Niyobyum Tüpler
The niobium seamless tube produced by this method ensures sufficient thermal process plasticity. The disadvantage of niobium fluidity is avoided by means of small deformation extrusion. Performance and dimensions meet user requirements.
- Tarif
- Grand' Advantages
- Chemical composition & Mechanical Properties
- Soruşturma
Niobium Tube Standard
All niobium and niobium alloys tube products follow standard ASTM B394, such as pure niobium tube (R04200, R04210), Nb1Zr tube (R04251 R04261), Nb10Zr , C-103, Cb-752, C129Y, FS-85, Nb-50Ti and so on.
Ürün Adı
|
High quality seamless small-caliber niobium tube
|
Malzeme
|
Niobium
|
Renk
|
sliver grey
|
Yoğunluk
|
8.6g/cm3
|
Purity
|
Nb1 99.88% Nb2 99.69%
|
Şekil
|
Spool and straight
|
Boyut
|
Dia1.0-10mm,Wallthickness 0.2-5.0mm,Uzunluk
|
Teknik
|
Forged and CNC Machined
|
Yüzey
|
CNC lathe surface.
|
Uygulama
|
1. Electroplating field
|
2. Electonics field
|
|
3. Coationg field.
|
Niobium Tube Technology
|
One of the niobium tube extrusion production method includes the following steps: preparation, a power frequency induction heating (600 + 10˚C), glass powder lubrication, secondary power frequency induction heating (1150 + 10˚C), reaming (reduction of area is not greater than 20.0%), thrid power frequency induction heating (1200 + 10˚C), small deformation, extrusion, extrusion ratio is not more than 10, reduction of area is not greater than 90%) and air cooling technology, finally the hot extrusion process of niobium tube is finished. |
The niobium seamless tube produced by this method ensures sufficient thermal process plasticity. The disadvantage of niobium fluidity is avoided by means of small deformation extrusion. Performance and dimensions meet user requirements. |
1. Production of Tantalum tubes,Niobium tubes,Zirconium tubes since 2010.
2. Almanya'dan müşterilerle çalışma,Fransa,Netherland,U.K.;vb beri 2006.
3. Numuneler içinde teslim edilebilir 10 onaydan sonraki günler
4. 40 üretim süresi olarak gün ve sipariş onayından sonra teslimat.
5. 20,000 meters of Tantalum tubes,Tungsten Tubes,Zirconium Tubes in stock.
6. Boyutlar OD'den sunulabilir:1.00mmxWT:0.15mm için OD:100.00mmxWT:5.00Mm
7. Gibi üçüncü taraf denetimi:TÜV,BV,SGK,vb kabul edilir
8. Profesyonel ekip, özel tüp gereksinimlerinize yardımcı olur.
9. Diğer ilgili tüpler rekabetçi fiyatlarla sunulabilir:Tantalum capillary tubes ,Tungsten capillary tube,Zirconium capillary tubes;ve saire
Chemical Requirements:
Kimyasal bileşim % | ||||||||||||
Designation | Chief component | Impurities less than | ||||||||||
Nb | Fe | Si | Ni | W | Mo | Ti | Ta | O | C | H | N | |
Nb1 | Remainder | 0.004 | 0.002 | 0.002 | 0.004 | 0.004 | 0.002 | 0.07 | 0.015 | 0.005 | 0.0015 | 0.003 |
Nb2 | Remainder | 0.02 | 0.02 | 0.005 | 0.02 | 0.02 | 0.005 | 0.15 | 0.03 | 0.01 | 0.0015 | 0.01 |
Mechnical properties:
Derece(UNS) | Annealed | ||
Tensile strength min, Psi (Mpa) | Yield strength min,Psi (Mpa) | Elongation min, % (1 inch gage length) |
|
R04200 | 18000 (125) | 10500 (73) | 25 |
R04210 Welded | 18000 (125) | 8500 (59) | 25 |
R04210 Seamless | 18000 (125) | 10500 (73) | 25 |
R04251 | 28000(195) | 18000(125) | 20 |
R04261 | 28000(195) | 18000(125) | 20 |
Ürün Adı | Polish 99.95% pure Niobium tube and pipe |
Malzeme | pure niobium and niobium alloy |
Derece | RO4200.RO4210,R04251,R04261 |
Standart | ASTM B393 |
İşlem | Soğuk haddelenmiş, Hot rolled, Ekstrüde |
Characteristic | Erime noktası : 2468°C / Boiling point : 4744°C |
Yoğunluk | 8.6g/cm3 |
Product Features | Excellent Corrosion Resistance , Good resistance to effect of heat |