Επιχρωμιωμένες στρογγυλές ράβδοι
Chrome plated round bar is mostly designed to be used for hydraulic piston rod and pneumatic piston rod manufacturing and repairing. So some people also may call this product hydraulic cylinder rod approximately.
Όμως, besides the above, chrome plated rods can also be used in applications where high performance surface finishing and high accuracy dimension tolerance are required.
Here below is the application list of the chrome rods:
- Hydraulic cylinders (chrome plated piston rods)
- Pneumatic cylinders / air cylinders (chrome plated piston rods)
- Guide rods for plastic manufacturing machine and hydraulic machinery
- Rollers for machines, such as packing machine rollers, printing machine rollers
- Shaft for machinery, such as Textile machinery center axle, Transport machinery center axle, κλπ.
- Ejector rods for injection molding machines
- Vibration absorbers and pistons for some industrial machinery.
Εάν υπάρχουν ερωτήσεις,παρακαλώ επικοινωνήστε μαζί μας sales@grandsteeltube.com
- Περιγραφή: __________
- Advantages of Chrome Plated Bars
- Προδιαγραφές
- Εξέταση
Υλικός: | CK45, SAE1045, 4140, 4340, JIS45C, 40Cr, 20MnV6, 42CrMo, SS431, SS430, Stainless Steel 304/316/2205, κλπ. |
Diameter: | Φ 6-500mm |
Μήκος: | max 12m |
Chrome layer: | 20 μικρόν (min) προς 100 μικρόν |
Hardness of the chrome layer: | 850 HV (min) – 1150 HV |
Roughness: | Ra ≤ 0.2μm |
Straightness: | ≤ 0.5/1000 |
Diameter tolerance: | ISO f7/h8/g6 |
Roundness: | Half of the tolerance ISO f7 |
Delivery condition: | Hard Chrome Piston Rod ( HRC 15-20) |
Quenched & Tempered (Q+T) Rod (HRC 28-32) | |
Induction Hardened Rod (HRC 55-62) | |
Q+T Induction Hardened Rod (HRC 60-65) | |
Corrosion resistance: | Test in natural salt spray according to ASTM B 117-96 hours. |
Πακετάρισμα: | Anti-rust oil to be spread on rod surface and each rod to be packed in paper roll and then in wooden case. |
1. Carbon steel balances durability, hardness, and wear resistance using formability, συγκολλητικότητα, and durability;
2. Chrome plating provides corrosion resistance along with an Extremely reflective look
3. High precision tolerances, which ensures when used to make hydraulic piston rod, it can fit the cylinder precisely.
4. Good Hardness: the surface hardness attaining HV850 minimal and upward, which not only help improve wear resistance but also help extend the life span of these chrome plated rods, thereby helping the consumer save the cost.
5. High performance of strength: The yield strength of chrome plated bars can be 75000 psi up to 100000 ψι.
Εάν υπάρχουν ερωτήσεις,είστε περισσότερο από ευπρόσδεκτοι να επικοινωνήσετε sales@grandsteeltube.com
CHEMICAL COMPOSITION (%) |
|||||||
Υλικός |
C% |
Mn% |
Si% |
S% |
P% |
V% |
Cr% |
<= |
|||||||
CK45 |
0.42-0.50 |
0.50-0.80 |
0.17-0.37 |
0.035 |
0.035 |
||
ST52 |
<=0.22 |
<=1.6 |
<=0.55 |
0.035 |
0.035 |
||
20MnV6 |
0.16-0.22 |
1.30-1.70 |
0.10-0.50 |
0.035 |
0.035 |
0.10-0.20 |
|
42CrMo4 |
0.38-0.45 |
0.60-0.90 |
0.15-0.40 |
0.03 |
0.03 |
0.90-1.20 |
|
4140 |
0.38-0.43 |
0.75-1.0 |
0.15-0.35 |
0.04 |
0.04 |
0.80-1.10 |
|
40Cr |
0.37-0.45 |
0.50-0.80 |
0.17-0.37 |
0.80-1.10 |
MECHANICAL PROPERTIES |
|||||
Υλικός |
T.S. Mpa |
Y.S. Mpa |
E% |
Impact |
Condition |
(min) |
|||||
CK45 |
610 |
355 |
15 |
>39J |
Hot Rolled |
CK45 |
800 |
630 |
20 |
>41J |
Q+T |
ST52 |
630 |
520 |
14 |
Cold Drawn | |
20MnV6 |
750 |
590 |
12 |
>40J |
Hot Rolled |
42CrMo4 |
980 |
850 |
14 |
>47J |
Q+T |
4140 |
1080 |
930 |
12 |
Q+T | |
40Cr |
1000 |
800 |
10 |
Q+T |
Εάν υπάρχουν ερωτήσεις,είστε περισσότερο από ευπρόσδεκτοι να επικοινωνήσετε sales@grandsteeltube.com
Σχετικά Προϊόντα
-
Διαβάστε ΠερισσότεραΓρήγορη προβολή
Oil Cylinder Steel Tubes
Applications of Hydraulic honed tubing
Honed tubing and SRB tubes (skived and roller burnished tubes) are mostly used as cylinder tube, such as hydraulic cylinder tube and pneumatic cylinder tubing, which are widely used for manufacturing and repairing hydraulic cylinders and pneumatic cylinders. As honed tube has very accuracy dimension tolerance and good surface smoothness, so this product is also used in applications where precision dimension or high smooth surface is need.
Εάν υπάρχουν ερωτήσεις,παρακαλώ επικοινωνήστε μαζί μας sales@grandsteeltube.com
-
Διαβάστε ΠερισσότεραΓρήγορη προβολή
CK45 Chrome Plated Bar
-
Διαβάστε ΠερισσότεραΓρήγορη προβολή
4140 hard chrome plated rod
Steel 4140 is AISI standard grade, it is a kind of alloy structural steel, equivalent to China standard GB 42CrMo.
SAE 4140 alloy steel has high fatigue strength and low notch sensitivity, high low temperature impact toughness, no obvious temper brittleness, and is mainly used in the quenched and tempered state. It is used to manufacture high-strength parts and parts with large cross-sections and other stress-bearing components under impact load. Such as high strength Hydraulic cylinder rods, penaumatic cylinder rods, the transmission eccentric shaft of the horizontal forging machine, the crankshaft of the forging press, κλπ.4140 chrome plated rod is manufactured through SAE 4140 steel bar, by using high precision centerless grinding and polishing methods, and then chrome plated to a min. plating thickness of 20 microns (0.0008″), 25 microns (0.001″), or other. The chrome plating layer provides corrosion resistance and a highly reflective appearance.
4140 chrome plated rods are used widely by the hydraulic industries and pneumatic industries, and is also widely usually used for applications where high yield strength and tensile strength is required.
-
Διαβάστε ΠερισσότεραΓρήγορη προβολή
Σωλήνας κυλίνδρου αέρα
Το κοινό κράμα αριθ.. της σωλήνωσης κυλίνδρου αέρα είναι 6063 και 6061. Είναι και οι δύο εξαιρετικοί στη δυνατότητα διαμόρφωσης, συγκολλητικότητα, και αντοχή στη διάβρωση μαζί με εξαιρετική εμφάνιση.
Grand επίσης ικανό να εξωθήσει άλλα κράματα όχι. για σωλήνες κυλίνδρων αέρα, για παράδειγμα, 7000 σειρά, 5000 σειρά, 3000 σειρά, 2000 σειρά, και 1000 σειρά, Συμβουλευτείτε τους ειδικούς μηχανικούς μας για να λάβετε περισσότερες πληροφορίες σχετικά με αυτό το εξαιρετικό κράμα αλουμινίου Όχι.
-
Διαβάστε ΠερισσότεραΓρήγορη προβολή
Hydraulic Cylinder Tubes
Applications of Hydraulic honed tubing
Honed tubing and SRB tubes (skived and roller burnished tubes) are mostly used as cylinder tube, such as hydraulic cylinder tube and pneumatic cylinder tubing, which are widely used for manufacturing and repairing hydraulic cylinders and pneumatic cylinders. As honed tube usually has very accuracy dimension tolerance and good surface smoothness, so this product is also used in applications where precision dimension or high smooth surface is need.
Εάν υπάρχουν ερωτήσεις,παρακαλώ επικοινωνήστε μαζί μας sales@grandsteeltube.com
-
Διαβάστε ΠερισσότεραΓρήγορη προβολή
Ανοξείδωτοι σωλήνες κυλίνδρων
Ο πνευματικός σωλήνας κυλίνδρων ανοξείδωτου παράγεται από τον άνευ ραφής ή συγκολλημένο ανοξείδωτο μέσω της προσεκτικής διαδικασίας παραγωγής.
Κύρια τάξη:TP304/304L, TP316/316L,1.4301,1.4304,1.4401,1.4404
Μέγεθος:OD9.53mm131mm με WT: 0.635-5χιλ.. 3M ή 6M ως μήκος.
ASTM A269 και με ανοχή ID H10 ή H11.
Η τραχύτητα OD ≤Ra 0.8 και ID ≤8 Ra 0.4
Το Grand μπορεί να ανταποκριθεί στις μηχανικές ιδιότητες όπως η σκληρότητα,
Εφελκυσμό, Αντοχή διαρροής, επιμήκυνση και ωοειδή κ.λπ..
Εάν υπάρχουν ερωτήσεις,παρακαλώ επικοινωνήστε μαζί μας sales@grandsteeltube.com
-
Διαβάστε ΠερισσότεραΓρήγορη προβολή
Skived & Roller Burnished Tube
Applications of Hydraulic honed tubing
Honed tubing and SRB tubes (skived and roller burnished tubes) are mostly used as cylinder tubes, such as hydraulic cylinder tubes and pneumatic cylinder tubings which are widely used for manufacturing and repairing hydraulic cylinders and pneumatic cylinders. As honed tube usually has very accuracy dimension tolerance and good surface smoothness, so this product is also used where precision dimension or high smooth surface is needed.
Εάν υπάρχουν ερωτήσεις,παρακαλώ επικοινωνήστε μαζί μας sales@grandsteeltube.com
- DIN2391 Χαλύβδινος σωλήνας ακριβείας
- EN10305-1 / 4 Χαλύβδινος σωλήνας ακριβείας
- EN10305-2 / 3 / 5 / 6 Σωλήνες ακριβείας
- Σωλήνες ακριβείας σειράς SAE
- ISO8535-1 Σωλήνας έγχυσης καυσίμου
- Μονός/Ντουλμπέ Τοίχος Bundy Σωλήνας
- Λέβητας & Σωλήνες χάλυβα πίεσης
- Χαλύβδινος σωλήνας χωρίς ραφή / SRB
- Σωλήνες από ανοξείδωτο τριχοειδές χάλυβα
- Ανοξείδωτοι σωλήνες χωρίς ραφή & Σωλήνες
- Συγκολλημένοι ανοξείδωτοι σωλήνες & Σωλήνες
- Ένεση & Σωλήνες γραμμής ελέγχου
- Σωλήνες από κράμα νικελίου & Σωλήνες
- Μη σιδηρούχα τριχοειδή σωληνάρια
- Σωλήνες Αλουμινίου & Σωλήνες
- Ορειχάλκινοι Σωλήνες & Σωλήνες
- Χαλκοσωλήνες & Σωλήνες
- Σωλήνες τιτανίου & Σωλήνες
- Εξωθημένος/συγκολλημένος σωλήνας πτερυγίων
- Μη σιδηρούχα σωλήνας ακριβείας
- Χαλύβδινοι Σωλήνες Ειδικού Σχήματος
- Μεταλλικό πηνίο /φύλλο / φύλλο / λωρίδα