Tiub Keluli Bundy Dinding Berganda

Bundy tubes are fully monitored during the tube fabrication, and also gone through a series of inspections to make sure they are safe and reliable for hydraulic uses.

Test and inspection items specified in standards of different countries are generally the same or very similar. We manufacture the tubes and issue test reports as per Chinese standard if no other particular requirement comes from buyers.

One thing to note is that the material listed in those standards are slightly different among countries. Low carbon steel is required commonly, but the chemical composition of the material varies, especially for carbon. In most of these countries, the steel grade exists already in their steel industry. In China, there is equivalent steel grades, but we specially developed a steel grade, BHG2, that is much more suitable for the double wall brazed steel tubing manufacture, perfect mechanical properties for the tube forming and also for the final tubes.

When tube is formed and brazed in the continuous production line, instant Eddy current automatic inspection system keeps detecting any potential imperfections of inner structure of the tube. Once the imperfections are detected, they will be automatically shown and notified by the system:

1. An alarm sound is triggered and broadcast by a loud speaker.
2. A flashing alert light on the machine shall be turned on.
3. An automatic online printer shall mark the tube sections with imperfections with ink, then the imperfect tube sections shall be cut and removed.

The following tests shall be done to make sure the tubes are suitable for hydraulic applications of automobiles.

1. Tensile test.
2. Hardness test.
3. Bending test.
4. Expansion test.
5. Developing test.
6. Flattening and bending test.
7. Pressure-proof test.
8. Burst pressure test.

The following tests shall be conducted to determine how the surface coating/plating performs when protecting the tube from corrosion.

1. Coating/plating thickness test.
2. Corrosion resistance test (neutral salt spray, i.e. NSS).
3. Film performance test (varies according to coating/plating types).

Sekiranya ada pertanyaan,anda dialu-alukan untuk menghubungi sales@grandsteeltube.com

Bengkel kami,terletak di Changzhou,meliputi kawasan 13,000 meter persegi dilengkapi dengan kemudahan canggih untuk mengeluarkan tiub keluli bundy dinding berganda dan tiub keluli bundy dinding tunggal. Kapasiti pengeluaran bulanan adalah 3,000,000 Meter.

Bahan-bahannya ialah :SPCC,SPHC,SPCE,BHG1,BHG2,bahan lain boleh dicapai selepas perbincangan.

Terutamanya saiz adalah:4.76x0.70mm,6.35x0.70mm,8x0.70mm,9.53x0.70mm,10x0.70mm,12x0.70mm saiz lain seperti:4.00x0.5mm,3.18x0.7mm,2.60x0.50mm juga dihasilkan mengikut keperluan.Saiz lain boleh dicapai selepas perbincangan.

1. Pengeluaran tiub keluli bundy dinding dua & tiub keluli bundy dinding tunggal sejak itu 2005.

2. Bekerja dengan pelanggan dari Eropah,Asia Barat,Amerika Selatan,sejak 2006etc

3. Sampel boleh dihantar dalam 10 hari selepas pengesahan

4. 40 hari sebagai tempoh pengeluaran dan penghantaran selepas pengesahan pesanan.

5. 200,000 meter tiub keluli bundy bersalut tembaga dalam stok.

6. Saiz boleh ditawarkan dari OD:2.60mmxWT:0.5mm ke OD:12.7mmxWT:1.24Mm

7. Pemeriksaan pihak ketiga seperti:TUV,BV,SGS,dan lain-lain diterima

8. Pasukan profesional membantu keperluan tiub khas anda.

9. Tiub lain yang berkaitan boleh ditawarkan dengan harga yang kompetitif:putih/kuning/zaitun hijau tergalvani tiub bundy dinding berganda,PVF tiub keluli bundy;Dll

Kami telah menghantar tiub ini ke Peru,Perancis,Rusia,Korea Selatan untuk industri automotif,sejak 2006.dll. Sekiranya ada pertanyaan,anda dialu-alukan untuk menghubungi sales@grandsteeltube.com

Tiub Bundy, juga dipanggil paip Bundy, adalah tiub keluli tembaga tembaga dua dinding. Pembuatan tiub Bundy adalah proses berterusan melancarkan jalur keluli bersalut tembaga melalui 720 Darjah, merumput bulatan luar dan dalam jalur bersama-sama dengan lapisan tembaga cair untuk membentuk tiub bulat dengan jahitan bulat berterusan, dan penyepuhlindapan. Kami menggunakan barisan pengeluaran automatik sepenuhnya dengan pemantauan proses dalam talian dan fabrikasi berterusan tiub Bundy.

1.A copper plated steel strip is pulled into the primary tube rollers, and become 720 degrees wrapped after going through a set of the rollers.

2.Then the wrapped tube goes into the welding chamber where the tubes are brazed. The temperature within the chamber is controlled above the copper melting temperature, so the copper layers are melted and spread into the steel surfaces. The tube is heated here in the chamber with protection gas filled so there is no oxidizing of the copper or steel, and also no water will be left to avoid any rust.

3.After the welding stage, the tube goes into the cooling section where it gets cooler, and also it is monitored online simultaneously by the Eddy current scanning device. Any abnormal section shape or un-seamed welding would be observed from the monitor screen.

4.The tubes are finally wound to be easily packed and stocked.

This process of Bundy tube production, compared with other methods, are widely accepted for its high production rate yet instant monitoring of the welding quality.

Sekiranya ada pertanyaan,anda dialu-alukan untuk menghubungi sales@grandsteeltube.com