Chrome Plated Round Bars
Chrome plated round bar is mostly designed to be used for hydraulic piston rod and pneumatic piston rod manufacturing and repairing. So some people also may call this product hydraulic cylinder rod approximately.
Namun, besides the above, chrome plated rods can also be used in applications where high performance surface finishing and high accuracy dimension tolerance are required.
Here below is the application list of the chrome rods:
- Hydraulic cylinders (chrome plated piston rods)
- Pneumatic cylinders / air cylinders (chrome plated piston rods)
- Guide rods for plastic manufacturing machine and hydraulic machinery
- Rollers for machines, such as packing machine rollers, printing machine rollers
- Shaft for machinery, such as Textile machinery center axle, Transport machinery center axle, dll.
- Ejector rods for injection molding machines
- Vibration absorbers and pistons for some industrial machinery.
Jika ada pertanyaan,silahkan hubungi sales@grandsteeltube.com
- Deskripsi: __________
- Advantages of Chrome Plated Bars
- Spesifikasi
- Penyelidikan
Bahan: | CK45, SAE1045, 4140, 4340, JIS45C, 40Cr, 20MnV6, 42CrMo, SS431, SS430, Stainless Steel 304/316/2205, dll. |
Diameter: | Φ 6-500mm |
Panjangnya: | max 12m |
Chrome layer: | 20 micron (Min) ke 100 micron |
Hardness of the chrome layer: | 850 HV (Min) – 1150 HV |
Roughness: | Ra ≤ 0.2μm |
Straightness: | ≤ 0.5/1000 |
Diameter tolerance: | ISO f7/h8/g6 |
Roundness: | Half of the tolerance ISO f7 |
Delivery condition: | Hard Chrome Piston Rod ( HRC 15-20) |
Quenched & Tempered (Q+T) Rod (HRC 28-32) | |
Induction Hardened Rod (HRC 55-62) | |
Q+T Induction Hardened Rod (HRC 60-65) | |
Corrosion resistance: | Test in natural salt spray according to ASTM B 117-96 hours. |
Packing: | Anti-rust oil to be spread on rod surface and each rod to be packed in paper roll and then in wooden case. |
1. Carbon steel balances durability, Kekerasan, and wear resistance using formability, kemampuan las, and durability;
2. Chrome plating provides corrosion resistance along with an Extremely reflective look
3. High precision tolerances, which ensures when used to make hydraulic piston rod, it can fit the cylinder precisely.
4. Good Hardness: the surface hardness attaining HV850 minimal and upward, which not only help improve wear resistance but also help extend the life span of these chrome plated rods, thereby helping the consumer save the cost.
5. High performance of strength: The yield strength of chrome plated bars can be 75000 psi up to 100000 Psi.
Jika ada pertanyaan,Anda dipersilakan untuk menghubungi sales@grandsteeltube.com
CHEMICAL COMPOSITION (%) |
|||||||
Bahan |
C% |
Mn% |
Si% |
S% |
P% |
V% |
Cr% |
<= |
|||||||
CK45 |
0.42-0.50 |
0.50-0.80 |
0.17-0.37 |
0.035 |
0.035 |
||
ST52 |
<=0.22 |
<=1.6 |
<=0.55 |
0.035 |
0.035 |
||
20MnV6 |
0.16-0.22 |
1.30-1.70 |
0.10-0.50 |
0.035 |
0.035 |
0.10-0.20 |
|
42CrMo4 |
0.38-0.45 |
0.60-0.90 |
0.15-0.40 |
0.03 |
0.03 |
0.90-1.20 |
|
4140 |
0.38-0.43 |
0.75-1.0 |
0.15-0.35 |
0.04 |
0.04 |
0.80-1.10 |
|
40Cr |
0.37-0.45 |
0.50-0.80 |
0.17-0.37 |
0.80-1.10 |
SIFAT MEKANIK |
|||||
Bahan |
T.S. Mpa |
Y.S. Mpa |
E% |
Impact |
Keadaan |
(Min) |
|||||
CK45 |
610 |
355 |
15 |
>39J |
Hot Rolled |
CK45 |
800 |
630 |
20 |
>41J |
Q+T |
ST52 |
630 |
520 |
14 |
Cold Drawn | |
20MnV6 |
750 |
590 |
12 |
>40J |
Hot Rolled |
42CrMo4 |
980 |
850 |
14 |
>47J |
Q+T |
4140 |
1080 |
930 |
12 |
Q+T | |
40Cr |
1000 |
800 |
10 |
Q+T |
Jika ada pertanyaan,Anda dipersilakan untuk menghubungi sales@grandsteeltube.com
Produk Terkait
-
Baca Lebih LanjutTampilan Cepat
Skived & Roller Burnished Tube
Applications of Hydraulic honed tubing
Honed tubing and SRB tubes (skived and roller burnished tubes) are mostly used as cylinder tubes, such as hydraulic cylinder tubes and pneumatic cylinder tubings which are widely used for manufacturing and repairing hydraulic cylinders and pneumatic cylinders. As honed tube usually has very accuracy dimension tolerance and good surface smoothness, so this product is also used where precision dimension or high smooth surface is needed.
Jika ada pertanyaan,silahkan hubungi sales@grandsteeltube.com
-
Baca Lebih LanjutTampilan Cepat
Tabung Silinder Stainless
Stainless steel Pneumatic Cylinder Tube diproduksi oleh stainless mulus atau dilas melalui proses produksi yang cermat.
Kelas Utama:TP304/304L, TP316/316L,1.4301,1.4304,1.4401,1.4404
Tingginya:OD9.53mm-131mm Dengan WT: 0.635-5Mm. 3M atau 6M sebagai panjangnya.
ASTM A269 dan dengan toleransi ID H10 atau H11.
Kekasaran OD ≤Ra 0.8 dan ID ≤8 Ra 0.4
Grand dapat memenuhi sifat mekanik seperti kekerasan,
kekuatan tarik, Kekuatan luluh, perpanjangan dan ovalitas dll.
Jika ada pertanyaan,silahkan hubungi sales@grandsteeltube.com
-
Baca Lebih LanjutTampilan Cepat
4140 hard chrome plated rod
Steel 4140 is AISI standard grade, it is a kind of alloy structural steel, equivalent to China standard GB 42CrMo.
SAE 4140 alloy steel has high fatigue strength and low notch sensitivity, high low temperature impact toughness, no obvious temper brittleness, and is mainly used in the quenched and tempered state. It is used to manufacture high-strength parts and parts with large cross-sections and other stress-bearing components under impact load. Such as high strength Hydraulic cylinder rods, penaumatic cylinder rods, the transmission eccentric shaft of the horizontal forging machine, the crankshaft of the forging press, dll.4140 chrome plated rod is manufactured through SAE 4140 steel bar, by using high precision centerless grinding and polishing methods, and then chrome plated to a min. plating thickness of 20 microns (0.0008″), 25 microns (0.001″), or other. The chrome plating layer provides corrosion resistance and a highly reflective appearance.
4140 chrome plated rods are used widely by the hydraulic industries and pneumatic industries, and is also widely usually used for applications where high yield strength and tensile strength is required.
-
Baca Lebih LanjutTampilan Cepat
Oil Cylinder Steel Tubes
Applications of Hydraulic honed tubing
Honed tubing and SRB tubes (skived and roller burnished tubes) are mostly used as cylinder tube, such as hydraulic cylinder tube and pneumatic cylinder tubing, which are widely used for manufacturing and repairing hydraulic cylinders and pneumatic cylinders. As honed tube has very accuracy dimension tolerance and good surface smoothness, so this product is also used in applications where precision dimension or high smooth surface is need.
Jika ada pertanyaan,silahkan hubungi sales@grandsteeltube.com
-
Baca Lebih LanjutTampilan Cepat
Hydraulic Cylinder Tubes
Applications of Hydraulic honed tubing
Honed tubing and SRB tubes (skived and roller burnished tubes) are mostly used as cylinder tube, such as hydraulic cylinder tube and pneumatic cylinder tubing, which are widely used for manufacturing and repairing hydraulic cylinders and pneumatic cylinders. As honed tube usually has very accuracy dimension tolerance and good surface smoothness, so this product is also used in applications where precision dimension or high smooth surface is need.
Jika ada pertanyaan,silahkan hubungi sales@grandsteeltube.com
-
Baca Lebih LanjutTampilan Cepat
Tabung Silinder Udara
Paduan umum No. tabung silinder udara adalah 6063 dan 6061. Keduanya hebat dalam bentuk, kemampuan las, dan ketahanan korosi bersama dengan penampilan luar biasa.
Grand juga mampu mengekstrusi paduan lain tidak. untuk tabung silinder udara, misalnya, 7000 seri, 5000 seri, 3000 seri, 2000 seri, dan 1000 seri, Konsultasikan dengan insinyur ahli kami untuk mendapatkan info lebih lanjut mengenai paduan aluminium yang luar biasa ini tidak.
-
Baca Lebih LanjutTampilan Cepat
CK45 Chrome Plated Bar
- DIN2391 Tabung Baja Presisi
- EN10305-1/4 Tabung Baja Presisi
- EN10305-2/3/5/6 Tabung Presisi
- Tabung Presisi Seri SAE
- ISO8535-1 Tabung Injeksi Bahan Bakar
- Tabung Bundy Dinding Tunggal / Doulbe
- Ketel & Tabung Baja Tekanan
- Tabung Baja Seamless Honed / SRB
- Tabung Baja Kapiler Stainless
- Tabung Stainless Mulus & Pipa
- Tabung Stainless yang Dilas & Pipa
- Suntikan & Tabung Garis Kontrol
- Tabung Paduan Nikel & Pipa
- Tabung Kapiler Non-ferrous
- Tabung Aluminium & Pipa
- Tabung Kuningan & Pipa
- Tabung Tembaga & Pipa
- Titanium Tabung & Pipa
- Tabung Sirip Diekstrusi / Dilas
- Tabung Presisi Non-Ferrous
- Tabung Baja Berbentuk Khusus
- Koil Logam / Foil / Lembaran / Strip