Stainless Steel Strip is an austenitic chromium-nickel-manganese stainless steel that offers electromagnetic properties like electrical resistivity, magnetic permeability & electrical conductivity and Young’s Modulus of Elasticity. We offer these stainless steel strips in various material grades such as Stainless Steel 304 Strips, Rustfrit stål 310 Strips, Rustfrit stål 316 Strips, Rustfrit stål 904 Strips and many more.
Titanium Foil
Titanium foil is a titanium plate, Strip, roll or sheet with a thickness of less than or equal to 0.2mm. The maximum width of rolled titanium foil is about 600mm.
The width of the titanium foil is cut according to the requirements of the user.But the wider the manufacturing, the higher the productivity.
Titanium foil is mainly used in aerospace, navigation, nuclear power, electronics, kemisk industri, petroleum, precision manufacturing, medical pharmaceutical and other aspects.
- Beskrivelse: __________
- Specifikationer
- Undersøgelse
Titanium foil – Preparation Method
The raw material for industrially producing titanium is mainly rutile ore or high titanium slag (containing 92% or more of Ti02). Titanium sponge production process is based on high titanium slag and petroleum coke as raw material for the production of titanium tetrachloride. Titanium sponge can be obtained by reducing refined titanium tetrachloride with magnesium or sodium in a rare gas stream.
Magnesium reduction distillation method: the proportion of high titanium slag and petroleum coke is 100 (30~33), and the mixture is broken to less than 160 mesh, and sent to the fluidized bed chlorination furnace, and the chlorine gas is passed through the bottom of the furnace, uniformly enter the reaction section of the furnace body, and react with the mixed material of high titanium slag and petroleum coke. The reaction temperature was about 850 °c. The generated titanium tetrachloride gas is discharged from the top of the furnace and enters two separator dust collectors connected in series, so that high boiling points such as iron trichloride, iron dichloride, manganese dichloride and aluminum trichloride mixed in the titanium tetrachloride gas are deposited at the bottom of the separator dust collector. The gas was reintroduced into the two sets of condensers connected in series, and the titanium tetrachloride gas was cooled to below 136 ° C. To obtain a crude titanium tetrachloride solution. The low-boiling matters, such as silicon tetrachloride, therein are distilled off by means of a float valve column distillation. After heating to 140 ° C. In a copper chip Tower, the gasified titanium tetrachloride is passed into a copper chip Tower, and the contained impurity vanadyl trichloride is reduced by copper to a low-valent chloride of vanadium. The purified titanium tetrachloride gas discharged from the top of the column was subjected to a reduction reaction with magnesium in a rare gas stream at about 900 ° C. To obtain titanium sponge. Since the resulting sponge-like titanium also contains magnesium chloride as a by-product and unreacted magnesium, the sponge-like titanium must be placed under a vacuum of 0.1 til 10-3 Pa, the impurities were separated from the titanium by heating to about 1000 °c.
Titanium foil – Use
titanium alloy has high strength, a large number of structural materials used in the manufacture of military supersonic aircraft, compression Components of jet engines, components of aircraft frames, housings, fire barriers, rivets, structural components of air transport equipment, there is a “space metal”; Military facilities and military ships armored plate and propeller blades. In the civilian industry, titanium and its alloys can be used in the manufacture of various pumps, Ventiler, filtration, evaporation equipment wire mesh and various machine parts. Powdered titanium can be used as an oxygen scavenger in the electron tube manufacturing process.
Titanium foil – Safety
hazard code: flammable solid. GB4.1 class 41505. UN NO.2678 (strontium powder). IMDG CODE P. 4177, Class 4.1. Each batch of product should be divided into galvanized iron barrels lined with plastic film, and the weight of each (piece) of the drum is 70~250, and it is sealed with a large open cover. Magnesium reduction titanium must be evacuated and filled with argon in the barrel after packaging. Titanium can be protected without argon by sodium reduction. “Moisture-proof” shall be indicated on the outside of the packaging barrel. Should be stored in a ventilated, dry warehouse. Shall not be stacked in the open air, and shall not be mixed with acid, alkali and other corrosive substances. During the transport process, it is necessary to prevent rain and humidity. During loading and unloading, care should be taken to prevent breakage of the packaging barrel. Titanium tetrachloride used in the production process can make people suffering from chronic bronchitis, chronic hypertrophic rhinitis, pharyngitis. Autonomic nervous system dysfunction, increased tendon reflexes, tremor of the eyelids and hands, hyperhidrosis. Thermal burns were more difficult to heal when exposed to 10% titanium tetrachloride solution. When exposed to titanium tetrachloride smoke, wear an industrial filter gas mask. To protect the eyes and skin. If you accidentally spatter on the skin, wipe it off with cotton gauze and then wash it thoroughly with water. Production equipment should be closed and the workshop should be well ventilated. Dry powder and dry sand can be used to put out the fire, and water, foam and carbon dioxide are strictly prohibited. In case of high heat or intense combustion, explosion may be caused by water suppression.
Titanium foil is a titanium plate, Strip, roll or sheet with a thickness of less than or equal to 0.2mm. The maximum width of rolled titanium foil is about 600mm.
The width of the titanium foil is cut according to the requirements of the user.But the wider the manufacturing, the higher the productivity.
Titanium foil is mainly used in aerospace, navigation, nuclear power, electronics, kemisk industri, petroleum, precision manufacturing, medical pharmaceutical and other aspects.
Titanium alloy has high strength and low density, good mechanical properties, good toughness and corrosion resistance.
The two most prominent advantages of titanium are high specific strength and strong corrosion resistance, which determines that titanium must have broad application prospects in aerospace, weaponry, energy, kemisk, metallurgy, construction and transportation. The rich reserves provide a resource base for the wide application of titanium.
Beskrivelse: __________ | Titanium foil |
Materiale | Gr1, Gr2, Gr3,Gr4,Gr5, Gr7, Gr6,Gr9, Gr11, Gr12 ,Gr16, Gr17,Gr25TA0,TA1,TA2,TA5,TA6,TA7,TA9,TA10,TB2,TC1,TC2,TC3,TC4 |
Norm | ASTM B265,ASME SB265,DIN17851,TiA16Zr5Mo1.5,JIS4100-2007,GB3461-2007 |
Størrelse | Tykkelse:0.05-0.2mmWidth:3-600Mm
Længde:according to requirements |
MOQ | 100 Kilogram/Kilogrames |
Equepment used | CNC lathes, Milling machine, Machining Center,Thread rolling machine Magnetic needle polishing machine |
Funktioner | 1.high corrosion resistance2.low density
3.non-ferromagnetic 4.good biocompatibility |
Pakke | Standard export package,suit for all kinds of transport ,or as required. |
Ansøgning | 1.Based on High intensity,titanium products tensile strength can be up to 180Kg/mm².2.Titanium and titanium alloy in aviation industry, is called “space metal”; Derudover,
in the shipbuilding industry, kemisk industri, manufacturing machinery parts, telecommunications equipment, hard alloy, etc have increasingly extensive application 3.Derudover, because of the titanium alloy with the human body has very good compatibility, so the titanium alloy can also be artificial bone. |
Kemisk sammensætning:
Composition (%) | C | N | Fe | O | H | Al | V | Ti |
GR1 | ≤0.08 | ≤0.03 | ≤0.20 | ≤0.18 | ≤0.015 | – | – | Bal. |
GR2 | ≤0.08 | ≤0.03 | ≤0.30 | ≤0.25 | ≤0.015 | – | – | Bal. |
GR5 | ≤0,10 | ≤0.05 | ≤0.30 | ≤0.20 | ≤0.015 | 5.50-6.80 | 3.50-4.50 | Bal. |
Funktioner
|
The density of titanium is 4.506-4.516g/cm^3, melting point is 1668, boiling point is 3535. Therefore Titanium have low
weight,excellent high strength and nonmagnetic festures, low density, excellent corrosion resistance features, high specific strength and high temperature resistance features, so it is widely used in chemical industry field, medical field, electronics manufacture, mechanical parts field, automobile industry, and aerospace field, osv. |
Relaterede produkter
-
Læs MereHurtigt overblik
Aluminiumsspole
Aluminiumspole er et valset produkt, fremstillet i en oprullet form af en kontinuerlig strimmel, og har en indvendig diameter og ydre diameter. ID fra50mm til 1000mm. Aluminiumslegering kvalitet inklusive 1xxx, 2Xxx, 3Xxx, 4Xxx, 5Xxx, 6Xxx, 7Xxx, 8Xxx. Men den mest almindelige er 1050, 3003, 6061 og 5251 aluminiumspole. Tykkelse fra 0,045-80mm, bredde fra 60-2650mm. Almindelige bredder af aluminiumsspole er 800 mm,1000Mm, 1250Mm,1450mm og 1500mm.
Flere industrier er afhængige af aluminiumsspoler til en række forskellige anvendelser, såsom bilindustrien, byggeri, varmeoverførsel, farmaceutisk, elektrisk, og fødevareindustrien. Sammenlignet med andre materialer, Aluminium er i mange tilfælde et langt overlegent materiale. Aluminiumsspole kan leveres med standard møllefinish, eller det kan børstes, ternet, farve belagt, satin-færdig og anodiseret. Aluminiumsplader eller aluminiumsfolie kan skæres i spoler i henhold til kundens krav.
-
Læs MereHurtigt overblik
Stainless Bar
A stainless steel bar stock is often used for production line machinery or in other industrial settings where durability is required. Stainless steel round bar types can be found in many different shapes such as hexagon, firkant, or round bars. Stainless bar stock is a material that is non-corrosive, corrosion resistant, and durable. It can be used in a variety of industries such as automotive, Aerospace, byggeri, and manufacturing.
Stainless steel bar stock is the highest quality type of stainless steel in the industry. They are made with high-quality materials that make them resistant to corrosion and other environmental conditions. The stainless bar stock also has greater tensile strength than other types of stainless steel.
Stainless steel round rod products or round bars are commonly used for manufacturing products like car rims, motorcycle rims, bicycle rims, og meget mere. These types of bars are typically made by rolling up sheets of stainless steel into long tubes before welding them together at the ends to create round rods or round bars that can be cut into smaller pieces
-
Læs MereHurtigt overblik
Titanium Bar
-
Læs MereHurtigt overblik
Stainless Steel Coil
Stainless steel coil can be divided into cold rolled stainless steel coil and hot rolled stainless steel coil according to different production processes.
According to the materials, they can be divided into austenite, martensite, ferrite and duplex.
Common use stainless steel coils grades are often represented by digital symbols.
There are 200 serie, 300 serie, 400 series and duplex series.
304, 304L, 316 and 316L stainless steel coils are the most popular and economical grades of stainless steels.
Stainless steel 304/304L coils and stainless steel 316/316L coils, along with duplex stainless steel coils offer good corrosion resistance to many chemical environments as well as marine and industrial exposures.
-
Læs MereHurtigt overblik
Copper Foil
Copper is a reddish brown metallic element with outstanding characteristics such as good ductility, Duktilitet, heat and conductivity
Pure copper is a very soft and ductile metal To achieve the required performance, we can alloy with other metals Brass and bronze are widely used copper alloys
Copper foil is made of copper or copper alloy by hot rolling and cold rolling The thickness of copper foil ranges from 0.03mm to 0.2mm, and the width and length can be customized according to customer requirements
-
Læs MereHurtigt overblik
Copper Sheet
Copper sheet is a very workable and malleable form of metal, high in electrical and thermal conductivity, and provides excellent corrosion resistance. A beautiful and versatile metal, copper has been utilized for thousands of years. Historically, it served as a favorite choice in making tools, vessels, and sculptures. Copper is also known for its beautiful patinas. When exposed, unsealed, to an outdoor environment, copper begins to oxidize. This exposure creates beautiful color variations in the form of a patina. The coloring of the patina will change and develop character over time while serving to protect the metal from deterioration. People will also create a patina quickly with the use of chemical mixtures that speed the process up and allow a patina to develop without outdoor exposure. Copper sheets can also be hammered, tooled, or embossed for added texture and decorative or functional appeal and come in many thicknesses from very thin copper foil to thick copper plate. It also comes in many alloys that blend other metals with copper. At Grand Copper, we sell pure copper -C110 (other alloys and tempers available upon request). This high purity provides the premium quality needed for projects and applications in a wide range of industries and uses. We take pride in providing the best material. Our high-quality, affordable material and friendly, first-rate customer service have made us a leader in the industry for over a decade.
-
Læs MereHurtigt overblik
Folie af aluminium
Folie af aluminium er aluminium fremstillet i tynde metalblade med en tykkelse på mindre end 0,2 mm (7.9 Mils); tyndere målere ned til 4 mikrometre er også almindeligt anvendt. Standard husholdningsfolie er typisk 0.016 Mm (0.63 Mils) tyk, og kraftig husholdningsfolie er typisk 0.024 Mm (0.94 Mils). Og klimaanlæggets folie kan være tyndere end 0.0047 mm, og nogle madfolie tyndere end 0.002 mm. Folien er bøjelig og kan let bøjes eller vikles rundt om genstande. Tynde folier er skrøbelige og er undertiden lamineret med andre materialer såsom plast eller papir for at gøre dem stærkere og mere nyttige. Det bruges industrielt til en række forskellige formål, herunder pakning, isolering og transport. Hjemme, Folk bruger aluminiumsfolie til opbevaring af fødevarer, til at dække bageoverflader og til at pakke mad ind, såsom kød, for at forhindre dem i at miste fugt under madlavning.
-
Læs MereHurtigt overblik
Stainless Steel Strips
Hot Rolled Stainless Steel Strips are produced from hot rolling billets or slabs and then use a cold rolling process. These processes improve strips mechanical properties such as stiffness coefficient and flexibility. Cold Rolled Stainless Steel Strips are obtained from annealed and pickled by cold rolling on polished rolls. As per the required thickness, cold rolling requires a number of passes through mill to effect reduction.
We supply SS Strips in various industries including food industries, kemisk, elektrisk, generator, shaft, cement & gas industries. The offered these Stainless Steel Strips in standards as well as customized dimensions as per the client’s requirement.
-
Læs MereHurtigt overblik
Messing bar
-
Læs MereHurtigt overblik
Copper Strips
Copper strips have high electrical and thermal conductivity, that’s why copper strips are the best for transformer winding.
What’s more, copper strips transfer heat more effectively than other metals strips.
Copper strips are more malleable and have high tensile strength. Korrosionsbestandighed, high degree stability, and heat dissipation of copper strips are superior to other metals.
Copper strips are mostly used in the electrical and electronics sectors because copper is non-magnetic and non-sparking. Copper strips are mostly used in heat exchangers, transformers winding, condensers, and lightning conductors.
Copper strip thickness range from 0.03mm to 3.0mm. Copper strips can be manufactured in different widths and thicknesses per the customer’s requirement.
Hvis der er spørgsmål, Du er velkommen til at kontakte sales@grandsteeltube.com
- DIN2391 Præcision stålrør
- EN10305-1/4 Præcisionsstålrør
- EN10305-2/3/5/6 præcisionsrør
- SAE-seriens præcisionsrør
- ISO8535-1 Brændstofindsprøjtningsrør
- Enkelt / Doulbe væg bundy rør
- Kedel & Tryk stålrør
- Sømløst hakket / SRB stålrør
- Rør i rustfrit kapillærstål
- Sømløse rustfrie rør & Rør
- Svejsede rustfrie rør & Rør
- Injektion & Rør til kontrolledninger
- Nikkellegeringsrør & Rør
- Ikke-jernholdige kapillarrør
- Aluminium rør & Rør
- Messing rør & Rør
- Kobberrør & Rør
- Titanium rør & Rør
- Ekstruderet/svejset finnerør
- Ikke-jernholdigt præcisionsrør
- Specielt formede stålrør
- Metallisk spole/folie/plade/strimmel