Types of shock absorber

Standard shock. This oil-filled shock doesn’t come with special features but can last for up to 100,000 miles. This is typically offered by OE manufacturers.

Gas shock. The gas shock is commonly used in smaller vehicles. Like the standard shock, this type also uses oil for cushion. But unlike other types, this is designed with pressurized nitrogen gas inside for keeping the shock cooler and the oil from thinning out or foaming.

Overload shock. Also known as the coil-over shock, this is usually found in off-road vehicles. Its shock cylinder has a coil spring fitted around it.

Heavy-duty shock. This type of shock is commonly used in trucks, vans, and passenger vehicles with larger loads. This comes with a larger diameter, reinforced attachment points, and bigger center shaft, designed for rugged use and for the extra load.

Automatic level control shock. The level control shock is usually used in luxury vehicles. It is equipped with an electrically operated air pump, which is activated (using sensors on the suspension) in case of added load or extra weight.

Air shock. This is an aftermarket shock absorber that is commonly installed on the rear of trucks and vans. It’s designed with an air inlet for pressurizing the shock with air and for pumping it up to raise the vehicle. But unlike the level control shock, this must be inflated.Shock absorbers are suspension components that are responsible for absorbing the impact of avehicle’s movements. Through the shocks, the vehicle’s bounce cycle is cut short. If the car encounters abump on the road, it will still bounce; however, the shocks will shorten its bounce so that the driver andpassengers will hardly feel it.

Εάν υπάρχουν ερωτήσεις,είστε περισσότερο από ευπρόσδεκτοι να επικοινωνήσετε sales@grandsteeltube.com

1. Παραγωγή συγκολλημένων & cold rolled shock absorber steel tubes since 2005.

2. Assit tubing requirements to worldwide customers since 2006.

3. Τα δείγματα μπορούν να παραδοθούν εντός 10 ημέρες μετά την επιβεβαίωση

4. 35 ημέρες ως περίοδος παραγωγής και παράδοση μετά την επιβεβαίωση της παραγγελίας.

5. 20,000 meters of welded & shock absorber steel tubes in stock.

6. 100 μεγέθη μπορούν να προσφερθούν από OD:15μμxΒΤ:1.00mm έως OD:100μμxΒΤ:5χιλ.

7. Επιθεώρηση τρίτου μέρους όπως:ΤΟΥΒ,ΒΔ,ΥΓ.,κλπ αποδεκτό

8. Η επαγγελματική ομάδα βοηθά τις ειδικές απαιτήσεις σωλήνων σας.

Εάν υπάρχουν ερωτήσεις,είστε περισσότερο από ευπρόσδεκτοι να επικοινωνήσετε sales@grandsteeltube.com