Titanium rektangulært rør
Slags: Problemfri / Svejset
Formular: Runde rør/rør, Rektangulære rør / rør, Oprullede rør, “U” Form, Hydrauliske rør.
Ende: Almindelig ende, Skrå ende, Gevind.
Længde: Enkelt tilfældig, Dobbelt tilfældig, Klip længde.
KVALITETSKONTROL
Sømløst rør: Ultralyd eller hvirvelstrøm inspektion.
Svejserør: 100% Inspektion af overfladeindtrængning; 100% Røntgeninspektion.
APPLIKATIONER INDUSTRI
Farmaceutisk udstyr; Kemisk udstyr
Havvand udstyr; Varmevekslere
Kondensatorer; Papirmasse- og papirindustrien
Off-shore olieboreselskaber; Elproduktion
Petrokemikalier; Gasforarbejdning
Specialkemikalier; Lægemidler
- Beskrivelse: __________
- Undersøgelse
Compared with the round tube of the same cross-section, the titanium rectangular tube has the advantages of a lightweight, høj styrke, large bending section modulus, metal saving, and easy installation.
The current process for producing titanium seamless rectangular tubes includes a die drawing process. Titanium alloy has a close-packed hexagonal structure at room temperature, with few sliding systems involved in deformability, and difficulty to deform. It is difficult to form by drawing with a large amount of deformation. It usually requires multiple passes of drawing, and the production cycle is relatively long. . At the same time, the titanium alloy has a strong affinity with the mold material, and the deformation and temperature of the drawing process are not properly controlled. It is easy to bond with the mold, scratch the surface of the product, and the yield rate is low. Finally, in order to reduce the sliding friction between the drawing process and the mold, it is usually necessary to apply a lubricating coating. Some lubricants are volatile and will pollute the environment. Therefore, the requirements for lubricants are relatively strict, which increases production costs.
Due to the relatively high yield strength of titanium alloys, large deformation resistance, and relatively low elastic modulus, the processing process is relatively difficult, especially for titanium alloy pipes. To reduce the cost of titanium alloy rectangular tubes, it is necessary to change the existing drawing production methods, seek a new production and processing method, improve production efficiency and yield, reduce costs, and further promote in the fields of aircraft, automobiles, Skibe, osv. use.
Titanium rør er halvdelen af stålets vægt, så fordi den har en lavere masse, Det kan være lige så stærkt (som stål) ved halv vægt. Titanium sømløst rør er kendetegnet ved dets høje styrke / vægtforhold. Det er ret duktilt i et iltfrit miljø og har en lav densitet. Titanium legering rør har et meget højt smeltepunkt, hvilket er endnu større end 1650 grader celsius eller 3000 grader Fahrenheit. Titanium slangerhar det kemiske symbol Ti. ASTM B338 titaniumrør er paramagnetisk legering. Titanium svejset rør er dyrt sammenlignet med aluminium.
Titanium sømløs & Svejsede rør har dobbelt så stor styrke som aluminium & ASME SB338 titaniumrørhandler om 60% tættere end aluminium. Titanium NCF Tubes er et forsølvet farvet metal med lav densitet og høj styrke. Titanium Micro Tubes er stærke og lette, hvilket gør dem ideelle til bilindustrien, Aerospace, Militære og industrielle anvendelser. ASTM B338 kedelrør af titanlegering anses for at være et af de stærkeste metaller. Disse applikationer spænder fra medicinske implantater til fly og skibe. Pure Titanium kondensatorrør er stærkt og ætsende resistent.
Baosheng Precision Tube is specialist in Titanium Coil Tubing & vi opretholder lager af titaniumrør med lille diameter & Titaniumrør med stor diameter, Titanium kedelrør i forskellige størrelsesområder & diameter med ASTM/ASME eller NORSOK M630 specifikationer.
Hvis du ønsker at købe Høj kvalitet sikret titanium runde slanger eller Titanium tyndvægget rør til bedste pris i Kina, Send en e-mail til sales@grandsteeltube.com, vi sender dig det gratis tilbud & seneste pris på titanium præcisionsrør, Tung væg titanium rør, Titanium Dom Tubing sammen med inspektion & Leveranceplan. Titanium ovalt rør, Titanium hulrør og titanium kondensatorrør fås i forskellige størrelser, diameter & vægtykkelse.
Produktnavn
|
titanium square tube/titanium flat tube
|
Norm
|
ASTM B861,ASTM B338,ASME SB861,ASME SB338
|
Materiale
|
Pure titanium/Titanium alloy
|
Farve
|
Matal gray; Color can be customized according to material
|
Grad
|
Gr1,Gr2,Gr5,Gr7,Gr9,Gr10,Gr12
|
Funktion
|
Fine Corrosion Resistance/Light
|
Teknik
|
Seamless/welded
|
Ansøgning
|
Industrial, Heating Exchanging, Kondensator, Medicinsk, Kemisk, Aerospace, Olie, Sports, Bike etc.
|
Tolerance
|
OD(±0.1-0.2)mm,Vægtykkelse(±10%) Length(±10)mm
|
Udvendig diameter
|
Φ10×10-400×400 Mm
|
Indvendig diameter
|
≥6mm
|
Længde
|
≤18000mm
|
Vægtykkelse
|
0.5mm-15mm
|
Overflade
|
Pickling,Poleret
|
Emballage
|
Ply-wooden case, carton box
|
Form
|
Round/Square/Rectangle
|
Marking as the request
|
Ja
|
Supply Ability
|
450 Tons per Month
|