Skived & Roller Burnished Tube
Ansøgninger om Hydraulisk slebet slange
Slebet slange og SRB-rør (Glidede og rullebrændte rør) are mostly used as cylinder tubes, such as hydraulic cylinder tubes and pneumatic cylinder tubings which are widely used for manufacturing and repairing hydraulic cylinders and pneumatic cylinders. As honed tube usually has very accuracy dimension tolerance and good surface smoothness, so this product is also used where precision dimension or high smooth surface is needed.
Hvis der er spørgsmål,kontakt venligst sales@grandsteeltube.com
- Beskrivelse: __________
- Fordele
- Specifikationer
- Undersøgelse
Skived & Roller Burnished Tube is well known as hydraulic cylinder tube in industries. As Skived & Roller Burnished Tubes are the most important material of manufacturing hydraulic cylinders
We manufacture the Skived & Roller Burnished Tube/honed pipes using our factory’s “Suitable To Hone” Steel Cold Drawn Seamless Tubes (CDS tubes)& Steel Cold Drawn Welded Tubes (CDW tubes). In order to produce extremely precise ID dimensions and smoothly ID surface, the honing process involves using abrasive polishing stones and abrasive paper to remove small amounts of material. Besides the honing process, we also use the SRB process (skiving and roller burnishing) to produce honed tubing.
Skived & Roller Burnished Tube/Honed tube is ready to use for hydraulic cylinder applications without further ID processing.
Production standards:
Hydraulic cylinder tube is made of our factory’s own cold drawn seamless tube (CDS tube)/Steel Cold Drawn Welded Tubes (CDW tubes), by honing process or Skiving & Roller Burnishing process. Mean while the tube is usually produced according to norms as ASTM A513, LARM 2391, LARM 1630, LARM 1629, DK 10216-2, En 519, etc on customer’s request.
Steel Grades:
Baosheng manufactures Honed tubes in a wide range of carbon steel and stainless steel grades.
Carbon steel Honed tubes are available with grades as below:
•SAE 1020 •SAE 1026 •SAE1030/1035
•E355, E255, E215, E235
•ST52.3, St35, ST 52.4, Skt 37.4
Stainless steel Honed tube/Skived & Roller Burnished Tube can be supplied in grades as below:
•TP 304 / 304L •TP316 / 316L•TP 316Ti
Other steel grades of hone tube /honed pipe is available on customer’s request.
Baosheng manufactures honed hydraulic cylinder tube in full range of metric sizes and imperial sizes.
•Metric size honed tubes: I.D 30 mm to I.D 400 Mm, Vægtykkelse 3 – 50 Mm
•Imperial size honed tubes / inch size honed pipe: 1.5” ID – 14.0” Honed ID; 1/8” – 1” wall thickness
•Length: We supply our metric size and imperial size honed tube with random length or fixed length up to 12 Meter.
Hvis der er spørgsmål,Du er mere end velkommen til at kontakte sales@grandsteeltube.com
1. Production of skived & roller burnished tube/honed tube since 2005.
2. Samarbejde med kunder fra Europa,Vestasien,Sydamerika,osv. siden 2006.
3. Prøver kan leveres inden for 15 dage efter bekræftelse
4. 45 dage som produktionsperiode og levering efter ordrebekræftelse.
5. 10,000 meters of pre-honed seamless steel tubes at stock.
6. 200 sizes can be offered from ID:30MmxWT:5mm to ID:400MmxWT:25Mm
7. Tredjeparts inspektion som:TUV,BV,SGS,osv. accepteret
8. Professionelt team hjælper dine særlige rørkrav.
9. Andre beslægtede rør:chrome plated steel bars,chrome plated steel tubes;osv
Hvis der er spørgsmål,Du er mere end velkommen til at kontakte sales@grandsteeltube.com
| Stålkvalitet :ST45(20#) ck45(45#) ST52(16Mn) 27SiMn 25Mn 34CrMo4 | ||||||
| Processing | Cylinder diameter/mm | Længde | Straightness | Size accuracy | Vægtykkelse | Inner bore |
| roughness | ||||||
| Cold-drawn | ID30~ID400 | ≤12m | 0.3~0.8mm/m | EN10305-1 | ±10% | 0.8~1.6um |
| SRB or Honed tube | ID30~ID250
ID250~ID400 |
≤10m | 0.3~0.8mm/m | H8~H9~H10 | ±10% | 0.3~0.8um |
| Mechanical Property | ||||||
| Materiale | Tensile | Yield | Forlængelse | Hårdhed | ||
| strength | strength | |||||
| 20# | 530 N/mm2 | 505N/mm2 | 12% | 175HB | ||
| 45# | 660 N/mm2 | 630N/mm2 | 6% | 207HB | ||
| ST52 | 595 N/mm2 | 570N/mm2 | 9% | 190HB | ||
| 27SiMn | 840 N/mm2 | 805N/mm2 | 7.5% | 230HB | ||
| Honed tube size tolerance | ||||||
| ID size | ID deviation (Mm) | |||||
| H7 | H8 | H9 | H10 | |||
| 30 | +0.021 | +0.033 | +0.052 | +0.084 | ||
| 0 | 0 | 0 | 0 | |||
| >30~50 | +0.025 | +0.039 | +0.062 | +0.100 | ||
| 0 | 0 | 0 | 0 | |||
| >50~80 | +0.030 | +0.046 | +0.074 | +0.120 | ||
| 0 | 0 | 0 | 0 | |||
| >80~120 | +0.035 | +0.054 | +0.087 | +0.140 | ||
| 0 | 0 | 0 | 0 | |||
| >120~180 | +0.040 | +0.063 | +0.100 | +0.160 | ||
| 0 | 0 | 0 | 0 | |||
| >180~250 | +0.046 | +0.072 | +0.115 | +0.185 | ||
| 0 | 0 | 0 | 0 | |||
| >250~315 | +0.052 | +0.081 | +0.130 | +0.210 | ||
| 0 | 0 | 0 | 0 | |||
| >315~400 | +0.0527 | +0.089 | +0.140 | +0.230 | ||
| 0 | 0 | 0 | 0 | |||
Hvis der er spørgsmål,Du er mere end velkommen til at kontakte sales@grandsteeltube.com
Relaterede produkter
-
Læs MereHurtigt overblikCK45 Chrome Plated Bar
-
Læs MereHurtigt overblikHydraulic Cylinder Tubes
Ansøgninger om Hydraulisk slebet slange
Slebet slange og SRB-rør (Glidede og rullebrændte rør) bruges mest som cylinderrør, såsom hydraulisk cylinderrør og pneumatisk cylinderrør, som i vid udstrækning anvendes til fremstilling og reparation af hydrauliske cylindre og pneumatiske cylindre. As honed tube usually has very accuracy dimension tolerance and good surface smoothness, Så dette produkt bruges også i applikationer, hvor der er behov for præcisionsdimension eller høj glat overflade.
Hvis der er spørgsmål,kontakt venligst sales@grandsteeltube.com
-
Læs MereHurtigt overblikForkromede runde stænger
Chrome plated round bar is mostly designed to be used for hydraulic piston rod and pneumatic piston rod manufacturing and repairing. So some people also may call this product hydraulic cylinder rod approximately.
Dog, besides the above, chrome plated rods can also be used in applications where high performance surface finishing and high accuracy dimension tolerance are required.
Here below is the application list of the chrome rods:
- Hydraulic cylinders (chrome plated piston rods)
- Pneumatic cylinders / air cylinders (chrome plated piston rods)
- Guide rods for plastic manufacturing machine and hydraulic machinery
- Rollers for machines, such as packing machine rollers, printing machine rollers
- Shaft for machinery, such as Textile machinery center axle, Transport machinery center axle, osv.
- Ejector rods for injection molding machines
- Vibration absorbers and pistons for some industrial machinery.
Hvis der er spørgsmål,kontakt venligst sales@grandsteeltube.com
-
Læs MereHurtigt overblikOliecylinder stålrør
Ansøgninger om Hydraulisk slebet slange
Slebet slange og SRB-rør (Glidede og rullebrændte rør) bruges mest som cylinderrør, såsom hydraulisk cylinderrør og pneumatisk cylinderrør, som i vid udstrækning anvendes til fremstilling og reparation af hydrauliske cylindre og pneumatiske cylindre. Da slebet rør har meget nøjagtighed, dimensionstolerance og god overfladeglathed, Så dette produkt bruges også i applikationer, hvor der er behov for præcisionsdimension eller høj glat overflade.
Hvis der er spørgsmål,kontakt venligst sales@grandsteeltube.com
-
Læs MereHurtigt overblikLuftcylinder rør
Den almindelige legering Nej. af luftcylinderrør er 6063 og 6061. De er begge gode i formbarhed, svejsbarhed, og korrosionsbestandighed sammen med fremragende udseende.
Grand også i stand til at ekstrudere andre legeringer ingen. til luftcylinderrør, for eksempel, 7000 serie, 5000 serie, 3000 serie, 2000 serie, og 1000 serie, Kontakt vores ekspertingeniører for at få mere info om denne ekstraordinære aluminiumslegering Nej.
-
Læs MereHurtigt overblikRør i rustfrit cylinder
Rustfrit stål pneumatisk cylinderrør er produceret ved sømløs eller svejset rustfri gennem omhyggelig produktionsproces.
Hovedklasse:TP304/304L, TP316/316L,1.4301,1.4304,1.4401,1.4404
Størrelse:OD9.53mm-131mm med WT: 0.635-5Mm. 3M eller 6M som længden.
ASTM A269 og med ID-tolerancen H10 eller H11.
Ruheden OD ≤Ra 0.8 og ID ≤8 Ra 0.4
Grand kan opfylde de mekaniske egenskaber som hårdhed,
Trækstyrke, Flydespænding, forlængelse og ovalitet osv.
Hvis der er spørgsmål,kontakt venligst sales@grandsteeltube.com
-
Læs MereHurtigt overblik4140 hard chrome plated rod
Steel 4140 is AISI standard grade, it is a kind of alloy structural steel, equivalent to China standard GB 42CrMo.
SAE 4140 alloy steel has high fatigue strength and low notch sensitivity, high low temperature impact toughness, no obvious temper brittleness, and is mainly used in the quenched and tempered state. It is used to manufacture high-strength parts and parts with large cross-sections and other stress-bearing components under impact load. Such as high strength Hydraulic cylinder rods, penaumatic cylinder rods, the transmission eccentric shaft of the horizontal forging machine, the crankshaft of the forging press, osv.4140 chrome plated rod is manufactured through SAE 4140 steel bar, by using high precision centerless grinding and polishing methods, and then chrome plated to a min. plating thickness of 20 microns (0.0008″), 25 microns (0.001″), or other. The chrome plating layer provides corrosion resistance and a highly reflective appearance.
4140 chrome plated rods are used widely by the hydraulic industries and pneumatic industries, and is also widely usually used for applications where high yield strength and tensile strength is required.