SAE J524 Seamless Steel Tube
SAE J524 covers cold drawn and annealed seamless low-carbon steel pressure tubing intended used for hydraulic lines and other applications. The J524 Seamless Hydraulic Tubing is especially favorable for flaring and bending, some industrial uses include aircraft, αυτοκίνητος, locomotive, vehicle, heavy equipment, and agricultural applications. Wiho metals supply and stock a large inventory of SAE J524 seamless tubing for the hydraulic applications and where fittings, couplings, and fluid lines are used. Επιπλέον, all of the tubes have an exceptionally bright and clean OD and ID.
Εάν υπάρχουν ερωτήσεις,είστε περισσότερο από ευπρόσδεκτοι να επικοινωνήσετε sales@grandsteletube.com
- Περιγραφή: __________
- Πλεονεκτήματα του Baosheng
- Προδιαγραφές
- Εξέταση
SAE J524 covers cold drawn and annealed seamless low-carbon steel pressure tubing intended used for hydraulic lines and other applications. The J524 Seamless Hydraulic Tubing is especially favorable for flaring and bending, some industrial uses include aircraft, αυτοκίνητος, locomotive, vehicle, heavy equipment, and agricultural applications. Wiho metals supply and stock a large inventory of SAE J524 seamless tubing for the hydraulic applications and where fittings, couplings, and fluid lines are used. Επιπλέον, all of the tubes have an exceptionally bright and clean OD and ID.
SAE J524 Tubing Equivalent Specifications
ASTM /ASME A/SA179 except for average wall, aluminum killed steel
AISI 1008/1010
EN10204 3.1.B
SAE J524 Chemical Composition
| Carbon | 0.18 .max |
| Manganese | 0.30 προς 0.6 |
| Phosphorus | ≤0.040 |
| Sulfur | ≤0.050 |
SAE J524 Mechanical Property
| Αντοχή διαρροής, min | 170 ΜΜΑ |
| Tensile Strength Min | 310 ΜΜΑ |
| Elongation Mi | 35% |
| Hardness Min | 65 HRB |
SAE J524 Seamless Tubing Tolerance
The tubing tolerances The wall thickness shall not vary more than ±10% for tubing having 12.7 mm or larger, nominal inside diameter nor more than ±15% for tubing having a smaller nominal inside diameter. Tubing outside diameter and wall thickness shall be as specified by the purchaser.
| Nominal Tubing OD, χιλ. | OD Tolerance, ± mm |
| Up to 25.4 | 0.10 |
| Over 25.4 to 38.1inclusive | 0.15 |
| Πέρα 38.1 to 50.8 inclusive | 0.20 |
| Πέρα 50.8 προς 88.9 inclusive | 0.25 |
1.Production of SAE J524 series seamless high precision tubes since 2005.
2. Συνεργασία με πελάτες από την Ευρώπη,Δυτική Ασία,Νότια Αμερική,κλπ δεδομένου ότι 2006.
3. Τα δείγματα μπορούν να παραδοθούν εντός 25 ημέρες μετά την επιβεβαίωση
4. 35 ημέρες ως περίοδος παραγωγής και παράδοση μετά την επιβεβαίωση της παραγγελίας.
5. 150,000 meters of seamless steel tubes in stock.
6. 200 μεγέθη μπορούν να προσφερθούν από OD:4μμxΒΤ:0.5mm έως OD:88.90μμxΒΤ:10χιλ.
7. Επιθεώρηση τρίτου μέρους όπως:ΤΟΥΒ,ΒΔ,ΥΓ.,κλπ αποδεκτό
8. Η επαγγελματική ομάδα βοηθά τις ειδικές απαιτήσεις σωλήνων σας.
9. Άλλοι σχετικοί σωλήνες μπορούν να προσφερθούν με ανταγωνιστικές τιμές: DIN2391,EN10305-1/4 seamless steel tubes,EN10305-2/3 welded steel tube;κλπ
Εάν υπάρχουν ερωτήσεις,είστε περισσότερο από ευπρόσδεκτοι να επικοινωνήσετε sales@grandsteletube.com
The tolerances applicable to tubing outside diameter are shown as follows. The wall thickness shall not vary more than ±10% for tubing having 12.7 mm or larger,nominal inside diameter no more than ±15% for tubing having a smaller nominal inside diameter. Tubing outside diameter and wall thickness shall be as specified by purchaser.
OD Up to 25.4mm OD Tolerance±0.10mm
Πέρα 25.4 προς 38.1 inclusive OD Tolerance±0.15mm
Πέρα 38.1 προς 50.8 inclusive OD Tolerance±0.20mm
Πέρα 50.8 προς 88.9 inclusive OD Tolerance±0.25mm
CHEMICAL REQUIREMENTS Cast or Heat Analysis Element % by Weight
Carbon Manganese Phosphorus Sulfur
0.18 .max 0.30 προς 0.60 0.040 .max 0.050 .max
MECHANICAL PROPERTIES
Yield Strength≥170 MPa, Ultimate Strength, ≥310 MPa, Elongation in 50 χιλ., ≥35% Hardness (Rockwell B)≤ 65
Εάν υπάρχουν ερωτήσεις,είστε περισσότερο από ευπρόσδεκτοι να επικοινωνήσετε sales@grandsteletube.com
Σχετικά Προϊόντα
-
Διαβάστε ΠερισσότεραΓρήγορη προβολήSeamless High Precision Tube
Synopsis of Process Routing: quality carbon steel → cold drawing → bright heat treatment without oxidization (NBK status) → nondestructive testing. In the wall honing and inside flushing under the high pressure→. Antirust oiling outside surface→ plastic capping on both ends.
Main Features: high accuracy, excellent brightness, no oxidization on the outer and inner walls after heat treatment, high cleanness inside wall. The steel tube is able to stand high pressure. No deformation after cold bending, no crack after flaring and flattening . The complicated geometrical forming and machining can be realized. Color of tube: gray with white.
Main Application: to be used in hydraulic system, automobile and in the occasion where the high precision, brightness, cleanness and mechanical properties of the tube are required.Εάν υπάρχουν ερωτήσεις,παρακαλώ επικοινωνήστε μαζί μας sales@grandsteeltube.com
-
Διαβάστε ΠερισσότεραΓρήγορη προβολήBlack Phosphate Precision Tube
Main Features: high accuracy, excellent brightness, no oxidization on the outer and inner walls after heat treatment, high cleanness inside wall. The steel tube is able to stand high pressure. No deformation after cold bending, no crack after flaring and flattening . The complicated geometrical forming and machining can be realized. bright black. Color is homogeneously distributed on the tube surface. The tube has good property of antirust.
Main Application: to be used in hydraulic system, automobile and in the occasion where the high precision, brightness, cleanness and mechanical properties of the tube are required.Εάν υπάρχουν ερωτήσεις, παρακαλώ επικοινωνήστε μαζί μας sales@grandsteeltube.com
-
Διαβάστε ΠερισσότεραΓρήγορη προβολήDiesel Engine Fuel Injection Tube
Grand supplies the worldwide leading diesel engine manufacturers with high-pressure fuel injection pipes, common-rail piping systems. Such engines power off-road vehicles, Πλοία, locomotives and electrical power generators.
All of our common rail fuel injection steel tubes are ground exactly to your specifications. Our reputation as a provider of common rail fuel injection steel tubes was built on our ability to meet and exceed the expectations of both client and industry standards.
Εάν υπάρχουν ερωτήσεις,καλώς ήρθατε να επικοινωνήσετε sales@grandsteeltube.com
-
Διαβάστε ΠερισσότεραΓρήγορη προβολήYellow Galvanized Steel Tube
1. We use high quality raw materials. All raw materials are supplied from internationally known steel makers.
2. Each batch of raw material is checked for both chemical and mechanical properties, according to specifications.
3. During the cold drawing process, our inspectors check every bundle three times: once at the beginning of the process, once during the middle, and finally, at the end of the cold drawing process.
4. During the final heat treatment, every bundle has the surface checked, as well as mechanical properties through samplings.
5. Non-destructive testing and manual inspection for each tube ensure the 100% quality rate before galvanizationΕάν υπάρχουν ερωτήσεις,παρακαλώ επικοινωνήστε μαζί μας sales@grandsteeltube.com
-
Διαβάστε ΠερισσότεραΓρήγορη προβολήOlive Green Galvanized Steel Tube
1. We use high quality raw materials for the olive green galvanized steel tube. All raw materials are supplied from internationally known steel makers.
2. Each batch of raw material is checked for both chemical and mechanical properties, according to specifications.
3. During the cold drawing process, our inspectors check every bundle three times: once at the beginning of the process, once during the middle, and finally, at the end of the cold drawing process.
4. During the final heat treatment, every bundle has the surface checked, as well as mechanical properties through samplings.
5. Non-destructive testing and manual inspection for each tube ensure the 100% quality rate before galvanizationΕάν υπάρχουν ερωτήσεις,παρακαλώ επικοινωνήστε μαζί μας sales@grandsteeltube.com
-
Διαβάστε ΠερισσότεραΓρήγορη προβολήSAE J529 Fuel Injection Tube
-
Διαβάστε ΠερισσότεραΓρήγορη προβολήSt 37.4 Black Phosphate Tube
Synopsis of Process Routing: quality carbon steel → cold drawing → bright heat treatment without oxidization (NBK status) → nondestructive testing. In the wall honing and inside flushing under the high pressure→ plastic capping on both ends→Phosphating→Antirust oiling outside surface→BundlesMain Features: high accuracy, excellent brightness, no oxidization on the outer and inner walls after heat treatment, high cleanness inside wall. The steel tube is able to stand high pressure. No deformation after cold bending, no crack after flaring and flattening . The complicated geometrical forming and machining can be realized. bright black. Color is homogeneously distributed on the tube surface. The tube has good property of antirust
Main Application: to be used in hydraulic system, automobile and in the occasion where the high precision, brightness, cleanness and mechanical properties of the tube are required.Εάν υπάρχουν ερωτήσεις,παρακαλώ επικοινωνήστε μαζί μας sales@grandsteeltube.com -
Διαβάστε ΠερισσότεραΓρήγορη προβολήHigh Pressure Fuel Injection Tube
Baosheng’s common rail fuel injection tubes are widely used for heavy-duty diesel engines precisely according to customer requirements and specifications. We supply the worldwide leading diesel engine manufacturers with high-pressure fuel injection pipes, common-rail piping systems. Such engines power off-road vehicles, Πλοία, locomotives and electrical power generators.
All of our common rail fuel injection steel tubes are ground exactly to your specifications. Our reputation as a provider of common rail fuel injection steel tubes was built on our ability to meet and exceed the expectations of both client and industry standards.
Εάν υπάρχουν ερωτήσεις,welcome to contact sales@grandsteeltube.com
-
Διαβάστε ΠερισσότεραΓρήγορη προβολήA519 Seamless Mechanical Tube
ASTM A519 specification covers for several grades of carbon and alloy steel mechanical tubing, either hot-finished or cold-finished. The steel used in the mechanical tubing may be cast in ingots or may be strand cast. When steel of different grades is sequentially strand cast, identification of the resultant transition material is required. The seamless tubing is a tubular product made without a welded seam. It is usually manufactured by hot working steel, and if necessary, by subsequently cold finishing the hot-worked tubular product to produce the desired shape, dimensions and properties. The tubes shall be furnished in the following shapes: round, square, rectangular and special sections. Heat analysis shall be made to determine the percentages of the elements specified. If secondary melting processes are used, the heat analysis shall be obtained from one remelted ingot or the product of one remelted ingot of each primary melt. The tubing shall be coated with a film of oil before shaping to retard rust when specified
Εάν υπάρχουν ερωτήσεις, παρακαλώ επικοινωνήστε μαζί μας sales@grandsteeltube.com
-
Διαβάστε ΠερισσότεραΓρήγορη προβολή100Cr6 ρουλεμάν σωλήνα χάλυβα
Ρουλεμάν χαλύβδινο σωλήνα αναφέρεται σε θερμή ή ψυχρή έλαση (ψυχρής έλξης) χαλύβδινος σωλήνας χωρίς συγκόλληση χρησιμοποιείται για την κατασκευή συνηθισμένων δακτυλίων ρουλεμάν κύλισης. Η εξωτερική διάμετρος του χαλύβδινου σωλήνα είναι 25-180mm, και το πάχος τοιχώματος είναι 3.5-20mm, που μπορεί να χωριστεί σε δύο τύπους: Συνηθισμένη ακρίβεια και μεγαλύτερη ακρίβεια. Ο χάλυβας ρουλεμάν χρησιμοποιείται για την κατασκευή σφαιρών, Κύλινδροι και δακτύλιοι ρουλεμάν. Το ρουλεμάν λειτουργεί υπό μεγάλη πίεση και τριβή, Έτσι, ο φέρων χάλυβας απαιτείται να έχει υψηλή και ομοιόμορφη σκληρότητα, αντοχή στη φθορά και υψηλό ελαστικό όριο.
Οι απαιτήσεις για την ομοιομορφία της χημικής σύνθεσης, το περιεχόμενο και την κατανομή των μη μεταλλικών εγκλεισμάτων, και η κατανομή των καρβιδίων του ρουλεμάν χάλυβα είναι πολύ αυστηρή. Είναι μία από τις πιο αυστηρές ποιότητες χάλυβα σε όλη την παραγωγή χάλυβα.
Εάν υπάρχουν ερωτήσεις, παρακαλώ επικοινωνήστε μαζί μας sales@grandsteeltube.com