Alumiiniset messinkiputket C68700
Estetyt alumiiniset messinkiputket - C68700 – vastustaa nopeanopeuksisen suolan ja mustan veden vaikutusta, ja sitä käytetään yleisesti lauhdutinputkissa. C68700: n pääominaisuus on sen korkea vastustuskyky impingement-hyökkäykselle. Tämän seoksen putkia suositellaan käytettäväksi meri- ja maavoimaloissa, jossa jäähdytysveden nopeudet ovat suuria.
Jos sinulla on kysyttävää,ota rohkeasti yhteyttä sales@grandsteeltube.com
- Kuvaus: __________
- Kysely
Aluminium brass tubes are highly accepted and one of the extensively used material for various industrial applications. This alloy develops a protective film that has self-healing properties. This film is dependent on oxygen, which is dissolved in the water and does not renew itself in polluted or stagnant water. High resistance to corrosion in clean seawater or inland conditions is difficult.
Aluminum Brass tubes resist the action of high-velocity salt and brackish water. The outstanding characteristic of this alloy is its superior resistance to impingement attack.
High strength combined with good general corrosion resistance and low susceptibility to stress corrosion cracking of aluminum brass tubes make it a highly preferred material for load bearing masonry fixings.
In case, the brass tubes are used in hard drawn conditions, or if they have been severely cold worked through bending or swaging in assembly, they should generally be heat treated to ensure freedom from stress corrosion cracking.
Estetyt alumiiniset messinkiputket - C68700 – vastustaa nopeanopeuksisen suolan ja mustan veden vaikutusta, ja sitä käytetään yleisesti lauhdutinputkissa. C68700: n pääominaisuus on sen korkea vastustuskyky impingement-hyökkäykselle. Tämän seoksen putkia suositellaan käytettäväksi meri- ja maavoimaloissa, jossa jäähdytysveden nopeudet ovat suuria.
Technical Specifications :
Specification : | ||
Aluminum Brass Tubes |
|
Standardi | BS 2871 PART3 | ASTM B 111 | MELU 1785 | NFA 51 102 | JIS H3300 | IS 1545 |
Symboli | CZ 110 | C 68700 | CuZn20AI2 | CuZn22AI2 | C 6870 | CuZn21AI2As |
Cu | 76.0-78.0 | 76.0-79.0 | 76.0-79.0 | 76.0-79.0 | 76.0-79.0 | 76.0-78.0 |
Al | 1.8-2.3 | 1.8-2.5 | 1.8-2.3 | 1.8-2.5 | 1.8-2.5 | 1.8-2.3 |
Pb | 0.07 | 0.07 | 0.07 | 0.07 | 0.07 | 0.07 |
Ni | – | – | 0.1 | – | – | – |
Fe | 0.06 | 0.06 | 0.07 | 0.06 | 0.06 | 0.06 |
Zn | REM’DER | REM’DER | REM’DER | REM’DER | REM’DER | REM’DER |
As | 0.02-0.06 | 0.02-0.06 | 0.02-0.35 | 0.02-0.06 | 0.02-0.06 | 0.02-0.06 |
P | – | – | 0.01 | – | – | – |
Total Impurities Max. | – | |||||
0.03 | – | 0.1 | 0.3 | – | 0.3 | |
Condition | M | 61 | F39 | – | O | O |
TA | – | F34 | – | – | TA | |
O | – | – | – | – | D | |
Yield Strength n/mm2 | – | 125 | 1 50-230 | – | – | 400Mpa Max. |
– | 105 | 120-180 | – | – | 355Mpa Min. | |
– | – | – | – | – | 415Map | |
Tensile n/mm2 Minimum | – | 345 | 390 | – | 373 | – |
– | – | 340 | – | – | – | |
Elng’Tion Percent (%) | – | – | 45Min. | – | 40Min. | 85Max. |
– | – | 55Min. | – | – | 80-110 | |
– | – | – | – | – | 130Min. | |
Hardness HV5 – | 150Min | – | – | 80-130 | – | – |
85-110 | – | – | – | – | – | |
75Max. | – | – | – | – | – | |
Grain Size mm (75X) | 0.05Max. | 0.010-0.045 | – | 0.010-0.045 | 0.010-0.045 | 0.010-0.045 |
Jos sinulla on kysyttävää,olet enemmän kuin tervetullut ottamaan yhteyttä sales@grandsteeltube.com