Chrome Plated Round Bars
Chrome plated round bar is mostly designed to be used for hydraulic piston rod and pneumatic piston rod manufacturing and repairing. So some people also may call this product hydraulic cylinder rod approximately.
Sin embargo, besides the above, chrome plated rods can also be used in applications where high performance surface finishing and high accuracy dimension tolerance are required.
Here below is the application list of the chrome rods:
- Hydraulic cylinders (chrome plated piston rods)
- Pneumatic cylinders / air cylinders (chrome plated piston rods)
- Guide rods for plastic manufacturing machine and hydraulic machinery
- Rollers for machines, such as packing machine rollers, printing machine rollers
- Shaft for machinery, such as Textile machinery center axle, Transport machinery center axle, etc.
- Ejector rods for injection molding machines
- Vibration absorbers and pistons for some industrial machinery.
Si tiene alguna pregunta,Por favor, póngase en contacto con sales@grandsteeltube.com
- Descripción
- Advantages of Chrome Plated Bars
- Características técnicas
- Indagación
Material: | CK45, SAE1045, 4140, 4340, JIS45C, 40Cr, 20MnV6, 42CrMo, SS431, SS430, Acero inoxidable 304/316/2205, etc. |
Diámetro: | Φ 6-500mm |
Largura: | max 12m |
Chrome layer: | 20 micron (min) Para 100 micron |
Hardness of the chrome layer: | 850 HV (min) – 1150 HV |
Roughness: | Ra ≤ 0.2μm |
Straightness: | ≤ 0.5/1000 |
Diameter tolerance: | ISO f7/h8/g6 |
Roundness: | Half of the tolerance ISO f7 |
Delivery condition: | Hard Chrome Piston Rod ( HRC 15-20) |
Quenched & Tempered (Q+T) Barra (HRC 28-32) | |
Induction Hardened Rod (HRC 55-62) | |
Q+T Induction Hardened Rod (HRC 60-65) | |
Corrosion resistance: | Test in natural salt spray according to ASTM B 117-96 horas. |
Embalaje: | Anti-rust oil to be spread on rod surface and each rod to be packed in paper roll and then in wooden case. |
1. Carbon steel balances durability, dureza, and wear resistance using formability, Soldabilidad, and durability;
2. Chrome plating provides corrosion resistance along with an Extremely reflective look
3. High precision tolerances, which ensures when used to make hydraulic piston rod, it can fit the cylinder precisely.
4. Good Hardness: the surface hardness attaining HV850 minimal and upward, which not only help improve wear resistance but also help extend the life span of these chrome plated rods, thereby helping the consumer save the cost.
5. High performance of strength: The yield strength of chrome plated bars can be 75000 psi up to 100000 Psi.
Si tiene alguna pregunta,Usted es más que bienvenido a contactar sales@grandsteeltube.com
CHEMICAL COMPOSITION (%) |
|||||||
Material |
C% |
Mn% |
Si% |
S% |
P% |
V% |
Cr% |
<= |
|||||||
CK45 |
0.42-0.50 |
0.50-0.80 |
0.17-0.37 |
0.035 |
0.035 |
||
ST52 |
<=0.22 |
<=1.6 |
<=0.55 |
0.035 |
0.035 |
||
20MnV6 |
0.16-0.22 |
1.30-1.70 |
0.10-0.50 |
0.035 |
0.035 |
0.10-0.20 |
|
42CrMo4 |
0.38-0.45 |
0.60-0.90 |
0.15-0.40 |
0.03 |
0.03 |
0.90-1.20 |
|
4140 |
0.38-0.43 |
0.75-1.0 |
0.15-0.35 |
0.04 |
0.04 |
0.80-1.10 |
|
40Cr |
0.37-0.45 |
0.50-0.80 |
0.17-0.37 |
0.80-1.10 |
PROPIEDADES MECÁNICAS |
|||||
Material |
T.S. Mpa |
Y.S. Mpa |
E% |
Impact |
Condición |
(min) |
|||||
CK45 |
610 |
355 |
15 |
>39J |
Hot Rolled |
CK45 |
800 |
630 |
20 |
>41J |
Q+T |
ST52 |
630 |
520 |
14 |
Estirado en frío | |
20MnV6 |
750 |
590 |
12 |
>40J |
Hot Rolled |
42CrMo4 |
980 |
850 |
14 |
>47J |
Q+T |
4140 |
1080 |
930 |
12 |
Q+T | |
40Cr |
1000 |
800 |
10 |
Q+T |
Si tiene alguna pregunta,Usted es más que bienvenido a contactar sales@grandsteeltube.com
Productos Relacionados
-
Leer másVista rápida
Tubos de acero para cilindros de aceite
Aplicaciones de Tubería pulida hidráulica
Tubos pulidos y tubos SRB (tubos con deslizamiento y bruñidos con rodillos) se utilizan principalmente como tubo de cilindro, tales como tubo de cilindro hidráulico y tubo de cilindro neumático, que son ampliamente utilizados para la fabricación y reparación de cilindros hidráulicos y cilindros neumáticos. Como el tubo afilado tiene una tolerancia de dimensión muy precisa y una buena suavidad de la superficie, Por lo tanto, este producto también se utiliza en aplicaciones donde se necesita una dimensión de precisión o una superficie lisa alta..
Si tiene alguna pregunta,Por favor, póngase en contacto con sales@grandsteeltube.com
-
Leer másVista rápida
Tubo de cilindro de aire
La aleación común No. de tubos de cilindros de aire es 6063 y 6061. Ambos son excelentes en conformabilidad, Soldabilidad, y resistencia a la corrosión junto con una excelente apariencia.
Grand también es capaz de extruir otras aleaciones no. para tubos de cilindros de aire, por ejemplo, 7000 serie, 5000 serie, 3000 serie, 2000 serie, y 1000 serie, Consulte a nuestros ingenieros expertos para obtener más información sobre esta extraordinaria aleación de aluminio NO.
-
Leer másVista rápida
Hydraulic Cylinder Tubes
Aplicaciones de Tubería pulida hidráulica
Tubos pulidos y tubos SRB (tubos con deslizamiento y bruñidos con rodillos) se utilizan principalmente como tubo de cilindro, tales como tubo de cilindro hidráulico y tubo de cilindro neumático, que son ampliamente utilizados para la fabricación y reparación de cilindros hidráulicos y cilindros neumáticos. As honed tube usually has very accuracy dimension tolerance and good surface smoothness, Por lo tanto, este producto también se utiliza en aplicaciones donde se necesita una dimensión de precisión o una superficie lisa alta..
Si tiene alguna pregunta,Por favor, póngase en contacto con sales@grandsteeltube.com
-
Leer másVista rápida
4140 hard chrome plated rod
Acero 4140 is AISI standard grade, it is a kind of alloy structural steel, equivalent to China standard GB 42CrMo.
SAE 4140 alloy steel has high fatigue strength and low notch sensitivity, high low temperature impact toughness, no obvious temper brittleness, and is mainly used in the quenched and tempered state. It is used to manufacture high-strength parts and parts with large cross-sections and other stress-bearing components under impact load. Such as high strength Hydraulic cylinder rods, penaumatic cylinder rods, the transmission eccentric shaft of the horizontal forging machine, the crankshaft of the forging press, etc.4140 chrome plated rod is manufactured through SAE 4140 steel bar, by using high precision centerless grinding and polishing methods, and then chrome plated to a min. plating thickness of 20 microns (0.0008″), 25 microns (0.001″), or other. The chrome plating layer provides corrosion resistance and a highly reflective appearance.
4140 chrome plated rods are used widely by the hydraulic industries and pneumatic industries, and is also widely usually used for applications where high yield strength and tensile strength is required.
-
Leer másVista rápida
Skived & Roller Burnished Tube
Aplicaciones de Tubería pulida hidráulica
Tubos pulidos y tubos SRB (tubos con deslizamiento y bruñidos con rodillos) are mostly used as cylinder tubes, such as hydraulic cylinder tubes and pneumatic cylinder tubings which are widely used for manufacturing and repairing hydraulic cylinders and pneumatic cylinders. As honed tube usually has very accuracy dimension tolerance and good surface smoothness, so this product is also used where precision dimension or high smooth surface is needed.
Si tiene alguna pregunta,Por favor, póngase en contacto con sales@grandsteeltube.com
-
Leer másVista rápida
CK45 Chrome Plated Bar
-
Leer másVista rápida
Tubos cilíndricos de acero inoxidable
El tubo cilíndrico neumático de acero inoxidable se produce mediante acero inoxidable sin costura o soldado a través de un cuidadoso proceso de producción.
Grado principal:TP304/304L, TP316/316L,1.4301,1.4304,1.4401,1.4404
Tamaño:OD9.53mm-131mm con WT: 0.635-5milímetro. 3M o 6M como longitud.
ASTM A269 y con la tolerancia ID H10 o H11.
La rugosidad OD ≤Ra 0.8 y el ID ≤8 Ra 0.4
Grand puede cumplir con las propiedades mecánicas como la dureza,
Resistencia a la tracción, Límite elástico, elongación y ovalidad, etc..
Si tiene alguna pregunta,Por favor, póngase en contacto con sales@grandsteeltube.com
- DIN2391 Tubo de acero de precisión
- EN10305-1/4 Tubo de acero de precisión
- EN10305-2/3/5/6 Tubos de precisión
- Tubos de precisión de la serie SAE
- ISO8535-1 Tubo de inyección de combustible
- Tubo Bundy de pared Single/Doulbe
- Caldera & Tubos de acero a presión
- Tubo de acero sin costura/SRB
- Tubos de acero inoxidable capilar
- Tubos inoxidables sin costura & Tubería
- Tubos inoxidables soldados & Tubería
- Inyección & Tubos de línea de control
- Tubos de aleación de níquel & Tubería
- Tubos capilares no ferrosos
- Tubos de aluminio & Tubería
- Tubos de latón & Tubería
- Tubos de cobre & Tubería
- Tubos de titanio & Tubería
- Tubo de aleta extruida/soldada
- Tubo de precisión no ferroso
- Tubos de acero de forma especial
- Bobina metálica / lámina / hoja / tira