Tubi in alluminio ottone C68700
Tubi in ottone alluminio inibiti – C68700 – resiste all'azione del sale ad alta velocità e dell'acqua nerastra ed è comunemente usato per i tubi del condensatore. La caratteristica principale di C68700 è la sua elevata resistenza agli attacchi impingement. I tubi di queste leghe sono raccomandati per l'uso nelle centrali elettriche marine e terrestri, in cui le velocità dell'acqua di raffreddamento sono elevate.
In caso di domande,Non esitate a contattare sales@grandsteeltube.com
- Descrizione
- Inchiesta
Aluminium brass tubes are highly accepted and one of the extensively used material for various industrial applications. This alloy develops a protective film that has self-healing properties. This film is dependent on oxygen, which is dissolved in the water and does not renew itself in polluted or stagnant water. High resistance to corrosion in clean seawater or inland conditions is difficult.
Aluminum Brass tubes resist the action of high-velocity salt and brackish water. The outstanding characteristic of this alloy is its superior resistance to impingement attack.
High strength combined with good general corrosion resistance and low susceptibility to stress corrosion cracking of aluminum brass tubes make it a highly preferred material for load bearing masonry fixings.
In case, the brass tubes are used in hard drawn conditions, or if they have been severely cold worked through bending or swaging in assembly, they should generally be heat treated to ensure freedom from stress corrosion cracking.
Tubi in ottone alluminio inibiti – C68700 – resiste all'azione del sale ad alta velocità e dell'acqua nerastra ed è comunemente usato per i tubi del condensatore. La caratteristica principale di C68700 è la sua elevata resistenza agli attacchi impingement. I tubi di queste leghe sono raccomandati per l'uso nelle centrali elettriche marine e terrestri, in cui le velocità dell'acqua di raffreddamento sono elevate.
Technical Specifications :
Specificazione : | ||
Aluminum Brass Tubes |
|
Standard | B 2871 PART3 | ASTM B 111 | BACCANO 1785 | NFA 51 102 | JIS H3300 | IS 1545 |
Simbolo | CZ 110 | C 68700 | CuZn20AI2 | CuZn22AI2 | C 6870 | CuZn21AI2As |
Cu | 76.0-78.0 | 76.0-79.0 | 76.0-79.0 | 76.0-79.0 | 76.0-79.0 | 76.0-78.0 |
Ale | 1.8-2.3 | 1.8-2.5 | 1.8-2.3 | 1.8-2.5 | 1.8-2.5 | 1.8-2.3 |
Pb | 0.07 | 0.07 | 0.07 | 0.07 | 0.07 | 0.07 |
Ni | – | – | 0.1 | – | – | – |
Fe | 0.06 | 0.06 | 0.07 | 0.06 | 0.06 | 0.06 |
Zn | REM’DER | REM’DER | REM’DER | REM’DER | REM’DER | REM’DER |
As | 0.02-0.06 | 0.02-0.06 | 0.02-0.35 | 0.02-0.06 | 0.02-0.06 | 0.02-0.06 |
P | – | – | 0.01 | – | – | – |
Total Impurities Max. | – | |||||
0.03 | – | 0.1 | 0.3 | – | 0.3 | |
Condizione | M | 61 | F39 | – | O | O |
TA | – | F34 | – | – | TA | |
O | – | – | – | – | D | |
Yield Strength n/mm2 | – | 125 | 1 50-230 | – | – | 400Mpa Max. |
– | 105 | 120-180 | – | – | 355Mpa Min. | |
– | – | – | – | – | 415Map | |
Tensile n/mm2 Minimum | – | 345 | 390 | – | 373 | – |
– | – | 340 | – | – | – | |
Elng’Tion Percent (%) | – | – | 45Min. | – | 40Min. | 85Max. |
– | – | 55Min. | – | – | 80-110 | |
– | – | – | – | – | 130Min. | |
Hardness HV5 – | 150Min | – | – | 80-130 | – | – |
85-110 | – | – | – | – | – | |
75Max. | – | – | – | – | – | |
Grain Size mm (75X) | 0.05Max. | 0.010-0.045 | – | 0.010-0.045 | 0.010-0.045 | 0.010-0.045 |
In caso di domande,sei più che benvenuto a contattare sales@grandsteeltube.com