Seamless Copper Tube

Advantages of Copper Tube. The primary reasons for this are: Copper is economical. The combination of easy handling, forming and joining permits savings in installation time, material and overall costs. Long-term performance and reliability mean fewer callbacks, and that makes copper the ideal, cost-effective tubing material.

Si tiene alguna pregunta,Por favor, póngase en contacto con sales@grandsteeltube.com

  • Descripción
  • Ventajas de Grand
  • Características técnicas
  • Indagación

Phosphorus-Deoxidized copper tubes – C12200 are extensively used in sugar refineries for condensers and evaporators. Deoxidized copper is the standard material for transferring heat from steam to water or air because of their excellent resistance to corrosion by fresh water and their high thermal conductivities.

Copper tubes are easy to install, inexpensive to transport and have long life spans with low maintenance. Because they are compatible with a large range of liquids and are so resistant to a wide variety of environmental conditions, tubes made of copper provide a long term performance that is extremely cost effective over long periods of time. They form piping systems both above and below ground, in freezing temperatures as well as in high heat applications. Fire sprinkler systems, cryogenic plants, air conditioning and refrigeration systems, hospital oxygen systems, gas and steam heating systems and drain/vent systems all use copper tubes as pipes. They also take up less space than other metal pipes.

In order to ensure safety and quality, all copper tubes must adhere to strict ASTM (American Society for Testing and Materials) standards concerning copper purity, design, fittings and liquid/gas compatibility. They are generally formed by the extrusion process, which fabricates seamless tubes with uniform wall thickness and a smooth surface. Solid-profile copper billets in the shape of rods are heated until malleable and then forced through a series of smaller and smaller molds in the shape of a tube until the desired shape has been reached. After extrusion, they are often bent using rollers or mandrels, and attached to each other at the ends by welding.

Most copper tubes have threaded ends, one male and one female, so they can easily attach and detach from one another. The threading is non-permanent but still provides a reliable, air and water tight seal. Sometimes tubes are joined by brazing, a welding technique that uses nonferrous filler material. A benefit of copper tubes is their flammability and explosion resistance. If a fire does start within the tube, it will not travel farther into the pipe system. Copper tubes can have either soft or hard tempers, which is the metal’s overall hardness. This is accomplished by post-fabrication heat treatments.

UNS No. C12200 – BSI No. C107 – ISO Name Cu-DHP
Composición Química. (%) Cu 99.9 / P 0.015N ~ 0.040
Especificaciones ASTM. B 75, B 111, B 395
Especificaciones ASME. SB 111, SB 395
Aplicaciones Condensador, evaporador & heat exchanger tubes; Air conditioning & refrigeración; Plumbing pipes & steam tubes.
Atemperar H55 Light Drawn / H80 Hard Drawn / O61 Recocido

 

Propiedades * Métrico Inglés
Densidad 8.94 g/cm³ 0.323 lb/in³
Resistencia a la tracción 221 ~ 379 Mpa 32 ~ 55 Ksi
Límite elástico 69 ~ 345 Mpa 10 ~ 50 Ksi
CTE, lineal 17.7 10-6/°C @ 20.0 – 300 °C 9.8 10-6/°F @ 70.0 – 570 °F
Capacidad calorífica específica 0.0920 cal/g-°C @ 20ºC 0.0920 BTU/lb-°F @ 70ºF
Conductividad térmica 339 W/m-K @ 20.0 °C 196 BTU/ft2/ft/h/°F @ 70.0 °F
Punto de fusión 1083 °C 1981 °F

Si tiene alguna pregunta,Usted es más que bienvenido a contactar sales@grandsteeltube.com

1. Trabajar con clientes de Europa,Asia Occidental,América del Norte,América del Sur, Since 2006 etc

2. Production of seamless copper tubes & pipes since 2005

2. Las muestras se pueden entregar dentro de 15 días después de la confirmación

3. 35 días como el período de producción y la entrega después de la confirmación del pedido.

4. 60,000 meters of seamless copper tubes in stock.

5. 100 tamaños se pueden ofrecer desde OD:30mmxWT:1mm a OD:133mmxWT:5milímetro

7. Inspección de terceros como:TUV,BV,SGS,etc aceptado

8. El equipo profesional le ayuda a sus necesidades especiales de tubo.

Si tiene alguna pregunta,Usted es más que bienvenido a contactar sales@grandsteeltube.com

GB ISO ASTM JIS
TU1/TU2 Cu-OF C10200 C1020
T2 Cu-RTP C11000 C1100
TP1 Cu-DLP C12000 C1201
TP2 Cu-DHP C12200 C1220

 

GB Composición(%)
Cu P O Other
TU1 99.97 0.002 less than 0.002 balance
TU2 99.95 0.002 less than 0.003 balance
T2 99.9 - - balance
TP1 99.9 0.004-0.012 - balance
TP2 99.9 0.015-0.040 - balance

 

 

ASTM Composición(%)
Cu P O Other
C10200 99.95 0.001-0.005 - balance
C11000 99.9 - - balance
C12000 99.9 0.004-0.012 - balance
C12200 99.9 0.015-0.040 - balance

 

Grado(China) Grado(Japan) Atemperar External diameter(milímetro) Tensile strength(Mpa) Alargamiento(%)
δ10 δ5
Más que
T2/T3/TP1/TP2 C11000/C1201C1220 Y more than 100 315 - -
more than 100-360 295 - -
Y2 less than 100 235-345 - -
M 3-360 205 35 40

Contacto Nos