision manufacturing, medical pharmaceutical and other aspects.
Titanium alloy has high strength and low density, good mechanical properties, good toughness and corrosion resistance.
The two most prominent advantages of titanium are high specific strength and strong corrosion resistance, which determines that titanium must have broad application prospects in aerospace, weaponry, energy, χημικός, metallurgy, construction and transportation. The rich reserves provide a resource base for the wide application of titanium.
Περιγραφή: __________ | Titanium foil |
Υλικός | Γρ1, Τέχνη, Gr3,Gr4,Gr5, GR7, Gr6,Gr9, Γρ11, Γρ12 ,Gr16, Gr17,Gr25TA0,TA1,TA2,TA5,TA6,TA7,TA9,TA10,TB2,TC1,TC2,TC3,TC4 |
Πρότυπο | ASTM B265,ASME SB265,DIN17851,TiA16Zr5Mo1.5,JIS4100-2007,GB3461-2007 |
Μέγεθος | Thickness:0.05-0.2mmWidth:3-600χιλ.
Μήκος:according to requirements |
MOQ | 100 Kilogram/Kilogrames |
Equepment used | CNC lathes, Milling machine, Machining Center,Thread rolling machine Magnetic needle polishing machine |
Χαρακτηριστικά | 1.high corrosion resistance2.low density
3.non-ferromagnetic 4.good biocompatibility |
Πακέτο | Standard export package,suit for all kinds of transport ,or as required. |
Εφαρμογή | 1.Based on High intensity,titanium products tensile strength can be up to 180Kg/mm².2.Titanium and titanium alloy in aviation industry, is called “space metal”; Επιπλέον,
in the shipbuilding industry, chemical industry, manufacturing machinery parts, telecommunications equipment, hard alloy, etc have increasingly extensive application 3.Επιπλέον, because of the titanium alloy with the human body has very good compatibility, so the titanium alloy can also be artificial bone. |
Χημική σύνθεση:
Composition (%) | C | N | Fe | O | H | Al | V | Ti |
GR1 | ≤0.08 | ≤0.03 | ≤0.20 | ≤0.18 | ≤0.015 | – | – | Bal. |
GR2 | ≤0.08 | ≤0.03 | ≤0.30 | ≤0.25 | ≤0.015 | – | – | Bal. |
GR5 | ≤0.10 | ≤0.05 | ≤0.30 | ≤0.20 | ≤0.015 | 5.50-6.80 | 3.50-4.50 | Bal. |
Χαρακτηριστικά
|
The density of titanium is 4.506-4.516g/cm^3, melting point is 1668, boiling point is 3535. Therefore Titanium have low
weight,excellent high strength and nonmagnetic festures, low density, excellent corrosion resistance features, high specific strength and high temperature resistance features, so it is widely used in chemical industry field, medical field, electronics manufacture, mechanical parts field, automobile industry, and aerospace field, κλπ. |
Σχετικά Προϊόντα
-
Διαβάστε ΠερισσότεραΓρήγορη προβολή
Stainless Steel Sheets
Stainless Steel Sheets & Plates are made up of austenitic steel mainly contain chromium and nickel with the addition of rare elements which offer high corrosion resistance, high tensile strength, excellent impact & toughness and high-temperature resistance at cryogenic temperatures. Moreover, these SS Sheets & Plates are highly demanded in various industries like chemical & food processing, heat exchangers, fresh & saltwater marine environments, automobiles and more.
-
Διαβάστε ΠερισσότεραΓρήγορη προβολή
Brass Coil
Brass coil has excellent plasticity (best in brass) and high strength, good machinability, easy to weld, very stable to general corrosion, but prone to corrosion cracking; brass coil is copper and the alloy of zinc is named for its yellow color.
The mechanical properties and wear resistance of the brass coil are very good, and can be used to manufacture precision instruments, ship parts, shells of guns, κλπ. Brass knocks up and sounds good, so instruments such as cymbals, cymbals, bells, and numbers are made of brass. According to the chemical composition, brass is divided into ordinary copper and special brass.
-
Διαβάστε ΠερισσότεραΓρήγορη προβολή
Brass Bar
-
Διαβάστε ΠερισσότεραΓρήγορη προβολή
Copper Coils
It may seem that a copper coil is a simple piece of coiled wire that can be wound and put to use. As with any form of industrial product, copper coils have to be precisely engineered to fit an application. The winding process has to be completed with precision to ensure the proper distance between the wires and the diameter of the opening.
Each product that uses copper coils requires that a certain number of turns be made to provide the correct amount of resistance. Inaccurate calculations can lead to inefficiency and possible failure of the coil or device. For this reason, the engineers at Metal Associates guarantee that they have closely examined the specification of an application such that the diameter, spacing, wire thickness, and number of turns exactly matches the design of the product where the copper coil will be used.
-
Διαβάστε ΠερισσότεραΓρήγορη προβολή
Stainless Steel Strips
Hot Rolled Stainless Steel Strips are produced from hot rolling billets or slabs and then use a cold rolling process. These processes improve strips mechanical properties such as stiffness coefficient and flexibility. Cold Rolled Stainless Steel Strips are obtained from annealed and pickled by cold rolling on polished rolls. As per the required thickness, cold rolling requires a number of passes through mill to effect reduction.
We supply SS Strips in various industries including food industries, χημικός, electrical, generator, shaft, cement & gas industries. The offered these Stainless Steel Strips in standards as well as customized dimensions as per the client’s requirement.
-
Διαβάστε ΠερισσότεραΓρήγορη προβολή
Stainless Steel Foil
Stainless steel foils are thin strips of stainless steel that are less than 0.2 mm in thickness and less than 300 mm in width.
Stainless steel foils offer a variety of advantages, including chemical stability, high strength-to-weight ratio, electrical insulation and corrosion resistance.
Stainless steel foil is used in the production of heat exchangers, capacitors and fuel cells; as well as in medical equipment and food processing machinery.
Stainless steel foils are a versatile material with many advantages. Its high corrosion resistance, good thermal and electrical conductivities and its ductility makes it an excellent choice for a wide range of applications.
Stainless steel foil is available in several different grades. These include austenitic series, ferritic series, martensitic series, duplex and super duplex series. Each grade has different alloying elements that contribute to the properties of the foil.
The most common grades of stainless steel foils are 304 και 316. These grades are supplied in thicknesses ranging from 0.009mm to 0.3mm. Other grades of stainless steel foil are also available upon request including 409, 430 and duplex 2205.
-
Διαβάστε ΠερισσότεραΓρήγορη προβολή
Copper Strips
Copper strips have high electrical and thermal conductivity, that’s why copper strips are the best for transformer winding.
What’s more, copper strips transfer heat more effectively than other metals strips.
Copper strips are more malleable and have high tensile strength. Corrosion resistance, high degree stability, and heat dissipation of copper strips are superior to other metals.
Copper strips are mostly used in the electrical and electronics sectors because copper is non-magnetic and non-sparking. Copper strips are mostly used in heat exchangers, transformers winding, condensers, and lightning conductors.
Copper strip thickness range from 0.03mm to 3.0mm. Copper strips can be manufactured in different widths and thicknesses per the customer’s requirement.
Εάν υπάρχουν ερωτήσεις, Μη διστάσετε να επικοινωνήσετε μαζί μας sales@grandsteeltube.com
-
Διαβάστε ΠερισσότεραΓρήγορη προβολή
Copper Rod
Copper bar is a kind of non-ferrous metal processing bar, which has better processing performance and high conductivity. It is mainly divided into brass rod (copper zinc alloy, cheaper), purple copper rod (higher copper content).
Brass rod is a rod shaped object made of copper and zinc alloy, named for its yellow color. The melting point of brass, which contains 56% προς 68% copper, is 934 προς 967 Βαθμούς. Brass has good mechanical properties and wear resistance, and can be used to manufacture precision instruments, ship parts, gun casings and so on. Used in air conditioning pipe, refrigerator pipe, oil pipe, water supply pipe and all kinds of mechanical materials, automotive synchronizer gear ring, Marine pump, valve, structural parts, friction accessories, κλπ.
Purple copper rod is named for its purple red color. It has good electric conductivity, heat conduction, corrosion resistance and processing properties. It can be welded and brazed. Characteristics: high purity, fine structure, low oxygen content. No porosity, trachoma, loose, excellent electrical conductivity, high precision of electroetching mold surface, after heat treatment process, no direction of the electrode, suitable for fine play, fine play, with good thermoelectric channel, processability, ductility, corrosion resistance and weather resistance.
-
Διαβάστε ΠερισσότεραΓρήγορη προβολή
Aluminium foil
Aluminium foil is aluminium prepared in thin metal leaves with a thickness of less than 0.2mm (7.9 mils); thinner gauges down to 4 micrometers are also commonly used. Standard household foil is typically 0.016 χιλ. (0.63 mils) thick, and heavy-duty household foil is typically 0.024 χιλ. (0.94 mils). And the air conditioner foil can be thinner than 0.0047mm, and some food foil thinner than 0.002mm. The foil is pliable and can be readily bent or wrapped around objects. Thin foils are fragile and are sometimes laminated with other materials such as plastics or paper to make them stronger and more useful. It’s used industrially for a variety of purposes, including packing, insulation and transportation. At home, people use aluminum foil for food storage, to cover baking surfaces and to wrap foods, such as meats, to prevent them from losing moisture while cooking.
-
Διαβάστε ΠερισσότεραΓρήγορη προβολή
Titanium Bar
- DIN2391 Χαλύβδινος σωλήνας ακριβείας
- EN10305-1 / 4 Χαλύβδινος σωλήνας ακριβείας
- EN10305-2 / 3 / 5 / 6 Σωλήνες ακριβείας
- Σωλήνες ακριβείας σειράς SAE
- ISO8535-1 Σωλήνας έγχυσης καυσίμου
- Μονός/Ντουλμπέ Τοίχος Bundy Σωλήνας
- Λέβητας & Σωλήνες χάλυβα πίεσης
- Χαλύβδινος σωλήνας χωρίς ραφή / SRB
- Σωλήνες από ανοξείδωτο τριχοειδές χάλυβα
- Ανοξείδωτοι σωλήνες χωρίς ραφή & Σωλήνες
- Συγκολλημένοι ανοξείδωτοι σωλήνες & Σωλήνες
- Ένεση & Σωλήνες γραμμής ελέγχου
- Σωλήνες από κράμα νικελίου & Σωλήνες
- Μη σιδηρούχα τριχοειδή σωληνάρια
- Σωλήνες Αλουμινίου & Σωλήνες
- Ορειχάλκινοι Σωλήνες & Σωλήνες
- Χαλκοσωλήνες & Σωλήνες
- Σωλήνες τιτανίου & Σωλήνες
- Εξωθημένος/συγκολλημένος σωλήνας πτερυγίων
- Μη σιδηρούχα σωλήνας ακριβείας
- Χαλύβδινοι Σωλήνες Ειδικού Σχήματος
- Μεταλλικό πηνίο /φύλλο / φύλλο / λωρίδα