أنبوب زعنفة مسمار
أنبوب الزعنفة المرصع يتم تصنيعها بواسطة لحام المقاومة من الأزرار على الأنابيب العارية.
يتم تصنيع الزعانف عن طريق لحام مادة الزعنفة التي تعتبر ضرورية مسمار أو قضيب ملحوم في القاعدة إلى الأنبوب بواسطة عملية المقاومة الكهربائية.
يتم إجراء التيار للتدفق عبر الأنبوب وقاعدة الأزرار. الأزرار مصنوعة خصيصا في أشكال لتسهيل عملية اللحام. ذا ستود; أثناء عملية "لحام" الزعانف يتم ضغطها ميكانيكيا على الأنبوب عند نقطة اللحام وبالتالي تسبب رابطة ميكانيكية جيدة جدا. هذا النوع من أنابيب الزعانف تجد تطبيقا جيدا جدا في تطبيقات الضغط العالي ودرجات الحرارة العالية. الرابطة الميكانيكية قوية جدا وبالتالي تجد التطبيق في الأماكن التي يكون فيها الحمل الميكانيكي الشديد, من المتوقع الإجهاد أثناء العملية أو التنظيف وما إلى ذلك.
هذه الأنابيب الزعنفة تجد التطبيق في الأنابيب الزعانف, مبردات الهواء, المبادلات الحرارية وغيرها ويفضل في الصناعات مثل مصافي البتروكيماويات, محطات توليد الطاقة, الصناعات الكيماوية, مصانع الصلب, الخ.
- وصف
- Properties of Studded Fin Tube
- Manufacturing Range
- استخبار
Stud fin tube is made by electrical Resistance welding specially formed Studs(Round pins ) in rows around the tube. The Studs can be supplied in a variety of Sizes and shapes. Also named pin fin tube.Stud tube have a very high heat transfer efficiency.The heat exchange efficiency is equivalent to 2-3 times that of the bare pipe. To increase the surface heat transfer coefficient of flue gas to the furnace tube.Reduce the amount of bare pipes used in these processes. (Heat transfer surface of one studded pipe is equivalent to surface of 4 ل 10 bare pipes).
Studded tubes are generally used in furnaces and boilers where the surface is exposed to a very corrosive environment and where very dirty gas streams require frequent or aggressive cleaning.
Increase efficiency in the process of heat recovery and direct flame hostile atmospheres.
Studded Pipe’s ideal for processes applications where dirty fuels are used and harsh environments in terms of temperature and / or corrosion.Easier cleaning especially for operating cases with very dirty flue gas produced by burning heavy oil, diesel or residual oil.
Its high resistance to harsh environments, such as sections of Sulfuric Acid atmospheres, makes it very useful for the industries mentioned.
Properties of Studded Fin Tubes/Studded Fin Pipe:-
-
Manufacturing Process:- Electric Resistance Welding
-
Fin To Tube Bond:- Excellent
-
Heat Transfer Efficiency:- Excellent
-
Mechanical Resistance:- Excellent (Hence can be frequently cleaned with high pressure jets unlike other fin tubes. Thereby reducing down time and increasing overall life)
-
Corrosion Protection:- Gives excellent corrosion protection to the base tube since it entirely covers the base tube (except bare ends).
-
Temperature Range:- Depending on Properties of material of Fin (Stud) and Pipe
Manufacturing Range (Studded Fin Tube ):-
-
Sr. No
Particulars
Range
1
Base Tube Material
ستانلس ستيل, Carbon Steel, Alloy Steel, Titanium , Copper, Duplex Stainless Steel, Inconel etc. (all material in the theoretical limit)
2
Base Tube Outside Diameter
60 mm to 200 المليمتر
3
Base Tube Thickness
3 mm to 12.70mm Above
4
Base Tube Length
2000 mm Min To 15000 المليمتر
5
Stud Material
Carbon Steel/Stainless Steel/Alloy Steel
6
Stud Thickness
6mm to 16mm
7
Stud Density
15.88mm or 63 Studs Per Plate Per Meter (Can Be Customized to Clients Requirements)
8
Stud Height
12.7mm to 63.5mm
9
Bare Ends
As per Client Requirement
We can supply material on urgent delivery basis because of large stock and relations with raw material suppliers. We use only Prime Quality base tube and Fin Stud Material.
The Stud Fin Tubes/Stud Fin Pipes can be supplied with EN 10204 اون 3.1 and EN 3.2 certifications. We can provide Third Party Inspection from any reputed inspection agency.